---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Fri 05/20/05: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:24 AM - Hanger space needed (Charles Heathco) 2. 06:14 AM - Re: Hanger space needed (Mickey Coggins) 3. 06:18 AM - Re: Hanging Plans (George Neal E Capt AU/XPRR) 4. 06:25 AM - Hanger needed (Charles Heathco) 5. 06:32 AM - Lycoming Gray Paint Code (Tom & Cathy Ervin) 6. 07:04 AM - hanging plans (Frazier, Vincent A) 7. 07:52 AM - new Aeroelectric Connection (Aircraft Technical Book Company) 8. 12:19 PM - Re: New Rattle Can Primer ?? Dupont 4115s Just FYI (Hull, Don) 9. 12:50 PM - Re: New Rattle Can Primer ?? Dupont 4115s Just FYI (Hull, Don) 10. 04:38 PM - Re: Hanging Plans (Paul Besing) 11. 05:08 PM - Re: New Rattle Can Primer ?? Dupont 4115s Just FYI (Bill Schlatterer) 12. 06:03 PM - Re: Hanging Plans (Brad Oliver) 13. 07:08 PM - Re: Lycoming Gray Paint Code (LARRY ADAMSON) ________________________________ Message 1 _____________________________________ Time: 05:24:53 AM PST US From: "Charles Heathco" Subject: RV-List: Hanger space needed --> RV-List message posted by: "Charles Heathco" I will be moving Tweetybird (6a) to the san anton/austin area next week, I have a couple leads, anyone else know of something availible, small induvidual, or to share. Charlie heathco ________________________________ Message 2 _____________________________________ Time: 06:14:48 AM PST US From: Mickey Coggins Subject: Re: RV-List: Hanger space needed --> RV-List message posted by: Mickey Coggins > I will be moving Tweetybird (6a) to the san anton/austin area next > week, I have a couple leads, anyone else know of something availible, > small induvidual, or to share. Charlie heathco Have a look out in Lockhart - there's quite a community of RVs there, and it's not real far from either Austin or San Antonails. Houses are pretty cheap in Lockhart, too. -- Mickey Coggins http://www.rv8.ch/ #82007 Wiring do not archive ________________________________ Message 3 _____________________________________ Time: 06:18:45 AM PST US From: George Neal E Capt AU/XPRR Subject: RE: RV-List: Hanging Plans --> RV-List message posted by: George Neal E Capt AU/XPRR Brad - Look here: http://www.appaero.com/Pictures/Emp%20Pics/Rudder%20Pics/RudderSkinClecoed.J PG and here: http://www.appaero.com/Pictures/Emp%20Pics/EmpFiberglass%20Pics/FileHSSkin.J PG I used some of the empennage packing to make a really big clipboard. Spring-clamps would work just as well as the chart hanger to secure the prints to the board. A strip of cardboard taped to the top protects the prints distributes the pinch forces. The foot on the bottom helps to keep it from sliding around when I want it on the bench instead of hanging on the wall. Do not archive. Neal > I seem to remember seeing (on someone's web site) a cool way to hang the plans that allowed the builder to flip pages easily, but I can't find it again. Anybody know what I am talking about, or have another good way to hang them (on wall)? Thanks, Brad RV-7 Emp Kit Arrived Today - Waiting on Tools < ________________________________ Message 4 _____________________________________ Time: 06:25:12 AM PST US From: "Charles Heathco" Subject: RV-List: Hanger needed --> RV-List message posted by: "Charles Heathco" I ment to add re hanger needed, to reply to my email direct, and do not archive. charlie ________________________________ Message 5 _____________________________________ Time: 06:32:43 AM PST US From: "Tom & Cathy Ervin" Subject: RV-List: Lycoming Gray Paint Code --> RV-List message posted by: "Tom & Cathy Ervin" List, Anyone have the Lycoming Engine Gray paint code handy? PPG or Dupont would be just fine. Thanks in advance, Tom in Ohio ________________________________ Message 6 _____________________________________ Time: 07:04:47 AM PST US Subject: RV-List: hanging plans From: "Frazier, Vincent A" --> RV-List message posted by: "Frazier, Vincent A" SNIP seem to remember seeing (on someone's web site) a cool way to hang the plans that allowed the builder to flip pages easily, but I can't find it again. Anybody know what I am talking about, or have another good way to hang them (on wall)? SNIP I have my plans on an old piece of junk that, after I cobbled it together, looks like a small drafting table. Basically, I used an old wheel rim, a piece of pipe and a 3' x 4' scrap of plywood to build it. The bottom edge of the table has a lip to keep stuff from rolling off. The plans are held to the top edge of the plywood with a few large binder clips that you can get from Office Depot. It works very well. http://www.usi.edu/science/chemistry/vfrazier/2003-09-17/rudder%20socket %20filling.jpg the plans table is on the left side of the photo. (Paste the link back together if it wraps onto two lines in your email program. It is a GOOD link.) Vince ________________________________ Message 7 _____________________________________ Time: 07:52:56 AM PST US From: "Aircraft Technical Book Company" Subject: RV-List: new Aeroelectric Connection --> RV-List message posted by: "Aircraft Technical Book Company" The new of AEROELECTRIC CONNECTION (revision 11) is now in stock. This is the best manual available on how to design and install the electrical system in your RV. Ask anybody who has ever built an RV. Bob Nuckoll's manual is the bible. http://www.buildersbooks.com/electrical_systems1.htm Thanks, Andy Builder's Bookstore www.buildersbooks.com 800 780-4115 do not archive ________________________________ Message 8 _____________________________________ Time: 12:19:52 PM PST US From: "Hull, Don" Subject: RE: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Hull, Don" Bill, what color is the primer when after it dries? Don Hull RV-7 emp -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer Subject: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Bill Schlatterer" --> Not to start this up but thought it might interest some to see the spec sheet on a new rattle can self-etching primer by Dupont. It is supposedly non-corrosive AND does have some corrosion inhibiting qualities. I tried some this week and it works pretty well. Shot some small parts, air dried about 15 minutes followed by Dupont Immron. Came out slick! YMMV See spec sheet link. http://www.performancecoatings.dupont.com/dpc/en/us/html/prodinfo/chromasyst em/H-19469_A-4115S.pdf Bill S 7a Ark fuse/panel ________________________________ Message 9 _____________________________________ Time: 12:50:08 PM PST US From: "Hull, Don" Subject: RE: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Hull, Don" Bill, what color is the primer after it dries? Don Hull RV-7 emp -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Hull, Don Subject: RE: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Hull, Don" Bill, what color is the primer when after it dries? Don Hull RV-7 emp -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer Subject: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Bill Schlatterer" --> Not to start this up but thought it might interest some to see the spec sheet on a new rattle can self-etching primer by Dupont. It is supposedly non-corrosive AND does have some corrosion inhibiting qualities. I tried some this week and it works pretty well. Shot some small parts, air dried about 15 minutes followed by Dupont Immron. Came out slick! YMMV See spec sheet link. http://www.performancecoatings.dupont.com/dpc/en/us/html/prodinfo/chromasyst em/H-19469_A-4115S.pdf Bill S 7a Ark fuse/panel ________________________________ Message 10 ____________________________________ Time: 04:38:22 PM PST US From: "Paul Besing" Subject: RE: RV-List: Hanging Plans --> RV-List message posted by: "Paul Besing" Try this one. If I were to do it again, I'd make the zip ties (or whatever you used to hang it with) longer to facilitate easy turning of the pages.) http://www.lacodeworks.com/besing/shop/theshop.htm Paul Besing RV-6A Sold Kitlog Builder's Software www.kitlog.com -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com]On Behalf Of Brad Oliver Subject: RV-List: Hanging Plans --> RV-List message posted by: "Brad Oliver" I seem to remember seeing (on someone's web site) a cool way to hang the plans that allowed the builder to flip pages easily, but I can't find it again. Anybody know what I am talking about, or have another good way to hang them (on wall)? Thanks, Brad RV-7 Emp Kit Arrived Today - Waiting on Tools ________________________________ Message 11 ____________________________________ Time: 05:08:25 PM PST US From: "Bill Schlatterer" Subject: RE: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Bill Schlatterer" It's sort of a dark brownish green if that means anything. Let me know if you want a picture. Bill S 7a Ark -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com]On Behalf Of Hull, Don Subject: RE: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Hull, Don" Bill, what color is the primer when after it dries? Don Hull RV-7 emp -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer Subject: RV-List: New Rattle Can Primer ?? Dupont 4115s Just FYI --> RV-List message posted by: "Bill Schlatterer" --> Not to start this up but thought it might interest some to see the spec sheet on a new rattle can self-etching primer by Dupont. It is supposedly non-corrosive AND does have some corrosion inhibiting qualities. I tried some this week and it works pretty well. Shot some small parts, air dried about 15 minutes followed by Dupont Immron. Came out slick! YMMV See spec sheet link. http://www.performancecoatings.dupont.com/dpc/en/us/html/prodinfo/chromasyst em/H-19469_A-4115S.pdf Bill S 7a Ark fuse/panel ________________________________ Message 12 ____________________________________ Time: 06:03:55 PM PST US From: "Brad Oliver" Subject: RE: RV-List: Hanging Plans --> RV-List message posted by: "Brad Oliver" Paul, Yes, that's the one I was thinking of! Thanks! ~Brad -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com]On Behalf Of Paul Besing Subject: RE: RV-List: Hanging Plans --> RV-List message posted by: "Paul Besing" Try this one. If I were to do it again, I'd make the zip ties (or whatever you used to hang it with) longer to facilitate easy turning of the pages.) http://www.lacodeworks.com/besing/shop/theshop.htm Paul Besing RV-6A Sold Kitlog Builder's Software www.kitlog.com -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com]On Behalf Of Brad Oliver Subject: RV-List: Hanging Plans --> RV-List message posted by: "Brad Oliver" I seem to remember seeing (on someone's web site) a cool way to hang the plans that allowed the builder to flip pages easily, but I can't find it again. Anybody know what I am talking about, or have another good way to hang them (on wall)? Thanks, Brad RV-7 Emp Kit Arrived Today - Waiting on Tools ________________________________ Message 13 ____________________________________ Time: 07:08:55 PM PST US From: "LARRY ADAMSON" Subject: Re: RV-List: Lycoming Gray Paint Code --> RV-List message posted by: "LARRY ADAMSON" ----- Original Message ----- From: Tom & Cathy Ervin Subject: RV-List: Lycoming Gray Paint Code I have a can of Tempo Aviation Aircraft Engine Enamel. Has the number# A-219 Lycoming Gray If that helps at all? >List, Anyone have the Lycoming Engine Gray paint code handy? PPG or Dupont would be just fine. Thanks in advance, Tom in Ohio