Today's Message Index:
----------------------
1. 01:40 PM - Rotax 912 exhaust pipe repair (JohnE)
2. 02:08 PM - Re: Rotax 912 exhaust pipe repair (Damien Graham)
3. 02:41 PM - Re: Rotax 912 exhaust pipe repair (bjones@dmv.com)
4. 03:22 PM - Re: Rotax 912 exhaust pipe repair (FLYaDIVE)
5. 04:12 PM - Re: Rotax 912 exhaust pipe repair (JohnE)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rotax 912 exhaust pipe repair |
The co-pilot side rear exhaust pipe cracked on me this weekend. I called a few
shops to have it repaired (overhauled), but it seems none of them work on the
smaller diameter piping. Rotax is 1 1/4 inch?
The lead time for a new replacement from the factory (Diamond) is about 10 weeks.
I looked thru the Rotax parts manual and saw their are 2 different pipes and
some kits. Mine is stainless steel. How are 912 owners fabricating their
exhausts? What shops will do this.
thanks for any info.
John
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=402426#402426
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rotax 912 exhaust pipe repair |
Try Travis Kobush. Kobushweldingandmachining.com
Regards,
Damien
N48TK
Sent from my iPad
On Jun 10, 2013, at 4:40 PM, "JohnE" <j_l_walsh@yahoo.com> wrote:
>
> The co-pilot side rear exhaust pipe cracked on me this weekend. I called a few
shops to have it repaired (overhauled), but it seems none of them work on the
smaller diameter piping. Rotax is 1 1/4 inch?
>
> The lead time for a new replacement from the factory (Diamond) is about 10 weeks.
I looked thru the Rotax parts manual and saw their are 2 different pipes
and some kits. Mine is stainless steel. How are 912 owners fabricating their
exhausts? What shops will do this.
>
> thanks for any info.
>
> John
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=402426#402426
>
>
>
>
>
>
>
>
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rotax 912 exhaust pipe repair |
I just had Precision Welding in Sebring weld new ends (that got into the
heads) onto my existing exhaust pipes for a Kitfox IV with early 912.
Lockwood apparently has used them for this specific type of job. And the
lady welder said she had done "millions" of these end replacements. The
ends were Rotax parts from Lockwood. Not sure about fabrication of new
exhaust systems.
BJ Kitfox IV 912
> <dgraham7@twcny.rr.com>
>
> Try Travis Kobush. Kobushweldingandmachining.com
> Regards,
> Damien
> N48TK
>
> Sent from my iPad
>
> On Jun 10, 2013, at 4:40 PM, "JohnE" <j_l_walsh@yahoo.com> wrote:
>
>>
>> The co-pilot side rear exhaust pipe cracked on me this weekend. I
>> called a few shops to have it repaired (overhauled), but it seems none
>> of them work on the smaller diameter piping. Rotax is 1 1/4 inch?
>>
>> The lead time for a new replacement from the factory (Diamond) is about
>> 10 weeks. I looked thru the Rotax parts manual and saw their are 2
>> different pipes and some kits. Mine is stainless steel. How are 912
>> owners fabricating their exhausts? What shops will do this.
>>
>> thanks for any info.
>>
>> John
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=402426#402426
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rotax 912 exhaust pipe repair |
Keep LQQKing John:
All you need is a Welding Shop that can do Thin Wall Stainless Steel.
AND ask them to put a PATCH over the crack. Do not let them just weld the
crack. Weld the crack and Patch for strength.
*Barry*
On Mon, Jun 10, 2013 at 4:40 PM, JohnE <j_l_walsh@yahoo.com> wrote:
>
> The co-pilot side rear exhaust pipe cracked on me this weekend. I called
> a few shops to have it repaired (overhauled), but it seems none of them
> work on the smaller diameter piping. Rotax is 1 1/4 inch?
>
> The lead time for a new replacement from the factory (Diamond) is about 10
> weeks. I looked thru the Rotax parts manual and saw their are 2 different
> pipes and some kits. Mine is stainless steel. How are 912 owners
> fabricating their exhausts? What shops will do this.
>
> thanks for any info.
>
> John
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=402426#402426
>
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rotax 912 exhaust pipe repair |
Thanks for the info. The crack in this case cut the pipe into 2 pieces. It does
look like another section of pipe could be put over it and then welded if thats
how they would do it.
[quote="BARRY CHECK 6"]Keep LQQKing John:
All you need is a Welding Shop that can do Thin Wall Stainless Steel.
AND ask them to put a PATCH over the crack. Do not let them just weld the crack.
Weld the crack and Patch for strength.
Barry
On Mon, Jun 10, 2013 at 4:40 PM, JohnE wrote:
>
> The co-pilot side rear exhaust pipe cracked on me this weekend. I called a few
shops to have it repaired (overhauled), but it seems none of them work on the
smaller diameter piping. Rotax is 1 1/4 inch?
>
> The lead time for a new replacement from the factory (Diamond) is about 10 weeks.
I looked thru the Rotax parts manual and saw their are 2 different pipes
and some kits. Mine is stainless steel. How are 912 owners fabricating their
exhausts? What shops will do this.
>
> thanks for any info.
>
> John
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=402426#402426 (http://forums.matronics.com/viewtopic.php?p=402426#402426)
>
>
>
>
>
>
>
> ==========
> -List" target="_blank">http://www.matronics.com/Navigator?RotaxEngines-List
> ==========
> http://forums.matronics.com
> ==========
> le, List Admin.
> ="_blank">http://www.matronics.com/contribution
> ==========
>
>
>
> [b]
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=402442#402442
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|