Today's Message Index:
----------------------
1. 07:44 PM - Bing Type 64 Carb. Idle Mixture Setting (Hugh McKay)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Bing Type 64 Carb. Idle Mixture Setting |
In reading the Pro Carb Shop Manual for the Bing Type 64 Carbs used on
the Rotax 912 UL engine, on page 16 under section =9CIdle Mix
Setting=9D, the procedure is written as if there is only one carb.
Of course on the Rotax 912 UL (as well as 912 ULS and other 912s) there
are two carbs. I assume one would follow this procedure for one of the
carbs, and do the same for the other carb. Would you have to go back to
the first carb and re-adjust after the second carb was adjusted? Anyone
have any experience doing this?
Hugh G. McKay III
Allegro 2000
Rotax 912 UL
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|