Today's Message Index:
----------------------
1. 12:39 PM - Re: Re: Electrical problem with 912ULS (Richard Girard)
2. 01:58 PM - Re: Electrical problem with 912ULS (Roger Lee)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Electrical problem with 912ULS |
Peter, Roger et al, One of the many things impressed upon me at Rotax
school was that one should never, ever attempt to try and see the spark by
grounding a plug and cranking the engine. Unless you have an extra grand
lying around for a new ignition module.
First, as Roger noted, it's almost impossible to see. Second, a $10 tool,
an Ignition Spark Tester replaces the weak spark with a bright light that
makes the test safe and easy to do.
Ignition Spark Testers are available from sources as varied as Harbor
Freight and Snap On.
Rick Girard
On Sat, Sep 8, 2012 at 10:00 AM, Roger Lee <ssadiver1@yahoo.com> wrote:
>
> Hi Peter,
>
>
> Will the engine start at all?
> Because of our dual ignition system it would be rare that all this would
> go out at one time. it is usually a broken wire.
> The spark is so hard to see on a 912 it is best looked at in a darkened
> atmosphere. The voltage into the regulator with the two yellow wires should
> be between 18-22 volts AC. If you can't get the engine started or at least
> up to 240rpm then that would be hard to measure.
>
> --------
> Roger Lee
> Tucson, Az.
> Light Sport Repairman - Maintenance Rated
> Rotax Repair Center - Heavy Maint. Rated
> Home 520-574-1080 TRY HOME FIRST
> Cell 520-349-7056
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=382673#382673
>
>
> Attachments:
>
> http://forums.matronics.com//files/roan_generator_troubleshooting_163.pdf
>
> http://forums.matronics.com//files/how_to_diagnos_an_ignition_problem_191.docx
>
>
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Electrical problem with 912ULS |
I fully agree. If it is done wrong you can cause damage. I never look for spark
and have such a tool to check wire/plug continuity.
--------
Roger Lee
Tucson, Az.
Light Sport Repairman - Maintenance Rated
Rotax Repair Center - Heavy Maint. Rated
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=382766#382766
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|