---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Wed 06/30/04: 25 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:00 AM - Arlington (Wheeler North) 2. 04:31 AM - Re: 48 States Report (Jerry Springer) 3. 04:48 AM - Re: Care of plexiglass (Jerry Calvert) 4. 04:59 AM - Van's Capacitive Fuel level sensors (Trampas) 5. 05:55 AM - Re: Van's Capacitive Fuel level sensors (Dan Checkoway) 6. 06:26 AM - Re: RV-List Digest: 34 Msgs - 06/29/04 (Glen Matejcek) 7. 07:28 AM - Re: 48 States Report (Charlie Kuss) 8. 08:23 AM - Re: 48 States Report (Dj Merrill) 9. 08:37 AM - Re: Van's Capacitive Fuel level sensors (Terry Watson) 10. 09:00 AM - Re: Re: RV-List Digest: 34 Msgs - 06/29/04 (Dj Merrill) 11. 12:49 PM - Re: 48 States Report (Lwfeatherston@aol.com) 12. 02:57 PM - Fuel Valve (Stan J. Jones) 13. 03:22 PM - Re: Fuel Valve (Konrad Werner) 14. 03:46 PM - Re: Fuel Valve (Stein Bruch) 15. 06:22 PM - Re: ignition problem (Dave Hyde) 16. 06:33 PM - Re: Re: ignition problem (JusCash@aol.com) 17. 06:38 PM - Re: Fuel Valve (Stewart, Michael (ISS Atlanta)) 18. 07:14 PM - Re:Fuel Valve (Oldsfolks@aol.com) 19. 07:30 PM - Re: Trutrack alt hold (N223RV@aol.com) 20. 08:34 PM - Aircraft Performance numbers -NOT RV BUILDER RELATED (Tim Bryan) 21. 08:34 PM - Re: Fuel Valve (Skylor Piper) 22. 08:48 PM - Re: Re:Fuel Valve (Stein Bruch) 23. 09:14 PM - Re: Care of plexiglass (Eustace Bowhay) 24. 09:23 PM - Re: Care of plexiglass (Karie Daniel) 25. 09:44 PM - Re: Aircraft Performance numbers -NOT RV BUILDER RELATED (Brian Kraut) ________________________________ Message 1 _____________________________________ Time: 12:00:02 AM PST US From: Wheeler North "'owner-rv-list-server@matronics.com '"@matronics.com Subject: RV-List: Arlington --> RV-List message posted by: Wheeler North Check the airshow times, arriving at 1300 local may be cause for a long delay getting in. arrive via notam, be prepared for tower to be non-responsive, ie acknowledging your reporting, but not giving much sequencing response. As it gets busy they get more active in providing direction. W do not archive ________________________________ Message 2 _____________________________________ Time: 04:31:02 AM PST US From: Jerry Springer Subject: Re: RV-List: 48 States Report --> RV-List message posted by: Jerry Springer Wheeler North wrote: >--> RV-List message posted by: Wheeler North > >Folks, > >you are on this distribution list because I thought you might like to >recieve updates from me on the trip I am about to start. > >If you do not wish to recieve these please pop me a note and I'll drop you >off the list. > >The current plan has me at T minus 3 days, with launch on this Friday >morning. > >First stop is Minden NV, then Scapoose Oregon. If time permits I will >continue on to Arlington WA that day, or else I'll pop over to Vernonia for >the night. I'm supposed to be on the setup crew for the NWEAA flyin from >7.3-7.11, I'll be in that area for the week so would love to drop by and >visit if any of you local to the area are going to be around. > > > Wheeler what is the N# of your airplane so we can look you up at Arlington? Jerry Springer ( N906GS) ________________________________ Message 3 _____________________________________ Time: 04:48:09 AM PST US From: "Jerry Calvert" Subject: Re: RV-List: Care of plexiglass --> RV-List message posted by: "Jerry Calvert" Is this the Meguiars Mirror Glaze or another brand? Jerry Calvert Edmond Ok RV6 N296JC ----- Original Message ----- From: "Eustace Bowhay" Subject: RV-List: Care of plexiglass > --> RV-List message posted by: "Eustace Bowhay" > > What has worked best for me over the years is the following. > > Use only flannel cloth ( ripped old bed sheet into sixteen inch squares) then store them in a plastic bag. > > If wind screen (canopy) is dusty (stored for awhile) rinse off with water without touching the plexi by (spraying or pouring water over it. Then with a piece of clean flannel soaked in slightly soapy water and partially wrung out, take it by two corners and drag it full width over the plexi without any pressure on it, turn it over and do it a second time then put the flannel in a plastic bag to washing. > > If there are bugs take another clean cloth soaked in the soapy water gently clean them off. Put this cloth in the bag for washing. > > I have used Mirror Glaze for around forty years and would use nothing else, recently a friend asked me to try some Plexus and found it to be a good product. Again taking another clean cloth spray on the cleaner and wipe dry, another cloth for the laundry bag. > > This may sound a bit like over- kill but it is the only way I could be sure of not winding up with some scratches. > > I have flown many aircraft that had scratched plexi and found that by using Mirror Glaze all but the worst scratches would eventually disappear. > > If the canopy is new and scratch free the Plexus will sure do the job and is quicker to use. > > Anyway the whole idea is prevent getting any scratches in the first place and the only way I have been able to do that is not rub with any gritty stuff on the plexi. > > Eustace Bowhay Blind Bay, B.C. > > Eustace Bowhay > > ________________________________ Message 4 _____________________________________ Time: 04:59:36 AM PST US From: "Trampas" Subject: RV-List: Van's Capacitive Fuel level sensors --> RV-List message posted by: "Trampas" Does anyone know of a company which sells an adapter circuit for the Van's capacitive fuel level sensors? For my application it does not matter if the sensor outputs a frequency or a voltage. Thanks Trampas ________________________________ Message 5 _____________________________________ Time: 05:55:16 AM PST US From: "Dan Checkoway" Subject: Re: RV-List: Van's Capacitive Fuel level sensors --> RV-List message posted by: "Dan Checkoway" You might consider calling Advanced Control Systems (http://www.advanced-control-systems.com). I doubt they'd distribute just the adapters if you're not buying the ACS2002 system. The adapters they use come from Princeton Electronics. You can contact Todd at Princeton at 616-281-5193. Best of luck, )_( Dan RV-7 N714D http://www.rvproject.com ----- Original Message ----- From: "Trampas" Subject: RV-List: Van's Capacitive Fuel level sensors > --> RV-List message posted by: "Trampas" > > Does anyone know of a company which sells an adapter circuit for the Van's > capacitive fuel level sensors? For my application it does not matter if the > sensor outputs a frequency or a voltage. > > Thanks > Trampas > > ________________________________ Message 6 _____________________________________ Time: 06:26:27 AM PST US From: "Glen Matejcek" Subject: RV-List: RE: RV-List Digest: 34 Msgs - 06/29/04 --> RV-List message posted by: "Glen Matejcek" >Glen, I and 2 of my friends want to thank you for taking our share of >the bird strikes. Could you be so kind as to also do our share of the >engine outs too? :-) Hmmm... You AND two friends? That puts me one behind... No promises, but I'll see what I can do... I do have about 1,300 forced landings I could share with you ; ) Do not archive ________________________________ Message 7 _____________________________________ Time: 07:28:56 AM PST US From: Charlie Kuss Subject: Re: RV-List: 48 States Report --> RV-List message posted by: Charlie Kuss Wheeler, How far down the Florida peninsula do you plan to go? I'm in Boca Raton (in Palm Beach County on the SE coast) Let me know if you'll be in the area. Charlie Kuss >--> RV-List message posted by: Wheeler North > >Folks, > >you are on this distribution list because I thought you might like to >recieve updates from me on the trip I am about to start. > >If you do not wish to recieve these please pop me a note and I'll drop you >off the list. > >The current plan has me at T minus 3 days, with launch on this Friday >morning. > >First stop is Minden NV, then Scapoose Oregon. If time permits I will >continue on to Arlington WA that day, or else I'll pop over to Vernonia for >the night. I'm supposed to be on the setup crew for the NWEAA flyin from >7.3-7.11, I'll be in that area for the week so would love to drop by and >visit if any of you local to the area are going to be around. > >After the flyin the plan is to head east until Maine goes by, then south >until Florida appears, then back west until Texas, then up the Mississippi >to Oshkosh for the big flyin, and then zigzag back to San Diego in early >August, thereby landing in every state in the lower 48. > >Obviously the weather will help plan my route so it isn't too firm right >now. But my plan is to post an update daily, as time permits. > >Again, if this is too much email for you, reply and I'll take you out of the >loop, as I am certainly sensitive to too much email. I won''t be posting >pictures other than to a website, if I get a land line connection as the >cell connection is somewhat too slow for picture uploads. > >I'll probably send the next note out Thursday night just before I get on the >road. > >ta ta for now > >Wheeler > > ________________________________ Message 8 _____________________________________ Time: 08:23:03 AM PST US From: Dj Merrill Subject: Re: RV-List: 48 States Report --> RV-List message posted by: Dj Merrill Wheeler North wrote: > After the flyin the plan is to head east until Maine goes by, then south Wave when you go over NH! :-) -Dj ________________________________ Message 9 _____________________________________ Time: 08:37:27 AM PST US From: "Terry Watson" Subject: RE: RV-List: Van's Capacitive Fuel level sensors --> RV-List message posted by: "Terry Watson" Blue Mountain Avionics (bluemountainavionics.com) has one to adapt Van's sensors to their EFIS/one. Terry --> RV-List message posted by: "Trampas" Does anyone know of a company which sells an adapter circuit for the Van's capacitive fuel level sensors? For my application it does not matter if the sensor outputs a frequency or a voltage. Thanks Trampas ________________________________ Message 10 ____________________________________ Time: 09:00:28 AM PST US From: Dj Merrill Subject: Re: RV-List: RE: RV-List Digest: 34 Msgs - 06/29/04 --> RV-List message posted by: Dj Merrill Glen Matejcek wrote: > I do have about 1,300 forced landings I could share with you ; ) > Do not archive Glider pilot? ;-) -Dj ________________________________ Message 11 ____________________________________ Time: 12:49:38 PM PST US From: Lwfeatherston@aol.com Subject: Re: RV-List: 48 States Report --> RV-List message posted by: Lwfeatherston@aol.com Hi Wheeler, I think I am on your route. I would love to host you in Southwest Missouri as you pass through. See if Mt Vernon, MO, between Joplin, and Springfield, is on your Texas to OSH route. I have AvGas 100LL, and can hangar you, and feed you. Give me an e-mail with your estimated ETA. Les Featherston 417-466-4663 ________________________________ Message 12 ____________________________________ Time: 02:57:11 PM PST US From: "Stan J. Jones" Subject: RV-List: Fuel Valve --> RV-List message posted by: "Stan J. Jones" I am not at all familiar with injected motors. Is there a fuel return line from the motor on an IO 360, and do I need to order one of those fancy fuel valves that Vans sells, ($350), in order to return surplus fuel to the tank, and do I need to plumb up two new fuel lines for that purpose. Stan Jones. N.Z. ________________________________ Message 13 ____________________________________ Time: 03:22:17 PM PST US From: "Konrad Werner" Subject: Re: RV-List: Fuel Valve --> RV-List message posted by: "Konrad Werner" >I am not at all familiar with injected motors. >Is there a fuel return line from the motor on an IO 360, No, not on a Lycoming >. . . and do I need to order one of those fancy fuel valves that Vans sells, ($350), No, standard fuel valve is fine. >. . . in order to return surplus fuel to the tank, No >. . . and do I need to plumb up two new fuel lines for that purpose. No >Stan Jones. N.Z. Konrad do not archive ________________________________ Message 14 ____________________________________ Time: 03:46:18 PM PST US From: "Stein Bruch" Subject: RE: RV-List: Fuel Valve --> RV-List message posted by: "Stein Bruch" Nope. Plumbing is similar to the O engines, but the Fuel pressure is much higher, necessitating a higher pressure boost pump and engine driven pump. Cheers, Stein Bruch RV6's, Minneapolis. -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com]On Behalf Of Stan J. Jones Subject: RV-List: Fuel Valve --> RV-List message posted by: "Stan J. Jones" I am not at all familiar with injected motors. Is there a fuel return line from the motor on an IO 360, and do I need to order one of those fancy fuel valves that Vans sells, ($350), in order to return surplus fuel to the tank, and do I need to plumb up two new fuel lines for that purpose. Stan Jones. N.Z. ________________________________ Message 15 ____________________________________ Time: 06:22:23 PM PST US From: "Dave Hyde" Subject: RV-List: re: ignition problem --> RV-List message posted by: "Dave Hyde" Problem solved. Steve Carter at Unison arranged for me to pick up a new mag at a nearby parts shop. Installed it this evening and the engine runs great. I'd love to know what was going on in there, but the mag is still under warranty so I'm not going to crack the case. Troubleshooting was extremely frustrating, but Unison bent over backwards to help, and as far as I'm concerned more than made up for the troubles. Dave Hyde nauga@brick.net RV-4 in flight test, EAA tech counselor ________________________________ Message 16 ____________________________________ Time: 06:33:14 PM PST US From: JusCash@aol.com Subject: Re: RV-List: re: ignition problem --> RV-List message posted by: JusCash@aol.com There is a really good article in the July 2004 Aviation Consumer about Slick and Bendix magnetos. Cash Copeland In a message dated 6/30/2004 6:23:25 PM Pacific Daylight Time, nauga@brick.net writes: --> RV-List message posted by: "Dave Hyde" Problem solved. Steve Carter at Unison arranged for me to pick up a new mag at a nearby parts shop. Installed it this evening and the engine runs great. I'd love to know what was going on in there, but the mag is still under warranty so I'm not going to crack the case. Troubleshooting was extremely frustrating, but Unison bent over backwards to help, and as far as I'm concerned more than made up for the troubles. Dave Hyde nauga@brick.net RV-4 in flight test, EAA tech counselor ________________________________ Message 17 ____________________________________ Time: 06:38:09 PM PST US Subject: RE: RV-List: Fuel Valve From: "Stewart, Michael (ISS Atlanta)" --> RV-List message posted by: "Stewart, Michael (ISS Atlanta)" And to add to the other 2 responses which are correct, the return you are referring to is a special return line used in the Airflow Performance FI system specifically. It is not required, even on theirs. Mike AFP system. Do not archive -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Stan J. Jones Subject: RV-List: Fuel Valve --> RV-List message posted by: "Stan J. Jones" I am not at all familiar with injected motors. Is there a fuel return line from the motor on an IO 360, and do I need to order one of those fancy fuel valves that Vans sells, ($350), in order to return surplus fuel to the tank, and do I need to plumb up two new fuel lines for that purpose. Stan Jones. N.Z. == == == == ________________________________ Message 18 ____________________________________ Time: 07:14:22 PM PST US From: Oldsfolks@aol.com Subject: RV-List: Re:Fuel Valve --> RV-List message posted by: Oldsfolks@aol.com You will need a fuel return line to your fuel tank. Mine runs to the left tank. This means that I MUST use fuel from the left tank first. If I fail to select the left tank, when both are full, I will soon overflow the left tank and fuel will be discharged through the left vent line. I'm not familiar with the expensive valve from Vans but it probably just shifts the return line to flow into the same tank you are drawing from. Hope this helps, Bob Olds RV-4 , N1191X A&P , EAA Tech. Counselor Charleston,Arkansas Real Aviators Fly Taildraggers ________________________________ Message 19 ____________________________________ Time: 07:30:34 PM PST US From: N223RV@aol.com Subject: Re: RV-List: Trutrack alt hold --> RV-List message posted by: N223RV@aol.com I couldn't agree with you more. I have the same set up and have had no issues for about100 hours. In fact, if I could only purchase one for the RV, I'd pick the altitude hold over the wings leveler! -Mike Kraus N223RV RV-4 Flying N213RV RV-10 Empennage complete, working on Tailcone ________________________________ Message 20 ____________________________________ Time: 08:34:40 PM PST US From: "Tim Bryan" Subject: RV-List: Aircraft Performance numbers -NOT RV BUILDER RELATED --> RV-List message posted by: "Tim Bryan" Listers, I have been trying to find an aircraft search based on performance unsuccessfully. Does anybody know of a site where one could find say all comparable aircraft? 200 MPH cruise + or - 4 place single engine etc. Just wondering from what pool of aircraft have comparable performance figures. Thanks for any help. Tim Bryan RV-6 N616TB Do Not Archive this. ________________________________ Message 21 ____________________________________ Time: 08:34:40 PM PST US From: Skylor Piper Subject: Re: RV-List: Fuel Valve --> RV-List message posted by: Skylor Piper So to add to all of the different responses... On my RV-8 drawings for the fuel injected plumbing routing, Van's shows a return line running from the Airflow Performance boost bump back to a tee that is mounted on the fuel valve outlet port. This way, the return doesn't have to be run all the way back to the tank and you don't need the expensive valve. Skylor RV-8 QB Under Construction N808SJ Reserved --- "Stan J. Jones" wrote: > --> RV-List message posted by: "Stan J. Jones" > > > I am not at all familiar with injected motors. Is > there a fuel return line > from the motor on an IO 360, and do I need to order > one of those fancy fuel > valves that Vans sells, ($350), in order to return > surplus fuel to the tank, > and do I need to plumb up two new fuel lines for > that purpose. > Stan Jones. N.Z. > > > > Contributions > any other > Forums. > > http://www.matronics.com/chat > > http://www.matronics.com/subscription > http://www.matronics.com/FAQ/RV-List.htm > http://www.matronics.com/archives > http://www.matronics.com/photoshare > http://www.matronics.com/emaillists > > > > > > __________________________________ http://promotions.yahoo.com/new_mail ________________________________ Message 22 ____________________________________ Time: 08:48:05 PM PST US From: "Stein Bruch" Subject: RE: RV-List: Re:Fuel Valve --> RV-List message posted by: "Stein Bruch" Hi Bob, What fuel injection system are you using?? Neither the Bendix RSA nor the Airflow Performance system mandates the use of a fuel return line. The only case I'm aware of needing a return line is if using a "purge valve", which in itself is also not a necessity on either system. There are a lot of both Bendix & AFP systems flying without a return type line, nor a purge valve. That being said, if one plans to use a purge valve, then of course some sort of return line would be necessary. Cheers, Stein Bruch RV6's, Minneapolis -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com]On Behalf Of Oldsfolks@aol.com Subject: RV-List: Re:Fuel Valve --> RV-List message posted by: Oldsfolks@aol.com You will need a fuel return line to your fuel tank. Mine runs to the left tank. This means that I MUST use fuel from the left tank first. If I fail to select the left tank, when both are full, I will soon overflow the left tank and fuel will be discharged through the left vent line. I'm not familiar with the expensive valve from Vans but it probably just shifts the return line to flow into the same tank you are drawing from. Hope this helps, Bob Olds RV-4 , N1191X A&P , EAA Tech. Counselor Charleston,Arkansas Real Aviators Fly Taildraggers ________________________________ Message 23 ____________________________________ Time: 09:14:49 PM PST US From: "Eustace Bowhay" Subject: Re: RV-List: Care of plexiglass --> RV-List message posted by: "Eustace Bowhay" Hi Jerry: Yes it is Meguiars, they have three products #10-17and18. The one I use is #10. However # 17 would probably be better if there are any scratches. Eustace ----- Original Message ----- From: "Jerry Calvert" Subject: Re: RV-List: Care of plexiglass > --> RV-List message posted by: "Jerry Calvert" > > Is this the Meguiars Mirror Glaze or another brand? > > Jerry Calvert > Edmond Ok > RV6 N296JC > ----- Original Message ----- > From: "Eustace Bowhay" > To: "rv list" > Subject: RV-List: Care of plexiglass > > > > --> RV-List message posted by: "Eustace Bowhay" > > > > What has worked best for me over the years is the following. > > > > Use only flannel cloth ( ripped old bed sheet into sixteen inch squares) > then store them in a plastic bag. > > > > If wind screen (canopy) is dusty (stored for awhile) rinse off with water > without touching the plexi by (spraying or pouring water over it. Then with > a piece of clean flannel soaked in slightly soapy water and partially wrung > out, take it by two corners and drag it full width over the plexi without > any pressure on it, turn it over and do it a second time then put the > flannel in a plastic bag to washing. > > > > If there are bugs take another clean cloth soaked in the soapy water > gently clean them off. Put this cloth in the bag for washing. > > > > I have used Mirror Glaze for around forty years and would use nothing > else, recently a friend asked me to try some Plexus and found it to be a > good product. Again taking another clean cloth spray on the cleaner and wipe > dry, another cloth for the laundry bag. > > > > This may sound a bit like over- kill but it is the only way I could be > sure of not winding up with some scratches. > > > > I have flown many aircraft that had scratched plexi and found that by > using Mirror Glaze all but the worst scratches would eventually disappear. > > > > If the canopy is new and scratch free the Plexus will sure do the job and > is quicker to use. > > > > Anyway the whole idea is prevent getting any scratches in the first place > and the only way I have been able to do that is not rub with any gritty > stuff on the plexi. > > > > Eustace Bowhay Blind Bay, B.C. > > > > Eustace Bowhay > > > > > > ________________________________ Message 24 ____________________________________ Time: 09:23:59 PM PST US From: "Karie Daniel" Subject: Re: RV-List: Care of plexiglass --> RV-List message posted by: "Karie Daniel" Although it hasn't been mentioned yet, I learned that to avoid creating scratches that you never, ever, ever wipe or clean plexiglass in a circular motion. Always wipe up and down. I see guys going to town with whatever cleaner as if they were "waxing" the canopy. This is the fastest way to scratch it up. Maybe an old wives tale but that's what the pros say! Karie ----- Original Message ----- From: "Eustace Bowhay" Subject: Re: RV-List: Care of plexiglass > --> RV-List message posted by: "Eustace Bowhay" > > Hi Jerry: > > Yes it is Meguiars, they have three products #10-17and18. The one I use is > #10. However # 17 would probably be better if there are any scratches. > > Eustace > > ----- Original Message ----- > From: "Jerry Calvert" > To: > Subject: Re: RV-List: Care of plexiglass > > > > --> RV-List message posted by: "Jerry Calvert" > > > > Is this the Meguiars Mirror Glaze or another brand? > > > > Jerry Calvert > > Edmond Ok > > RV6 N296JC > > ----- Original Message ----- > > From: "Eustace Bowhay" > > To: "rv list" > > Subject: RV-List: Care of plexiglass > > > > > > > --> RV-List message posted by: "Eustace Bowhay" > > > > > > What has worked best for me over the years is the following. > > > > > > Use only flannel cloth ( ripped old bed sheet into sixteen inch squares) > > then store them in a plastic bag. > > > > > > If wind screen (canopy) is dusty (stored for awhile) rinse off with > water > > without touching the plexi by (spraying or pouring water over it. Then > with > > a piece of clean flannel soaked in slightly soapy water and partially > wrung > > out, take it by two corners and drag it full width over the plexi without > > any pressure on it, turn it over and do it a second time then put the > > flannel in a plastic bag to washing. > > > > > > If there are bugs take another clean cloth soaked in the soapy water > > gently clean them off. Put this cloth in the bag for washing. > > > > > > I have used Mirror Glaze for around forty years and would use nothing > > else, recently a friend asked me to try some Plexus and found it to be a > > good product. Again taking another clean cloth spray on the cleaner and > wipe > > dry, another cloth for the laundry bag. > > > > > > This may sound a bit like over- kill but it is the only way I could be > > sure of not winding up with some scratches. > > > > > > I have flown many aircraft that had scratched plexi and found that by > > using Mirror Glaze all but the worst scratches would eventually disappear. > > > > > > If the canopy is new and scratch free the Plexus will sure do the job > and > > is quicker to use. > > > > > > Anyway the whole idea is prevent getting any scratches in the first > place > > and the only way I have been able to do that is not rub with any gritty > > stuff on the plexi. > > > > > > Eustace Bowhay Blind Bay, B.C. > > > > > > Eustace Bowhay > > > > > > > > > > > > ________________________________ Message 25 ____________________________________ Time: 09:44:18 PM PST US From: "Brian Kraut" Subject: RE: RV-List: Aircraft Performance numbers -NOT RV BUILDER RELATED --> RV-List message posted by: "Brian Kraut" If you are just looking at homebuilts you can use the Aerocrafter CD. For factory planes I don't know. Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com]On Behalf Of Tim Bryan Subject: RV-List: Aircraft Performance numbers -NOT RV BUILDER RELATED --> RV-List message posted by: "Tim Bryan" Listers, I have been trying to find an aircraft search based on performance unsuccessfully. Does anybody know of a site where one could find say all comparable aircraft? 200 MPH cruise + or - 4 place single engine etc. Just wondering from what pool of aircraft have comparable performance figures. Thanks for any help. Tim Bryan RV-6 N616TB Do Not Archive this.