Today's Message Index:
----------------------
1. 09:19 AM - Rotax 912ULS Prop Settings (John Fasching)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rotax 912ULS Prop Settings |
I have been adjusting, then flying the RV-12 with trial and error
Sensenich ground-adjustasble prop blade settings. I believe I now have
the prop about where it should be. Here are the results of today's trial
from KANK airport at 7525-ft msl, density altitude 9,800-ft:
Take off climb at 68-mph WOT showed 5,040 rpm (climb rate 650 fpm +)
Level flight at 8.870-ft msl showed 5,550 rpm
Two 180-degree legs showed:
IAS 110/110
TAS 129/127
GPS 142/121
Will leave things as they are and check again from time to time.
Thanks, Roger for your information regarding this sort of thing.
John
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|