----------------------------------------------------------
                           RotaxEngines-List Digest Archive
                                      ---
                     Total Messages Posted Wed 08/20/14: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:29 AM - Re: RotaxEngines-List Re: rough running at 3400 RPM and above  (MacDonald Doug)
     2. 06:03 AM - Re: Re: rough running at 3400 RPM and above  (vernon mitchell)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:29:24 AM PST US
From: MacDonald Doug <dougsnash@yahoo.com>
Subject: RotaxEngines-List: Re: RotaxEngines-List Re: rough running at 3400 RPM
and above

Kyle, I'm not sure if I'm the Doug you are referring to or not but I had a 
similar issue with my engine when I first started running it on my plane an
d the issue was the chokes were not closed completely.- At higher RPM, sa
y 3400 RPM and higher, the enrichener/choke circuit acts like an airbleed i
nto the intake system which causes a lean stumble (thus why carb heat helps
).- As for the rich indications on the-plugs, I have no idea but first 
step is make sure your enricher circuit is absolutely closed after the engi
ne starts.=0A=0ADoug M=0ACH-701/ Rotax 912UL=0A=0A =0A=0A__________________
______________=0A--=0ATime: 10:08:05 AM PST US=0ASubject: RotaxEngines-
List: Re: rough running at 3400 RPM and above=0AFrom: "kyle Ponsford" <wild
_kyle@hotmail.com>=0A=0A=0ADoug,=0AYour descriptions read as if I had writt
en them myself, therefore I was very eager=0Ato read to the bottom and see 
your eventual solution, but I found... NOTHING!=0ADid you ever solve your p
roblem? I have not.

________________________________  Message 2  _____________________________________


Time: 06:03:20 AM PST US
From: "vernon mitchell" <vernon11@xsinet.co.za>
Subject: Re: RotaxEngines-List: Re: rough running at 3400 RPM and above


Kyle.
       I might have missed something, but have you had the carbs balanced. I 
had all sorts of drama, until the carbs were balanced.
Good luck.
Vernon.
South Africa.

--------------------------------------------------
From: "kyle Ponsford" <wild_kyle@hotmail.com>
Sent: Wednesday, August 20, 2014 1:22 AM
Subject: RotaxEngines-List: Re: rough running at 3400 RPM and above

> <wild_kyle@hotmail.com>
>
> Johann G.,
> I am grateful for your information/suggestion and will tackle that idea 
> immediately!
> Thanks,
> - Kyle
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=428799#428799
>
>
> 


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rotaxengines-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RotaxEngines-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rotaxengines-list
Browse Digests                   http://www.matronics.com/digest/rotaxengines-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.