Today's Message Index:
----------------------
0. 08:46 AM - Just Two Days Left! - Still Behind... (Matt Dralle)
1. 08:42 AM - Re: SB-912-065/914-046 (Richard Girard)
2. 08:57 AM - Re: SB-912-065/914-046 (FLYaDIVE)
Message 0
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Just Two Days Left! - Still Behind... |
Dear Listers,
There are just two more days left in this years List Fund Raiser. We are still
way behind last year in terms of the number of contributions and total contribution
amount. I really want to keep providing these services to the homebuilt
community, but it take resources. Since there's no advertising budget or deep
pockets to keep the operation a float, its solely your generosity during the
Fund Raiser that keeps things going. Please make a Contribution today.
If you've been putting off showing your support for the Lists, now is the time
to do it!
Make a contribution with a Credit Card or though PayPal at that Matronics Contribution
web site:
http://www.matronics.com/contribution
Or, drop a check in the mail:
Matronics / Matt Dralle
581 Jeannie Way
Livermore, CA 94550
Thank you in advance for your support!
Matt Dralle
Matronics Email List Administrator
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: SB-912-065/914-046 |
Vernon, When I called Lockwood tech support I was told the procedure is to
order new floats and with them will come a warranty form. Fill out the
form, send it in with the old floats and you get a refund. So, yes, it
appears Rotax is supporting the S/B. Now all we need are new floats.
Rick
On Wed, Nov 26, 2014 at 7:11 AM, vernon mitchell <vernon11@xsinet.co.za>
wrote:
> Shocking, that it is taking so long to sort out. Will Rotax replace them
> free of charge?
> Vernon
>
> *From:* Richard Girard <aslsa.rng@gmail.com>
> *Sent:* Wednesday, November 26, 2014 4:31 AM
> *To:* rotaxengines-list@matronics.com
> *Subject:* RotaxEngines-List: SB-912-065/914-046
>
> Did the weight check per the Service Bulletin and found a heavy float. You
> can see the crack on the lower edge of the left hand float in the picture.
> Called both Lockwood and the Bing Agency to get the status of new float
> availability. None at this time, Rotax is working with Bing and Bing's
> float supplier to fix the problem. Fortunately, I saved the old floats when
> I rebuilt the carbs 18 months ago.
>
> Rick Girard
>
>
> Believe those who are seeking the truth, doubt those who find it.
> -Andre Gide
>
> *
>
>
> *
>
>
--
Believe those who are seeking the truth, doubt those who find it.
-Andre Gide
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: SB-912-065/914-046 |
Rick:
did you get that in writing? Does their website support what was said.
Barry
On Fri, Nov 28, 2014 at 11:34 AM, Richard Girard <aslsa.rng@gmail.com>
wrote:
> Vernon, When I called Lockwood tech support I was told the procedure is to
> order new floats and with them will come a warranty form. Fill out the
> form, send it in with the old floats and you get a refund. So, yes, it
> appears Rotax is supporting the S/B. Now all we need are new floats.
>
> Rick
>
> On Wed, Nov 26, 2014 at 7:11 AM, vernon mitchell <vernon11@xsinet.co.za>
> wrote:
>
>> Shocking, that it is taking so long to sort out. Will Rotax replace
>> them free of charge?
>> Vernon
>>
>> *From:* Richard Girard <aslsa.rng@gmail.com>
>> *Sent:* Wednesday, November 26, 2014 4:31 AM
>> *To:* rotaxengines-list@matronics.com
>> *Subject:* RotaxEngines-List: SB-912-065/914-046
>>
>> Did the weight check per the Service Bulletin and found a heavy float.
>> You can see the crack on the lower edge of the left hand float in the
>> picture.
>> Called both Lockwood and the Bing Agency to get the status of new float
>> availability. None at this time, Rotax is working with Bing and Bing's
>> float supplier to fix the problem. Fortunately, I saved the old floats when
>> I rebuilt the carbs 18 months ago.
>>
>> Rick Girard
>>
>>
>>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|