Today's Message Index:
----------------------
1. 08:24 AM - 912ULS Water Inlet Part 922 218 (Tommy Walker)
2. 11:05 AM - Re: 912ULS Water Inlet Part 922 218 (Hugh McKay)
3. 11:53 AM - Re: 912ULS Water Inlet Part 922 218 (Craig Payne)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 912ULS Water Inlet Part 922 218 |
Listers,
I've installed a 912 in my plane using the Rotax Ring Mount. The engine seems
much less prone to vibration and kickback at startup and shutdown.
However, I do have a problem and I'm looking for solutions:
The water inlet to the water pump is a 90 degree fitting. This puts it in line
with the Ring Mount with about 2 inches clearance (maybe less). I have to run
my hose from there to my radiator and to get it to fit, I now have about a 1/2
inch or more offset on the hose in order to clear the backside of the Ring
Mount. I don't like this as it puts stress on the rubber hose.
Any ideas? Does Rotax make an inlet with perhaps a 45 degree turn instead of the
90 degree? Any help appreciated.
Tommy Walker in Alabama
N8701T
--------
Tommy Walker
N8701 - Anniston, AL
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=292221#292221
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 912ULS Water Inlet Part 922 218 |
Tommy,
Do you have the 912 Installation Manual? If so look on page 57 of the
manual. You will see figures 27 and 28 showing the water pump inlet. You
will see that there are six positions for this inlet. See if one of them
meet your needs. If you don't have this manual get one!
Hugh McKay
Allegro 2000
Rotax 912 UL
N661WW
--------------------------------------------------
From: "Tommy Walker" <twalker@cableone.net>
Sent: Monday, March 29, 2010 11:24 AM
Subject: RotaxEngines-List: 912ULS Water Inlet Part 922 218
> <twalker@cableone.net>
>
> Listers,
>
> I've installed a 912 in my plane using the Rotax Ring Mount. The engine
> seems much less prone to vibration and kickback at startup and shutdown.
>
> However, I do have a problem and I'm looking for solutions:
>
> The water inlet to the water pump is a 90 degree fitting. This puts it in
> line with the Ring Mount with about 2 inches clearance (maybe less). I
> have to run my hose from there to my radiator and to get it to fit, I now
> have about a 1/2 inch or more offset on the hose in order to clear the
> backside of the Ring Mount. I don't like this as it puts stress on the
> rubber hose.
>
> Any ideas? Does Rotax make an inlet with perhaps a 45 degree turn instead
> of the 90 degree? Any help appreciated.
>
> Tommy Walker in Alabama
> N8701T
>
> --------
> Tommy Walker
> N8701 - Anniston, AL
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=292221#292221
>
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 912ULS Water Inlet Part 922 218 |
Actually as I recall the Zenith manual for the new FWF with the ring mount
tells you to rotate (and reseal) the threaded 90 degree elbow in the plate.
I think Tommy's complaint is the 90 degree angle, not the orientation but
let's see what he says.
-- Craig
-----Original Message-----
From: owner-rotaxengines-list-server@matronics.com
[mailto:owner-rotaxengines-list-server@matronics.com] On Behalf Of Hugh
McKay
Sent: Monday, March 29, 2010 11:04 AM
Subject: Re: RotaxEngines-List: 912ULS Water Inlet Part 922 218
--> <hgmckay@bellsouth.net>
Tommy,
Do you have the 912 Installation Manual? If so look on page 57 of the
manual. You will see figures 27 and 28 showing the water pump inlet. You
will see that there are six positions for this inlet. See if one of them
meet your needs. If you don't have this manual get one!
Hugh McKay
Allegro 2000
Rotax 912 UL
N661WW
--------------------------------------------------
From: "Tommy Walker" <twalker@cableone.net>
Sent: Monday, March 29, 2010 11:24 AM
Subject: RotaxEngines-List: 912ULS Water Inlet Part 922 218
> <twalker@cableone.net>
>
> Listers,
>
> I've installed a 912 in my plane using the Rotax Ring Mount. The
> engine seems much less prone to vibration and kickback at startup and
shutdown.
>
> However, I do have a problem and I'm looking for solutions:
>
> The water inlet to the water pump is a 90 degree fitting. This puts
> it in line with the Ring Mount with about 2 inches clearance (maybe
> less). I have to run my hose from there to my radiator and to get it
> to fit, I now have about a 1/2 inch or more offset on the hose in
> order to clear the backside of the Ring Mount. I don't like this as
> it puts stress on the rubber hose.
>
> Any ideas? Does Rotax make an inlet with perhaps a 45 degree turn
> instead of the 90 degree? Any help appreciated.
>
> Tommy Walker in Alabama
> N8701T
>
> --------
> Tommy Walker
> N8701 - Anniston, AL
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=292221#292221
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|