RotaxEngines-List Digest Archive

Wed 03/17/10


Total Messages Posted: 2



Today's Message Index:
----------------------
 
     1. 07:37 AM - Re: Re: My 912 is still not happy-- (Catz631@aol.com)
     2. 10:45 AM - Re: Re: My 912 is still not happy-- (Ollie Washburn)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:37:09 AM PST US
    From: Catz631@aol.com
    Subject: Re: My 912 is still not happy--
    Scott, Here are some other ideas you can ponder. A few months ago my engine was pretty rough when decelerating thru 4000 rpm to about 2800 rpm for landing.Like you,I synched everything so I just lived with it. I had an interest in a Kiev prop so I bought one. I removed my Warp and installed the Kiev for flight tests. I had it on and off for about 4 hours of flying. I readjusted the pitch each time to try and get the best performance. Alas, it did not work out . I could not get even my old cruise speed so I went back to my Warp.(sold the Kiev) One thing I did notice was that thru the mid range the engine was smooth as silk with the Kiev ! (as it was overall..what a nice prop )! I put the Warp back on and there was that rough mid range again (it has since abated) Perhaps the prop might contribute to the problem? I think the choke idea the guys brought up is certainly valid. I don't have a choke only a primer. My chokes are wired closed. My old nemis,diseling on shutdown (prop turns backwards about 3 revolutions) has cropped up again. I have fresh premium no alcohol fuel in my tanks too. I guess I will pour in some Octane booster and see if that stops it. I shouldn't have opened my mouth...the other shoe fell! Man, this is a full time job for me keeping this engine running good. I sure am glad I am retired and like engines! Good luck to you Scott and please keep us informed! Your problem will probably be mine tomorrow. Dick Maddux Kitfox 4-1200 Rotax 912UL Milton,Fl PS; I had the wrong Kiev prop on my plane it turns out.The wrong one was sent. Soooo I will probably give it another try. I sure loved it !!!


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:45:14 AM PST US
    Subject: Re: My 912 is still not happy--
    From: Ollie Washburn <ollies7s@gmail.com>
    I have 660 hrs. on my 912ULS and the only thing I have ever done is sync. the carbs, change plugs a couple of times and change oil @ 50 hrs. Gearbox was changed @ 250 hrs. for SB about bad metal in gears which mine had. Ollie On Wed, Mar 17, 2010 at 10:32 AM, <Catz631@aol.com> wrote: > Scott, > Here are some other ideas you can ponder. A few months ago my engine was > pretty rough when decelerating thru 4000 rpm to about 2800 rpm for > landing.Like you,I synched everything so I just lived with it. I had an > interest in a Kiev prop so I bought one. I removed my Warp and installed the > Kiev for flight tests. I had it on and off for about 4 hours of flying. I > readjusted the pitch each time to try and get the best performance. Alas, it > did not work out . I could not get even my old cruise speed so I went back > to my Warp.(sold the Kiev) One thing I did notice was that thru the mid > range the engine was smooth as silk with the Kiev ! (as it was overall..what > a nice prop )! > I put the Warp back on and there was that rough mid range again (it has > since abated) > Perhaps the prop might contribute to the problem? I think the choke idea > the guys brought up is certainly valid. I don't have a choke only a primer. > My chokes are wired closed. > My old nemis,diseling on shutdown (prop turns backwards about 3 > revolutions) has cropped up again. I have fresh premium no alcohol fuel in > my tanks too. I guess I will pour in some Octane booster and see if that > stops it. I shouldn't have opened my mouth...the other shoe fell! > Man, this is a full time job for me keeping this engine running good. I > sure am glad I am retired and like engines! > Good luck to you Scott and please keep us informed! Your problem will > probably be mine tomorrow. > Dick Maddux > Kitfox 4-1200 > Rotax 912UL > Milton,Fl > PS; I had the wrong Kiev prop on my plane it turns out.The wrong one was > sent. Soooo I will probably give it another try. I sure loved it !!! > > * > > > * > >




    Other Matronics Email List Services

  • Post A New Message
  •   rotaxengines-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RotaxEngines-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rotaxengines-list
  • Browse RotaxEngines-List Digests
  •   http://www.matronics.com/digest/rotaxengines-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --