---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Tue 05/18/10: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:08 AM - Re: 912 oil purge proceedure (dashwood) 2. 05:53 AM - Re: Re: 912 valve cover O-rings (Kevin Klinefelter) 3. 07:07 AM - Re: 912 valve cover O-rings (Roger Lee) ________________________________ Message 1 _____________________________________ Time: 05:08:45 AM PST US Subject: RotaxEngines-List: Re: 912 oil purge proceedure From: "dashwood" ok i changed the line from rad to pump . did the purge. oil leak and trail has stopped.. guage was fluctuating from 28 to 32lbs before and is now steady at 29.5lbs. 2 years ago it was steady always at 45lbs with a fairly steady decline over this time. have ordered the vdo engine mounted pressure sender and will replace soonest . is the next step to look at the releif spring and spacer washer. i always use the rotax oil filter and oil changes ever 50 hours... am averaging 100+ hours / year..always 10/40 winter or 10/50 summer full synthetic mobile 1.oil. -------- Ross Aalexander: CH701 driver 912ul 380tt Read this topic online here: http://forums.matronics.com/viewtopic.php?p=298044#298044 ________________________________ Message 2 _____________________________________ Time: 05:53:15 AM PST US From: "Kevin Klinefelter" Subject: Re: RotaxEngines-List: Re: 912 valve cover O-rings Roger, Thanks for the link to metric O-rings. I'm thinking of ordering the 105x2.5 valve cover o-rings. Do you know the size to order for the small valve cover bolt o-ring? Perhaps you have list of other o-ring sizes for the 9xx series engine? I want to put together a kit of spares for a trip to Alaska. Thanks, Kevin Europa XS, 914 ----- Original Message ----- From: "Roger Lee" Sent: Monday, May 17, 2010 10:58 AM Subject: RotaxEngines-List: Re: 912 valve cover O-rings > > http://mdmetric.com/or/oringsizelisting.htm > > -------- > Roger Lee > Tucson, Az. > Light Sport Repairman - Maintenance Rated > Rotax Repair Center > 520-574-1080 > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=297989#297989 > > > ________________________________ Message 3 _____________________________________ Time: 07:07:34 AM PST US Subject: RotaxEngines-List: Re: 912 valve cover O-rings From: "Roger Lee" The smaller inside "O" ring is 6.4 x 1.8. You can find all the "O" ring sizes for the 912 in the parts manual. -------- Roger Lee Tucson, Az. Light Sport Repairman - Maintenance Rated Rotax Repair Center 520-574-1080 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=298063#298063 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.