Today's Message Index:
----------------------
1. 05:24 AM - Hanger space needed (Charles Heathco)
2. 06:14 AM - Re: Hanger space needed (Mickey Coggins)
3. 06:18 AM - Re: Hanging Plans (George Neal E Capt AU/XPRR)
4. 06:25 AM - Hanger needed (Charles Heathco)
5. 06:32 AM - Lycoming Gray Paint Code (Tom & Cathy Ervin)
6. 07:04 AM - hanging plans (Frazier, Vincent A)
7. 07:52 AM - new Aeroelectric Connection (Aircraft Technical Book Company)
8. 12:19 PM - Re: New Rattle Can Primer ?? Dupont 4115s Just FYI (Hull, Don)
9. 12:50 PM - Re: New Rattle Can Primer ?? Dupont 4115s Just FYI (Hull, Don)
10. 04:38 PM - Re: Hanging Plans (Paul Besing)
11. 05:08 PM - Re: New Rattle Can Primer ?? Dupont 4115s Just FYI (Bill Schlatterer)
12. 06:03 PM - Re: Hanging Plans (Brad Oliver)
13. 07:08 PM - Re: Lycoming Gray Paint Code (LARRY ADAMSON)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Hanger space needed |
--> RV-List message posted by: "Charles Heathco" <cheathco@comcast.net>
I will be moving Tweetybird (6a) to the san anton/austin area next week, I have
a couple leads, anyone else know of something availible, small induvidual, or
to share. Charlie heathco
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Hanger space needed |
--> RV-List message posted by: Mickey Coggins <mick-matronics@rv8.ch>
> I will be moving Tweetybird (6a) to the san anton/austin area next
> week, I have a couple leads, anyone else know of something availible,
> small induvidual, or to share. Charlie heathco
Have a look out in Lockhart - there's quite a community of RVs
there, and it's not real far from either Austin or San Antonails.
Houses are pretty cheap in Lockhart, too.
--
Mickey Coggins
http://www.rv8.ch/
#82007 Wiring
do not archive
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: George Neal E Capt AU/XPRR <Neal.George@MAXWELL.AF.MIL>
Brad -
Look here:
http://www.appaero.com/Pictures/Emp%20Pics/Rudder%20Pics/RudderSkinClecoed.J
PG
and here:
http://www.appaero.com/Pictures/Emp%20Pics/EmpFiberglass%20Pics/FileHSSkin.J
PG
I used some of the empennage packing to make a really big clipboard.
Spring-clamps would work just as well as the chart hanger to secure the
prints to the board. A strip of cardboard taped to the top protects the
prints distributes the pinch forces. The foot on the bottom helps to keep
it from sliding around when I want it on the bench instead of hanging on the
wall.
Do not archive.
Neal
>
I seem to remember seeing (on someone's web site) a cool way to hang the
plans that allowed the builder to flip pages easily, but I can't find it
again. Anybody know what I am talking about, or have another good way to
hang them (on wall)?
Thanks,
Brad
RV-7 Emp Kit Arrived Today - Waiting on Tools
<
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Charles Heathco" <cheathco@comcast.net>
I ment to add re hanger needed, to reply to my email direct, and do not archive.
charlie
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Lycoming Gray Paint Code |
--> RV-List message posted by: "Tom & Cathy Ervin" <tcervin@valkyrie.net>
List, Anyone have the Lycoming Engine Gray paint code handy? PPG or Dupont would
be just fine.
Thanks
in advance, Tom in Ohio
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Frazier, Vincent A" <VFrazier@usi.edu>
SNIP seem to remember seeing (on someone's web site) a cool way to hang
the
plans that allowed the builder to flip pages easily, but I can't find it
again. Anybody know what I am talking about, or have another good way
to
hang them (on wall)? SNIP
I have my plans on an old piece of junk that, after I cobbled it
together, looks like a small drafting table. Basically, I used an old
wheel rim, a piece of pipe and a 3' x 4' scrap of plywood to build it.
The bottom edge of the table has a lip to keep stuff from rolling off.
The plans are held to the top edge of the plywood with a few large
binder clips that you can get from Office Depot. It works very well.
http://www.usi.edu/science/chemistry/vfrazier/2003-09-17/rudder%20socket
%20filling.jpg the plans table is on the left side of the photo.
(Paste the link back together if it wraps onto two lines in your email
program. It is a GOOD link.)
Vince
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | new Aeroelectric Connection |
--> RV-List message posted by: "Aircraft Technical Book Company" <winterland@rkymtnhi.com>
The new of AEROELECTRIC CONNECTION (revision 11) is now in stock. This is
the best manual available on how to design and install the electrical system
in your RV. Ask anybody who has ever built an RV. Bob Nuckoll's manual is
the bible.
http://www.buildersbooks.com/electrical_systems1.htm
Thanks,
Andy
Builder's Bookstore
www.buildersbooks.com
800 780-4115
do not archive
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | New Rattle Can Primer ?? Dupont 4115s Just FYI |
--> RV-List message posted by: "Hull, Don" <Donald.C.Hull@nasa.gov>
Bill, what color is the primer when after it dries?
Don Hull
RV-7 emp
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer
Subject: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI
--> RV-List message posted by: "Bill Schlatterer"
--> <billschlatterer@sbcglobal.net>
Not to start this up but thought it might interest some to see the spec
sheet on a new rattle can self-etching primer by Dupont. It is supposedly
non-corrosive AND does have some corrosion inhibiting qualities. I tried
some this week and it works pretty well.
Shot some small parts, air dried about 15 minutes followed by Dupont Immron.
Came out slick! YMMV
See spec sheet link.
http://www.performancecoatings.dupont.com/dpc/en/us/html/prodinfo/chromasyst
em/H-19469_A-4115S.pdf
Bill S
7a Ark
fuse/panel
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | New Rattle Can Primer ?? Dupont 4115s Just FYI |
--> RV-List message posted by: "Hull, Don" <Donald.C.Hull@nasa.gov>
Bill, what color is the primer after it dries?
Don Hull
RV-7 emp
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Hull, Don
Subject: RE: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI
--> RV-List message posted by: "Hull, Don" <Donald.C.Hull@nasa.gov>
Bill, what color is the primer when after it dries?
Don Hull
RV-7 emp
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer
Subject: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI
--> RV-List message posted by: "Bill Schlatterer"
--> <billschlatterer@sbcglobal.net>
Not to start this up but thought it might interest some to see the spec
sheet on a new rattle can self-etching primer by Dupont. It is supposedly
non-corrosive AND does have some corrosion inhibiting qualities. I tried
some this week and it works pretty well.
Shot some small parts, air dried about 15 minutes followed by Dupont Immron.
Came out slick! YMMV
See spec sheet link.
http://www.performancecoatings.dupont.com/dpc/en/us/html/prodinfo/chromasyst
em/H-19469_A-4115S.pdf
Bill S
7a Ark
fuse/panel
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Paul Besing" <paul@kitlog.com>
Try this one. If I were to do it again, I'd make the zip ties (or whatever
you used to hang it with) longer to facilitate easy turning of the pages.)
http://www.lacodeworks.com/besing/shop/theshop.htm
Paul Besing
RV-6A Sold
Kitlog Builder's Software
www.kitlog.com
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com]On Behalf Of Brad Oliver
Subject: RV-List: Hanging Plans
--> RV-List message posted by: "Brad Oliver" <brad@rv7factory.com>
I seem to remember seeing (on someone's web site) a cool way to hang the
plans that allowed the builder to flip pages easily, but I can't find it
again. Anybody know what I am talking about, or have another good way to
hang them (on wall)?
Thanks,
Brad
RV-7 Emp Kit Arrived Today - Waiting on Tools
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | New Rattle Can Primer ?? Dupont 4115s Just FYI |
--> RV-List message posted by: "Bill Schlatterer" <billschlatterer@sbcglobal.net>
It's sort of a dark brownish green if that means anything. Let me know if
you want a picture.
Bill S
7a Ark
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com]On Behalf Of Hull, Don
Subject: RE: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI
--> RV-List message posted by: "Hull, Don" <Donald.C.Hull@nasa.gov>
Bill, what color is the primer when after it dries?
Don Hull
RV-7 emp
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer
Subject: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI
--> RV-List message posted by: "Bill Schlatterer"
--> <billschlatterer@sbcglobal.net>
Not to start this up but thought it might interest some to see the spec
sheet on a new rattle can self-etching primer by Dupont. It is supposedly
non-corrosive AND does have some corrosion inhibiting qualities. I tried
some this week and it works pretty well.
Shot some small parts, air dried about 15 minutes followed by Dupont Immron.
Came out slick! YMMV
See spec sheet link.
http://www.performancecoatings.dupont.com/dpc/en/us/html/prodinfo/chromasyst
em/H-19469_A-4115S.pdf
Bill S
7a Ark
fuse/panel
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Brad Oliver" <brad@rv7factory.com>
Paul,
Yes, that's the one I was thinking of! Thanks!
~Brad
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com]On Behalf Of Paul Besing
Subject: RE: RV-List: Hanging Plans
--> RV-List message posted by: "Paul Besing" <paul@kitlog.com>
Try this one. If I were to do it again, I'd make the zip ties (or whatever
you used to hang it with) longer to facilitate easy turning of the pages.)
http://www.lacodeworks.com/besing/shop/theshop.htm
Paul Besing
RV-6A Sold
Kitlog Builder's Software
www.kitlog.com
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com]On Behalf Of Brad Oliver
Subject: RV-List: Hanging Plans
--> RV-List message posted by: "Brad Oliver" <brad@rv7factory.com>
I seem to remember seeing (on someone's web site) a cool way to hang the
plans that allowed the builder to flip pages easily, but I can't find it
again. Anybody know what I am talking about, or have another good way to
hang them (on wall)?
Thanks,
Brad
RV-7 Emp Kit Arrived Today - Waiting on Tools
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Lycoming Gray Paint Code |
--> RV-List message posted by: "LARRY ADAMSON" <rvhi03@msn.com>
----- Original Message -----
From: Tom & Cathy Ervin
Subject: RV-List: Lycoming Gray Paint Code
I have a can of Tempo Aviation Aircraft Engine Enamel. Has the number# A-219
Lycoming Gray
If that helps at all?
>List, Anyone have the Lycoming Engine Gray paint code handy? PPG or Dupont would
be just fine.
Thanks
in advance, Tom in Ohio
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|