---------------------------------------------------------- RotaxEngines-List Digest Archive --- Total Messages Posted Mon 11/12/12: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:09 AM - What's Your Contribution Used For? (Matt Dralle) 1. 08:32 AM - Airbox with servo (Luis Peromarta Regert) 2. 10:20 AM - Re: Airbox with servo (Craig Payne) 3. 11:30 PM - Re: Airbox with servo (Sacha) ________________________________ Message 0 _____________________________________ Time: 12:09:56 AM PST US From: Matt Dralle Subject: RotaxEngines-List: What's Your Contribution Used For? Dear Listers, You might have wondered at some pointd, "What's my Contribution used for?" Here are just a few examples of what your direct List support enables... It provides for the expensive, commercial-grade Internet connection used on the List. It pays for the regular system hardware and software upgrades enabling the highest performance possible for List services such as the Archive Search Engine, List Browser, and the Web Forums. It pays for the over 22 years of on-line archive data always available for instant search and access. And, it offsets the many hours spent writing, developing, and maintaining the custom applications that power these List Service such as the List Browse, Search Engine, Forums, and Wiki. But most importantly, your List Contribution enables a forum where you and your peers can communicate freely in an environment that is free from moderation, censorship, advertising, commercialism, SPAM, and computer viruses. It is YOUR CONTRIBUTION that directly enables all these aspects of Matronics List services. Please support it today with your List Contribution. Its one of the best investments you can make in your Sport! List Contribution Web Site: http://www.matronics.com/contribution or, you can send a personal check to the following address: Matronics / Matt Dralle 581 Jeannie Way Livermore, CA 94550 Thank you for your support! Matt Dralle Email List Administrator ________________________________ Message 1 _____________________________________ Time: 08:32:40 AM PST US From: Luis Peromarta Regert Subject: RotaxEngines-List: Airbox with servo Dear friends. I am new to the list. Would like to share with you my implementation of TWC's servo on a Rotax Airbox for my 912. Please find attached a couple of pics, and a link for a small video. http://youtu.be/KwuVpV9ycjo The servo has been programmed not to fully open, as in my experience, only a little hot air is enough to rise the intake temp. a good few degrees. Comments and feedback welcome! With warmest regards, Luis. ________________________________ Message 2 _____________________________________ Time: 10:20:09 AM PST US From: "Craig Payne" Subject: RE: RotaxEngines-List: Airbox with servo Who is TWC and do they have a web site? -- Craig From: owner-rotaxengines-list-server@matronics.com [mailto:owner-rotaxengines-list-server@matronics.com] On Behalf Of Luis Peromarta Regert Sent: Monday, November 12, 2012 8:31 AM Subject: RotaxEngines-List: Airbox with servo Dear friends. I am new to the list. Would like to share with you my implementation of TWC's servo on a Rotax Airbox for my 912. Please find attached a couple of pics, and a link for a small video. http://youtu.be/KwuVpV9ycjo The servo has been programmed not to fully open, as in my experience, only a little hot air is enough to rise the intake temp. a good few degrees. Comments and feedback welcome! With warmest regards, Luis. ________________________________ Message 3 _____________________________________ Time: 11:30:16 PM PST US Subject: Re: RotaxEngines-List: Airbox with servo From: Sacha Looks very nice. Can you share more details/how the servo is programmed? No a ir box on my Kitfox but thinking of installing one. Sacha On Nov 12, 2012, at 17:31, Luis Peromarta Regert wrote: > Dear friends. > > I am new to the list. Would like to share with you my implementation of TW C's servo on a Rotax Airbox for my 912. Please find attached a couple of pic s, and a link for a small video. > > http://youtu.be/KwuVpV9ycjo > > The servo has been programmed not to fully open, as in my experience, only a little hot air is enough to rise the intake temp. a good few degrees. > > Comments and feedback welcome! > > With warmest regards, > > Luis. > > > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rotaxengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RotaxEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rotaxengines-list Browse Digests http://www.matronics.com/digest/rotaxengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.