Today's Message Index:
----------------------
1. 12:24 AM - Re: Hobbs Meter (Richard Wheelwright)
2. 05:02 AM - Re: Hobbs Meter (FLYaDIVE)
3. 10:40 AM - Re: Hobbs Meter (Richard Wheelwright)
4. 01:41 PM - Re: Hobbs Meter (FLYaDIVE)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
-- If you have the UMA Taco, It has a yellow wire to connect to the Hou
r Meter, This produses power to the meter over 2800rpm, and is perfect.=0A
=0A=0A=======================
=======================0A=0ARic
hard Wheelwright=0A==================
===0A =0A=0A________________________________=0A From: Ellery Batchelder
Jr <elleryweld@aol.com>=0ATo: rotaxengines-list@matronics.com =0ASent: Sat
urday, 23 June 2012, 22:18=0ASubject: Re: RotaxEngines-List: Hobbs Meter=0A
=0A=0AYou can hook it up-with -the oil pressure sensor so it will onl
y run when it has oil pressure =0A =0AEllery Batchelder Jr. =0A-----Orig
inal Message-----=0AFrom: Damien <dgraham7@TWCNY.RR.COM>=0ATo: rotaxengines
-list <rotaxengines-list@matronics.com>=0ASent: Sat, Jun 23, 2012 5:14 pm
=0ASubject: RotaxEngines-List: Hobbs Meter=0A=0A=0AHello. I have a Zodiac 6
01 HDS with an 80 HP Rotax =0A912. I bought it from the =0Abuilder 3 years
ago. The gentleman who built it =0Awired it so that the Hobbs meter runs wh
en the =0Amaster switch is on. Once he left the master on =0Aovernight and
that ran the Hobbs overnight so he =0Amade a separate switch for the Hobbs
by taking over =0Aa switch that had been used for Nav lights. =0AI would l
ike to rewire the Nav lights. I have =0Aheard-that the Hobbs should not b
e wired to the Master but =0Ashould only run when the engine is =0Aengaged.
=0AWhat say you, members of the jury? =0AThanks. =0ARegards, =0ADamien =0A
N48TK =0A- =0Aist" target="_blank">http://www.matronics.com/Navigator?R
otaxEngines-List=0Atp://forums.matronics.com=0A_blank">http://www.matronics
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Richard:
Will you direct us to an exact link that has a UMA Hobbs Meter that records
at over 2800 RPM? I searched ACS and nothing popped up.
Thanks,
Barry
On Sun, Jun 24, 2012 at 3:23 AM, Richard Wheelwright <
rpwheelwright@yahoo.co.uk> wrote:
> If you have the UMA Taco, It has a yellow wire to connect to the Hour
> Meter, This produses power to the meter over 2800rpm, and is perfect.
>
> ===================
> Richard Wheelwright
> ===================
>
> *From:* Ellery Batchelder Jr <elleryweld@aol.com>
> *To:* rotaxengines-list@matronics.com
> *Sent:* Saturday, 23 June 2012, 22:18
>
> *Subject:* Re: RotaxEngines-List: Hobbs Meter
>
> You can hook it up with the oil pressure sensor so it will only run when
> it has oil pressure
>
> *Ellery Batchelder Jr.*
> -----Original Message-----
> From: Damien <dgraham7@TWCNY.RR.COM>
> To: rotaxengines-list <rotaxengines-list@matronics.com>
> Sent: Sat, Jun 23, 2012 5:14 pm
> Subject: RotaxEngines-List: Hobbs Meter
>
> Hello. I have a Zodiac 601 HDS with an 80 HP Rotax 912. I bought it from
> the
> builder 3 years ago. The gentleman who built it wired it so that the Hobbs
> meter runs when the
> master switch is on. Once he left the master on overnight and that ran the
> Hobbs overnight so he
> made a separate switch for the Hobbs by taking over a switch that had been
> used for Nav lights.
> I would like to rewire the Nav lights. I have heard that the Hobbs should
> not be wired to the Master but
> should only run when the engine is engaged.
> What say you, members of the jury? Thanks.
> Regards,
> Damien
> N48TK
>
>
> *
>
> ist" target="_blank">http://www.matronics.com/Navigator?RotaxEngines-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
> *
>
> *http://www.matronics.com/Navigator?Rotronics.com/" rel="nofollow" target="_blank">http://forums.matronics.co-> <http://www.matronics.com/contribution>*
>
>
> *
>
> *
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Barry,=0A--- I have the 2 1/4" Air Core 270=B0 Movement with just the
bear wires from the rear of the instrument. The Yellow wire is the 12V (tu
rned on automatically) Output at 1800 RPM. The Wiring diagram below shows a
9pin Sub D connector with pin 4 showing the Taco output. I hope this helps
.=0A-=0Ahttp://www.umainstruments.com/pdf/UMA_DB9-Tach_wiring.pdf=0A-
=0A-=0Ahttp://www.umainstruments.com/Tachometer.htm=0A-=0A=0A===
==================0A=0ARichard Wheelwrigh
t=0A=======================
=======================0A=0AFro
m: FLYaDIVE <flyadive@gmail.com>=0ATo: rotaxengines-list@matronics.com =0AS
ent: Sunday, 24 June 2012, 13:01=0ASubject: Re: RotaxEngines-List: Hobbs Me
ter=0A=0A=0ARichard: =0A=0AWill you direct us to an exact link that has a U
MA Hobbs Meter that records at over 2800 RPM? -I searched ACS and nothing
popped up.=0A=0AThanks,=0ABarry=0A=0A=0A=0AOn Sun, Jun 24, 2012 at 3:23 AM
, Richard Wheelwright <rpwheelwright@yahoo.co.uk> wrote:=0A=0A-- If you
have the UMA Taco, It has a yellow wire to connect to the Hour Meter, This
produses power to the meter over 2800rpm, and is perfect.=0A>=0A>===
==================0A>=0A>Richard Wheelwri
ght=0A>=====================0A>=0A>
=0A>From: Ellery Batchelder Jr <elleryweld@aol.com>=0A>To: rotaxengines-lis
t@matronics.com =0A>Sent: Saturday, 23 June 2012, 22:18 =0A>=0A>Subject: Re
: RotaxEngines-List: Hobbs Meter=0A>=0A>=0A>You can hook it up-with -th
e oil pressure sensor so it will only run when it has oil pressure=0A>=0A>E
llery Batchelder Jr.=0A>-----Original Message-----=0A>From: Damien <dgraham
7@TWCNY.RR.COM>=0A>To: rotaxengines-list <rotaxengines-list@matronics.com>
=0A>Sent: Sat, Jun 23, 2012 5:14 pm=0A>Subject: RotaxEngines-List: Hobbs Me
ter=0A>=0A>=0A>Hello. I have a Zodiac 601 HDS with an 80 HP Rotax 912. I bo
ught it from the=0A>builder 3 years ago. The gentleman who built it wired i
t so that the Hobbs meter runs when the=0A>master switch is on. Once he lef
t the master on overnight and that ran the Hobbs overnight so he =0A>made a
separate switch for the Hobbs by taking over a switch that had been used f
or Nav lights.=0A>I would like to rewire the Nav lights. I have heard-tha
t the Hobbs should not be wired to the Master but=0A>should only run when t
he engine is engaged.=0A>What say you, members of the jury? Thanks.=0A>Rega
rds,=0A>Damien=0A>N48TK=0A>-=0A>ist" target="_blank">http://www.matroni
cs.com/Navigator?RotaxEngines-List tp://forums.matronics.com _blank">http:/
/www.matronics.com/contribution =0A>http://www.matronics.com/Navigator?Rotr
onics.com/" rel="nofollow" target="_blank">http://forums.matronics.co-/
> =0A>=0A>=0A>ist" target="_blank">http://www.matronics.com/Navigator?Rot
axEngines-Listtp://forums.matronics.com_blank">http://www.matronics.c
========================
=======================
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Richard:
Yes, it does help. I did find the HOURMETER on ACS. The ACS site does not
mention the RPM when it starts recording nor do they mention if a sensor is
required. They are becoming more and more of a catalog shop and loosing
contact with the builders.
Thanks Rich,
Barry
On Sun, Jun 24, 2012 at 1:39 PM, Richard Wheelwright <
rpwheelwright@yahoo.co.uk> wrote:
> Barry,
> I have the 2 1/4" Air Core 270=B0 Movement with just the bear wires
> from the rear of the instrument. The Yellow wire is the 12V (turned on
> automatically) Output at 1800 RPM. The Wiring diagram below shows a 9pin
> Sub D connector with pin 4 showing the Taco output. I hope this helps.
>
> http://www.umainstruments.com/pdf/UMA_DB9-Tach_wiring.pdf
>
>
> http://www.umainstruments.com/Tachometer.htm
>
>
> ========================
====================
> Richard Wheelwright
> ===================
>
> *From:* FLYaDIVE <flyadive@gmail.com>
> *To:* rotaxengines-list@matronics.com
> *Sent:* Sunday, 24 June 2012, 13:01
>
> *Subject:* Re: RotaxEngines-List: Hobbs Meter
>
> Richard:
>
> Will you direct us to an exact link that has a UMA Hobbs Meter that
> records at over 2800 RPM? I searched ACS and nothing popped up.
>
> Thanks,
> Barry
>
> On Sun, Jun 24, 2012 at 3:23 AM, Richard Wheelwright <
> rpwheelwright@yahoo.co.uk> wrote:
>
> If you have the UMA Taco, It has a yellow wire to connect to the Hour
> Meter, This produses power to the meter over 2800rpm, and is perfect.
>
> ===================
> Richard Wheelwright
> ===================
>
> *From:* Ellery Batchelder Jr <elleryweld@aol.com>
> *To:* rotaxengines-list@matronics.com
> *Sent:* Saturday, 23 June 2012, 22:18
>
> *Subject:* Re: RotaxEngines-List: Hobbs Meter
>
> You can hook it up with the oil pressure sensor so it will only run
> when it has oil pressure
>
> *Ellery Batchelder Jr.*
> -----Original Message-----
> From: Damien <dgraham7@TWCNY.RR.COM>
> To: rotaxengines-list <rotaxengines-list@matronics.com>
> Sent: Sat, Jun 23, 2012 5:14 pm
> Subject: RotaxEngines-List: Hobbs Meter
>
> Hello. I have a Zodiac 601 HDS with an 80 HP Rotax 912. I bought it from
> the
> builder 3 years ago. The gentleman who built it wired it so that the Hobb
s
> meter runs when the
> master switch is on. Once he left the master on overnight and that ran th
e
> Hobbs overnight so he
> made a separate switch for the Hobbs by taking over a switch that had bee
n
> used for Nav lights.
> I would like to rewire the Nav lights. I have heard that the Hobbs should
> not be wired to the Master but
> should only run when the engine is engaged.
> What say you, members of the jury? Thanks.
> Regards,
> Damien
> N48TK
>
>
> *
>
> ist" target="_blank">http://www.matronics.com/Navigator?RotaxEngines-Li
st
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
> *
>
> *http://www.matronics.com/Navigator?Rotronics.com/" rel="nofollow" targ
et="_blank">http://forums.matronics.co-/> <http://www.matronics.com/cont
ribution>*
>
>
> *
>
> ist" target="_blank">http://www.matronics.com/Navigator?RotaxEngines-Li
st
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
> *
>
>
> *
>
> ist" rel=nofollow target=_blank>http://www.matronics.com/Navigator?Ro
taxEngines-List
> et=_blank>http://forums.matronics.com/
> llow target=_blank>http://www.matronics.com/contribution
> *
>
>
> *
>
===========
===========
===========
===========
> *
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|