---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Mon 04/11/11: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:24 AM - Re: 503 vs. 582 (was: Questions about radiator & duct tape on a (Goodone) 2. 12:06 PM - CARBMATE TS-111 ATTACHMENTS TO 912? (Goodone) 3. 01:25 PM - Re: Substitute for Loctite 575 (henry.voris) 4. 01:45 PM - Re: CARBMATE TS-111 ATTACHMENTS TO 912? (david park) 5. 01:47 PM - Re: CARBMATE TS-111 ATTACHMENTS TO 912? (Robert Borger) ________________________________ Message 1 _____________________________________ Time: 11:24:16 AM PST US Subject: RotaxEngines-List: Re: 503 vs. 582 (was: Questions about radiator & duct tape on a From: "Goodone" Certainly makes a lot of sense to me plus you now have two aircraft to play around with. I wish you all the best on your journey to Oshkosh. I also hope to be able to follow your adventure on my computer (as with your 2009 trip to Sun-N-Fun) and look forward to reading an article about the whole endeavor. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=336647#336647 ________________________________ Message 2 _____________________________________ Time: 12:06:52 PM PST US Subject: RotaxEngines-List: CARBMATE TS-111 ATTACHMENTS TO 912? From: "Goodone" I am considering the purchase of a Carbmate TS-111 for use in synchronizing the carburetors on my ROTAX 912 UL. The basic TS-111 seems to come with cable to connect it to your battery and two lines to connect to the engine. Must I purchase an adapter kit to attach the vacuum lines to the 912 or is the basic Carbmate TS-111 all that I need? Thanks for any info that you can provide. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=336651#336651 ________________________________ Message 3 _____________________________________ Time: 01:25:52 PM PST US Subject: RotaxEngines-List: Re: Substitute for Loctite 575 From: "henry.voris" Hi Guys, Thanks for all the help... Don't know how I survived before I found the Matronics Lists... Compared the various spec sheets and had my self convinced that the Napa "Anaerobic Gasket Maker, Napa Part #765-1189" Would do the trick. Just got off the phone with the tech guys at Permatex (877-376-2839). They said... the Napa Anaerobic Gasket Maker, Napa Part #765-1189 is the replacement part for Loctite 574... Nuf said. Roger... This for the engine of Jim Hefner's old (now my) Firefly. Thanks again everyone. Aloha Nui -------- Henry Firefly Five-Charlie-Bravo Do Not Archive Read this topic online here: http://forums.matronics.com/viewtopic.php?p=336655#336655 ________________________________ Message 4 _____________________________________ Time: 01:45:57 PM PST US From: david park Subject: RE: RotaxEngines-List: CARBMATE TS-111 ATTACHMENTS TO 912? It is easier with the two adapters that screw in to the manifold to connect the vac tubes to=2C then you only have to undo one end of balance tube and block off. Dave G-LDVO > Subject: RotaxEngines-List: CARBMATE TS-111 ATTACHMENTS TO 912? > From: goodone41@verizon.net > Date: Mon=2C 11 Apr 2011 12:04:16 -0700 > To: rotaxengines-list@matronics.com > > > > I am considering the purchase of a Carbmate TS-111 for use in synchronizi ng the carburetors on my ROTAX 912 UL. The basic TS-111 seems to come with cable to connect it to your battery and two lines to connect to the engine. Must I purchase an adapter kit to attach the vacuum lines to the 912 or is the basic Carbmate TS-111 all that I need? > > Thanks for any info that you can provide. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=336651#336651 > > > > > > > =========== =========== =========== =========== > > > ________________________________ Message 5 _____________________________________ Time: 01:47:17 PM PST US Subject: Re: RotaxEngines-List: CARBMATE TS-111 ATTACHMENTS TO 912? From: Robert Borger Goodone: I have one, it works great. It is complete. You shouldn't need anything else for your 912. Bob Borger Europa Kit #A221 N914XL, XS Tri-Gear, Intercooled 914, Airmaster C/S Prop http://www.europaowners.org/forums/gallery2.php?g2_itemId=60232 http://www.biplaneforumgallery.com/index.php?cat=10046 Europa Flying! 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117 On Apr 11, 2011, at 14:04, Goodone wrote: > > I am considering the purchase of a Carbmate TS-111 for use in synchronizing the carburetors on my ROTAX 912 UL. The basic TS-111 seems to come with cable to connect it to your battery and two lines to connect to the engine. Must I purchase an adapter kit to attach the vacuum lines to the 912 or is the basic Carbmate TS-111 all that I need? > > Thanks for any info that you can provide. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.