----------------------------------------------------------
                           RotaxEngines-List Digest Archive
                                      ---
                     Total Messages Posted Mon 08/09/10: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:25 AM - Re: Engine running rough at 3400 RPM and above  (Catz631@aol.com)
     2. 06:02 AM - Re: Re: Header wrap 3+ years later  (FLYaDIVE)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:25:31 AM PST US
From: Catz631@aol.com
Subject: Re: RotaxEngines-List: Engine running rough at 3400 RPM and above

Thanks for the info Ron !
Roger, Thanks for the "show and tell" That was great ! 
                                    Dick Maddux
                                    Milton,Fl

________________________________  Message 2  _____________________________________


Time: 06:02:00 AM PST US
Subject: Re: RotaxEngines-List: Re: Header wrap 3+ years later
From: FLYaDIVE <flyadive@gmail.com>

Roger & Gaggle:

TEFLON hoses do not require a fire sleeve for fire protection.  But as you
mention Roger, a sleeve does help in reducing heat both radiated and
received.  BUT!  One area where a bit of heat shielding goes unnoticed are
the metal connections.  The metal gets hotter than the hose.

Barry

On Sat, Aug 7, 2010 at 9:59 AM, Roger Lee <ssadiver1@yahoo.com> wrote:

>
> Hi All,
>
> All hoses of oil and fuel should have the fire sleeve on it. The ends
> should be dip coated with "End Dip" and have a band clamp as per ASTM
> standards. The fire sleeve not only protects it from fire, but does a pretty
> fair job of insulating it from radiant heat off things like the muffler.
> Where you have a coolant line close to something hot or where it might rub
> take a piece of fire sleeve and cut it down the middle lengthwise and wrap
> it at the problem location and use either a couple of wire ties or safety
> wire to hold it in place.
>
> --------
> Roger Lee
> Tucson, Az.
> Light Sport Repairman - Maintenance Rated
> Rotax Repair Center
> 520-574-1080
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=307850#307850
>
>

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rotaxengines-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RotaxEngines-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rotaxengines-list
Browse Digests                   http://www.matronics.com/digest/rotaxengines-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.