---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Sat 11/13/10: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:05 AM - Please Make A Contribution... (Matt Dralle) 1. 04:26 AM - Re: RotaxEngines-List Flying LSAs into Canada (Thom Riddle) 2. 05:25 AM - Re: 9xx banjo fitting (h&jeuropa) 3. 06:55 AM - Re: Re: 9xx banjo fitting (Kevin Klinefelter) 4. 07:30 AM - Re: Re: 9xx banjo fitting (Paul McAllister) 5. 03:15 PM - Steel braided wires from Igntion Switch to A & B modules (pestar) ________________________________ Message 0 _____________________________________ Time: 12:05:32 AM PST US From: Matt Dralle Subject: RotaxEngines-List: Please Make A Contribution... Dear Listers, A quick reminder that November is the annual List Fund Raiser. The Matronics Lists are 100% member supported and all of the operational costs are provided for my your Contributions during this time of the year. Your personal Contribution makes a big difference and keeps all of the Matronics Email Lists and Forums completely ad-free. Please make your Contribution today to keep these services up and running! http://www.matronics.com/contribution Thank you in advance! Matt Dralle Matronics Email List and Forum Administrator ________________________________ Message 1 _____________________________________ Time: 04:26:19 AM PST US Subject: RotaxEngines-List: Re: RotaxEngines-List Flying LSAs into Canada From: "Thom Riddle" Barry, Twas me, indeed. I still have my original FCC issued "Restricted Radiotelephone Operator Permit" from 1966, when there were two Rs in the bow-powered pointed projectile nemonic. Thom -------- Thom Riddle Buffalo, NY (9G0) Kolb Slingshot SS-021 Jabiru 2200A #1574 Tennessee Prop 64x32 Everyone is entitled to his own opinion, but not his own facts. Daniel Patrick Moynihan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=319271#319271 ________________________________ Message 2 _____________________________________ Time: 05:25:18 AM PST US Subject: RotaxEngines-List: Re: 9xx banjo fitting From: "h&jeuropa" Kevin, Have a look at Rotax SI-914-005 R2. There you will find on page 7 a drawing of Rotax part # 956050 which is an AN8 fitting with an 8 deg angle. Hope this helps. Jim & Heather N241BW Read this topic online here: http://forums.matronics.com/viewtopic.php?p=319275#319275 ________________________________ Message 3 _____________________________________ Time: 06:55:58 AM PST US From: "Kevin Klinefelter" Subject: Re: RotaxEngines-List: Re: 9xx banjo fitting Hi Jim & Heather, I have seen the Rotax AN8 banjo fitting. But without buying a new style oil tank with AN fittings, I would not have AN on both ends of the hose. My question was about finding a barb style banjo with an angle. Kevin > Kevin, > > Have a look at Rotax SI-914-005 R2. There you will find on page 7 a > drawing of Rotax part # 956050 which is an AN8 fitting with an 8 deg > angle. > > Hope this helps. > > Jim & Heather > N241BW > > > Read this topic online here: > ________________________________ Message 4 _____________________________________ Time: 07:30:40 AM PST US From: Paul McAllister Subject: Re: RotaxEngines-List: Re: 9xx banjo fitting Kevin, I TIG welded a couple of 8 AN - 1/2" Tube steel braze fitting adapters to the two barb fittings on top of the oil tank and effectively converted it to tank with AN fittings. The only 'messing around' part was that I had to bore the adapter so that the oil tank barb fitting would slide inside so it could be welded. The fittings came from Pegasus Auto racing and the part number was 3259-08 @ $4.00 If I can find them I'll send you some photographs. Paul ________________________________ From: Kevin Klinefelter Sent: Sat, November 13, 2010 8:53:08 AM Subject: Re: RotaxEngines-List: Re: 9xx banjo fitting Hi Jim & Heather, I have seen the Rotax AN8 banjo fitting. But without buying a new style oil tank with AN fittings, I would not have AN on both ends of the hose. My question was about finding a barb style banjo with an angle. Kevin ________________________________ Message 5 _____________________________________ Time: 03:15:17 PM PST US Subject: RotaxEngines-List: Steel braided wires from Igntion Switch to A & B modules From: "pestar" I have a Rotax 914 and am building a DynAero MCR-4s (www.dynaero.com) . Are the steel braided wires as indicated in the Rotax Installation manual Fig 58/1 page 93 an item that is supplied with the engine or is it an aircraft manufacturer supplied item. I went to connect my ignition switch up and discovered that I do not have these cables. When I purchased my kit from France I intentionally did not get any electrical components as I planned to do this in New Zealand which I am now doing hence the discovery. Could someone suggest an appropriate item and where to purchase it. Thanks Peter Read this topic online here: http://forums.matronics.com/viewtopic.php?p=319294#319294 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.