---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Wed 03/03/10: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:57 AM - Re: 912 exhaust nuts (Catz631@aol.com) 2. 12:20 PM - Re: 912 exhaust nuts (rampil) 3. 01:05 PM - Re: 912 exhaust nuts (Tommy Walker) 4. 02:26 PM - Rotax 914 enrichment solenoid wiring (rparigoris) ________________________________ Message 1 _____________________________________ Time: 05:57:03 AM PST US From: Catz631@aol.com Subject: Re: RotaxEngines-List: 912 exhaust nuts Tommy, I just replaced my exhaust nuts (and a couple of studs) last week. You are supposed to use new nuts and locktight the studs in the head. Make sure you follow the Rotax SB on the subject as you could end up deforming the flange and have it touch the head if you use too much torque. The SB addresses that. ( I think you use a normal 180 inch lbs to as low as 120 inch lbs in order to keep from touching the head...but check) IF you decide you don't want to order new nuts, (not recommended) I saved my old ones and can send you a couple if you give me your address. Dick Maddux 912 Ul Milton,Fl ________________________________ Message 2 _____________________________________ Time: 12:20:27 PM PST US Subject: RotaxEngines-List: Re: 912 exhaust nuts From: "rampil" Once you replace the lost nut, you may want to drill the angled corners of the nuts with a #55 drill and safety wire the nuts together on each exhaust flange. Only now am I really sure the nuts don't back out!! ;-) -------- Ira N224XS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=289086#289086 ________________________________ Message 3 _____________________________________ Time: 01:05:53 PM PST US Subject: RotaxEngines-List: Re: 912 exhaust nuts From: "Tommy Walker" I had to order 4 from Lockwood to get the minimum order of $10.00. Oh well, I will have extra ;) Thanks for the help all. Roger, Lockwood would only search for the part if I gave them the rotax number, so I had to show the lady how to find the number in her price list. They've had some problems with their website and parts database. I notice they took it off line a year or so ago and haven't put it back up. Thanks again, Tommy rampil wrote: > Once you replace the lost nut, you may want to drill the angled > corners of the nuts with a #55 drill and safety wire the nuts together > on each exhaust flange. Only now am I really sure the nuts don't > back out!! ;-) -------- Tommy Walker N8701 - Anniston, AL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=289088#289088 ________________________________ Message 4 _____________________________________ Time: 02:26:08 PM PST US Subject: RotaxEngines-List: Rotax 914 enrichment solenoid wiring From: "rparigoris" Does anyone know which of the two wires going to the enrichment solenoid on a Rotax 914 is the ground? I want to install a LED to indicate when the enrichment solenoid is activated. Thx. Ron Parigoris Read this topic online here: http://forums.matronics.com/viewtopic.php?p=289101#289101 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.