----------------------------------------------------------
                           RotaxEngines-List Digest Archive
                                      ---
                     Total Messages Posted Thu 06/18/09: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 03:51 AM - Re: Carb flooding  (JRatcli256@aol.com)
     2. 09:14 AM - Carb Flooding  (flynno)
     3. 02:18 PM - Re: Carb Flooding  (Duncan & Ami McFadyean)
 
 
 
________________________________  Message 1  _____________________________________


Time: 03:51:27 AM PST US
From: JRatcli256@aol.com
Subject: Re: RotaxEngines-List: Carb flooding


Flynn,

I had the same problem the first time I started my 912ULS. My attempted  
solution was to clean the carb that was flooding. Did this several times with 
no  improvement. Finally decided to clean the other carb. Ran fine after 
that.
Also, if you have an aux fuel pump on continuously could be over  
pressuring the float bowl.

Hope this helps -- John Ratcliffe


**************Download the AOL Classifieds Toolbar for local deals at your 
fingertips. 
(http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004)

________________________________  Message 2  _____________________________________


Time: 09:14:09 AM PST US
From: "flynno" <foxflynn@worldonline.co.za>
Subject: RotaxEngines-List: Carb Flooding

Many thanks to all for your help and suggestions, we are methodically 
going through the processes, a last ditch resort will be to take a carb 
off my 912 and install on my friends motor,wont be perfectly balanced 
but will at least eliminate one area.
Cheers again will post any results 
 Flynn

________________________________  Message 3  _____________________________________


Time: 02:18:00 PM PST US
From: "Duncan & Ami McFadyean" <ami@mcfadyean.freeserve.co.uk>
Subject: Re: RotaxEngines-List: Carb Flooding

Can also be caused by resonances, e.g. resulting from the carb rubber 
mounting clip being too loose and/or unbalanced carbs..

Duncan McF.
  ----- Original Message ----- 
  From: flynno 
  To: rotaxengines-list@matronics.com 
  Sent: Thursday, June 18, 2009 5:03 PM
  Subject: RotaxEngines-List: Carb Flooding


  Many thanks to all for your help and suggestions, we are methodically 
going through the processes, a last ditch resort will be to take a carb 
off my 912 and install on my friends motor,wont be perfectly balanced 
but will at least eliminate one area.
  Cheers again will post any results 
   Flynn


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rotaxengines-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RotaxEngines-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rotaxengines-list
Browse Digests                   http://www.matronics.com/digest/rotaxengines-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.