Today's Message Index:
----------------------
1. 06:26 AM - Re: Re: EIS 4000 connections (Dan Billingsley)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: EIS 4000 connections |
Thanks for the pic Brian...worth a thousand words :>)
Dan
>
>From: "ruruny@aol.com" <ruruny@aol.com>
>To: rotaxengines-list@matronics.com
>Sent: Wed, December 29, 2010 7:29:15 PM
>Subject: RotaxEngines-List: Re: EIS 4000 connections
>
>Dan,
>
>
>Attached is a pic of the CHT sensor from GRT installed as Jim described. Note
>the bolt
>
>holding the GRT ring terminal on. It looks like one black wire but that is heat
>shrink, there is
>a white wire and red wire in there.
>The existing VDO CHT sensors removed are not wasted. Look at the blue coolant
>hose.
>You see the fitting that I got from GRT tapped into the hose held in with
>clamps. It is designed
>to accept one of those VDO CHT sensors for the EIS to measure coolant temp.
>If you have sensors for a different type of engine installation, call GRT and
>see if they will do a
>trade for the proper sensors.
>
>
>Brian Unruh
>www.701builder.com
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|