Today's Message Index:
----------------------
1. 02:49 AM - Problem on 912ULS (Max Cointe (Free))
2. 06:49 AM - Re: Problem on 912ULS (Roger Lee)
3. 07:39 AM - Oil Filter (Damien Graham)
4. 08:01 AM - Re: Problem on 912ULS (william sullivan)
5. 10:12 AM - Re: Problem on 912ULS (Max Cointe (Free))
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Problem on 912ULS |
Hi There all,
Cold start ok, run smooth @2500 rpm, when temp ok can run till 5800 rpm but
test @3850 rpm fails on EACH (same on one or the other) circuit alone :
loose 700 RPM and runs rough and not equilibrated. Back to a quasi smooth
run when on both circuits!
Any Idea?
Max Cointe
mcointe@free.fr
F-PMLH Europa XS_TriGear
Kit #560-2003 912ULS/AirmasterAP332 490 hours
F-PLDJ DynAro MCR 4S
Kit #27-2002 912ULSFR/MTProp MTV7A 1600 heures
-----Message d'origine-----
De: owner-rotaxengines-list-server@matronics.com
[mailto:owner-rotaxengines-list-server@matronics.com] De la part de
rparigoris
Envoy: mercredi 4 juillet 2012 00:36
: rotaxengines-list@matronics.com
Objet: RotaxEngines-List: I wish there was a Rotax 9XX video like this.
--> <rparigor@suffolk.lib.ny.us>
I wish there was a 9XX video like this:
http://jalopnik.com/5922349/watch-an-engine-rebuild-itself-in-this-3000+phot
o-stop+motion-video
Ron Parigoris
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=377182#377182
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Problem on 912ULS |
You need to check the ignition grounds at the switch and at the ignition modules
and check all other wires at the modules plugs. If you loose 700 rpm it can't
be running smooth as you think.
--------
Roger Lee
Tucson, Az.
Light Sport Repairman - Maintenance Rated
Rotax Repair Center - Heavy Maint. Rated
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=422435#422435
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Sent from my iPad
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Problem on 912ULS |
- Max- Are you talking about a magneto test?- If so, you may have a dir
ty plug or bad wire on each circuit.=0A=0A-----------
-------------------------
-------------------------
-- Bill Sullivan=0A=0A=0A=0A=0A________________________________=0A From
: Max Cointe (Free) <mcointe@free.fr>=0ATo: rotaxengines-list@matronics.com
=0ASent: Sunday, April 27, 2014 5:48 AM=0ASubject: RotaxEngines-List: Prob
(Free)" <mcointe@free.fr>=0A=0AHi There all,=0A=0ACold start ok, run smoot
h @2500 rpm, when temp ok can run till 5800 rpm but=0Atest @3850 rpm fails
on EACH (same on one or the other) circuit alone :=0Aloose 700 RPM and runs
rough and not equilibrated. Back to a quasi smooth=0Arun when on both circ
===============
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Problem on 912ULS |
Hi Bill and Roger Lee,
Thks both for your answers. As a matter of fact I just mixed and matched
the
plugs on cylinders 2 and 4 on the lower sparks. So on one mag whichever
it
was the cylinders 2 and 4 weren=92t lighted. So I have asked someone to
kick
my a.. after having reconnected everything right!
Have good flights, rgds
Max Cointe
<mailto:mcointe@free.fr> mcointe@free.fr
F-PMLH Europa XS_TriGear
Kit #560-2003 912ULS/AirmasterAP332 490 hours
F-PLDJ Dyn=92A=E9ro MCR 4S
Kit #27-2002 912ULSFR/MTProp MTV7A 1600 heures
De : owner-rotaxengines-list-server@matronics.com
[mailto:owner-rotaxengines-list-server@matronics.com] De la part de
william
sullivan
Envoy=E9 : dimanche 27 avril 2014 17:01
=C0 : rotaxengines-list@matronics.com
Objet : Re: RotaxEngines-List: Problem on 912ULS
Max- Are you talking about a magneto test? If so, you may have a
dirty
plug or bad wire on each circuit.
Bill
Sullivan
_____
From: Max Cointe (Free) <mcointe@free.fr>
Sent: Sunday, April 27, 2014 5:48 AM
Subject: RotaxEngines-List: Problem on 912ULS
<mcointe@free.fr>
Hi There all,
Cold start ok, run smooth @2500 rpm, when temp ok can run till 5800 rpm
but
test @3850 rpm fails on EACH (same on one or the other) circuit alone :
loose 700 RPM and runs rough and not equilibrated. Back to a quasi
smooth
run when on both circuits!
Any ref="http://www.matronics.com/Navigator?RotaxEngines-List"
target="_bla//forums.matronics.com/" = -->
<http://www.matronics.com/contribution>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|