Today's Message Index:
----------------------
1. 04:33 AM - Re: help with bing carbs? (Thom Riddle)
2. 10:28 PM - Re: Rotax 912 ULS kicking back! Newbie needs a hand .. (cschmokel)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: help with bing carbs? |
Dashwood,
You can send your carbs to me and I'll do them but they would probably have some
hurdles to jump to get through international customs, both ways. Not sure how
that works. I've hand carryied parts across the border and back with declarations
at no cost but not sure how it works for mailed or shipped stuff.
If you decide after you get the manual that you still want someone else to do it,
I charge $50US per carb for completely disassembling cleaning inspecting everything
and re-assembling. If the carb needs new parts such as o-rings or seals,
then you pay for those parts at cost. Most mechanically inclined folks who
read the manual and work carefully can do the job themselves. If you do it yourself,
I highly recommend that you do one carb at a time. Some of the parts are
not interchangeable from side to side and you don't want to get them mixed
up.
http://riddletr.googlepages.com/a%26pmechanix
--------
Thom Riddle
Buffalo, NY
Kolb Slingshot SS-021
Jabiru 2200A #1574
Tennessee Prop 64x31
A complex system that works is invariably found to have evolved from a simple system
that works.
- John Gaule
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=268026#268026
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rotax 912 ULS kicking back! Newbie needs a hand |
..
Well, I'm embarrassed to say that it just took cranking on mag B until it finally
caught. Not used to these high compression engines!! Starts up pretty easily
now, but I'm still replacing the battery and getting the SSM. Thanks for
all your help guys!
Carl
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=268184#268184
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|