Today's Message Index:
----------------------
1. 04:27 AM - Re: Houston Hurricane Evacuees (planes) (Stewart, Michael (ISS Atlanta))
2. 05:18 AM - Re: Compass Correction Card spreadsheet (linn walters)
3. 05:31 AM - Re: Compass Correction Card spreadsheet (linn walters)
4. 05:40 AM - Re: RvAtor Receipt? (Marty)
5. 05:46 AM - Re: Houston Hurricane Evacuees (planes) (Marty)
6. 06:45 AM - Re: RvAtor Receipt? (Frank Stringham)
7. 06:45 AM - Re: LASAR and CHT Probe (John Huft)
8. 07:07 AM - Instruments for sale (mkejrj@comcast.net)
9. 07:26 AM - Re: RV stuff for sale... (Paul Rice)
10. 07:29 AM - Re: RvAtor Receipt? (Bob Collins)
11. 07:39 AM - Rubber "h-channel" - wing root channel (Mickey Coggins)
12. 08:06 AM - Fly-in in Western North Carolina Saturday the 24th (Wesley Robinson Stanford)
13. 08:35 AM - sun-glasses (bertrv6@highstream.net)
14. 09:19 AM - Re: LASAR and CHT Probe (Walter Tondu)
15. 09:27 AM - Re: Anywhere map? (Jeff Dowling)
16. 09:44 AM - Re: Compass Correction Card spreadsheet (John Furey)
17. 09:57 AM - Re: Compass Correction Card spreadsheet (linn walters)
18. 12:39 PM - Re: RvAtor Receipt? (Marty)
19. 02:13 PM - Re: Houston Hurricane Evacuees (planes) (Charlie England)
20. 02:13 PM - Hurricane (Brett Hahn)
21. 02:16 PM - Re: RvAtor Receipt? (Frank Stringham)
22. 03:19 PM - CFI in Northern California (Travis Hamblen)
23. 04:33 PM - Re: RvAtor Receipt? (Speed 3 Guy)
24. 05:10 PM - Re: RvAtor Receipt? (Bobby Hester)
25. 05:17 PM - Re: RvAtor Receipt? (Jerry Springer)
26. 05:26 PM - Re: Rubber "h-channel" - wing root channel (Rquinn1@aol.com)
27. 05:33 PM - Re: sun-glasses (Rick McCraw)
28. 11:54 PM - Re: CFI in Northern California (Vanremog@aol.com)
29. 11:54 PM - Re: Rubber "h-channel" - wing root channel (Mickey Coggins)
30. 11:54 PM - Re: Rubber "h-channel" - wing root channel (Vanremog@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Houston Hurricane Evacuees (planes) |
--> RV-List message posted by: "Stewart, Michael (ISS Atlanta)" <mstewart@iss.net>
Try here:
http://www.vansairforce.com/community/showthread.php?t=3340
Mike
Do not archive since for some reason the question is.
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Bryan Jones
Subject: RV-List: Houston Hurricane Evacuees (planes)
--> RV-List message posted by: "Bryan Jones" <rv_8pilot@hotmail.com>
Anyone have any recommended locations for secure storage of an RV near
Dallas Love Field? Anything at Love itself, possibly? Would prefer a
hangar, but secure is the main concern. Myself and some local buddies
might
decide to evac 3-4 planes tomorrow or thursday.
Would want to fly SWA back to HOU as soon as the planes were relocated,
then
pick back up a few days later.
Thanks in advance.
Bryan Jones
Houston
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Compass Correction Card spreadsheet |
--> RV-List message posted by: linn walters <lwalters2@cfl.rr.com>
I just scanned one ...... it's attached. Open in any paint program and
put the numbers where you want them. I hope the spreadsheet one shows
up. Sounds a little more elegant!
Linn
Albert Gardner wrote:
>--> RV-List message posted by: "Albert Gardner" <ibspud@adelphia.net>
>
>Well, an archive search didn't turn up any hits but I thought I remembered a
>posting about a spreadsheet program that would print a correction card.
>Anyone familiar with this?
>Albert Gardner
>Yuma, AZ
>
>
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Compass Correction Card spreadsheet |
--> RV-List message posted by: linn walters <lwalters2@cfl.rr.com>
I thought the Matronics list allowed attachments, but it didn't come
through. So I sent it direct to Albert. Sorry for the waste of
bandwidth and archive space!
Linn
do not archive
linn walters wrote:
>--> RV-List message posted by: linn walters <lwalters2@cfl.rr.com>
>
>I just scanned one ...... it's attached. Open in any paint program and
>put the numbers where you want them. I hope the spreadsheet one shows
>up. Sounds a little more elegant!
>Linn
>
>Albert Gardner wrote:
>
>
>
>>--> RV-List message posted by: "Albert Gardner" <ibspud@adelphia.net>
>>
>>Well, an archive search didn't turn up any hits but I thought I remembered a
>>posting about a spreadsheet program that would print a correction card.
>>Anyone familiar with this?
>>Albert Gardner
>>Yuma, AZ
>>
>>
>>
>>
>>
>>
>
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Marty" <martorious@earthlink.net>
Still waiting in Indiana...
Marty in Indiana
RV-8A Preview plans in Hand
do not archive
>-----Original Message-----
>From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-
>server@matronics.com] On Behalf Of Bob Perkinson
>Sent: Tuesday, September 20, 2005 8:37 PM
>To: rv-list@matronics.com
>Subject: RE: RV-List: RvAtor Receipt?
>
>--> RV-List message posted by: "Bob Perkinson"
><bobperk@bellsouth.net>
>
>Still waiting for my copy in Tennessee.
>
>Bob Perkinson
>Hendersonville, TN.
>RV9 N658RP Reserved
>If nothing changes
>Nothing changes
>
>
> Do Not Archive
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Houston Hurricane Evacuees (planes) |
--> RV-List message posted by: "Marty" <martorious@earthlink.net>
Or try this.
http://www.vansairforce.net/Inland_Base_List.htm
Marty in Indiana
RV-8A Preview plans in Hand
do not archive
>-----Original Message-----
>From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-
>server@matronics.com] On Behalf Of Stewart, Michael (ISS Atlanta)
>Sent: Wednesday, September 21, 2005 6:25 AM
>To: rv-list@matronics.com
>Subject: RE: RV-List: Houston Hurricane Evacuees (planes)
>
>--> RV-List message posted by: "Stewart, Michael (ISS Atlanta)"
><mstewart@iss.net>
>
>Try here:
>http://www.vansairforce.com/community/showthread.php?t=3340
>
>Mike
>Do not archive since for some reason the question is.
>
>
>-----Original Message-----
>From: owner-rv-list-server@matronics.com
>[mailto:owner-rv-list-server@matronics.com] On Behalf Of Bryan Jones
>To: rv-list@matronics.com
>Subject: RV-List: Houston Hurricane Evacuees (planes)
>
>--> RV-List message posted by: "Bryan Jones" <rv_8pilot@hotmail.com>
>
>Anyone have any recommended locations for secure storage of an RV
>near
>Dallas Love Field? Anything at Love itself, possibly? Would prefer
>a
>hangar, but secure is the main concern. Myself and some local
>buddies
>might
>decide to evac 3-4 planes tomorrow or thursday.
>
>Would want to fly SWA back to HOU as soon as the planes were
>relocated,
>then
>pick back up a few days later.
>
>Thanks in advance.
>
>Bryan Jones
>Houston
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Frank Stringham" <fstringham@hotmail.com>
got mine yesterday
Frank in SW Utah ..... SGU
>From: "Marty" <martorious@earthlink.net>
>Reply-To: rv-list@matronics.com
>To: <rv-list@matronics.com>
>Subject: RE: RV-List: RvAtor Receipt?
>Date: Wed, 21 Sep 2005 07:39:11 -0500
>
>--> RV-List message posted by: "Marty" <martorious@earthlink.net>
>
>Still waiting in Indiana...
>
>Marty in Indiana
>RV-8A Preview plans in Hand
>do not archive
> >-----Original Message-----
> >From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-
> >server@matronics.com] On Behalf Of Bob Perkinson
> >Sent: Tuesday, September 20, 2005 8:37 PM
> >To: rv-list@matronics.com
> >Subject: RE: RV-List: RvAtor Receipt?
> >
> >--> RV-List message posted by: "Bob Perkinson"
> ><bobperk@bellsouth.net>
> >
> >Still waiting for my copy in Tennessee.
> >
> >Bob Perkinson
> >Hendersonville, TN.
> >RV9 N658RP Reserved
> >If nothing changes
> >Nothing changes
> >
> >
> > Do Not Archive
> >
> >
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: LASAR and CHT Probe |
--> RV-List message posted by: John Huft <rv8@lazy8.net>
Jim
You will find a write up about the CHT probe on Randy Lervold's
website www.rv-8.com
I also had the LASAR system on my RV-8, with the probe. As I understand
things, if you want to disable it as Randy suggests, you could just tie
it on to something under the panel. Since it would never get hot, it
wouldn't do anything.
However, it is my opinion that it is a good thing. I talked to Harry
Fenton about it (back in the good-old-days when Harry was still there).
He told me that it begins to roll back the timing advance when the TIT
goes above 435 degrees F. That sounds like a good thing to me. The
timing advance does produce higher CHTs, and you don't want to damage
your engine. This function may well give you a limit of 435 until you
really force a climb on a hot day.
My further opinion is that LASAR sucks, which is another area that Randy
and I disagree. I hope to meet him one day and have a talk over a couple
of beers :o) < Randy, how about LOE next month?>
http://lazy8.net/EI.htm
John Huft
RV8 "Nuisance"
Jim Gray wrote:
>--> RV-List message posted by: Jim Gray <n747jg@earthlink.net>
>
>I'm just beginning installation of LASAR electronic ignition on my RV-8
>and noticed it came with a cylinder head temperature probe, which I
>believe is an option with the LASAR system. I seem to remember some
>issues in past postings concerning the CHT probe. I'd appreciate any
>words of wisdom from current LASAR users that you might pass along to
>help me out during my installation.
>
>Thanks,
>
>Jim Gray
>
>
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Instruments for sale |
--> RV-List message posted by: mkejrj@comcast.net
RV Listers,
I have two brand new, never installed, TSO'ed instruments for sale. I purchased
same for instalation in my RV8 but they were not required due to installing
a BMA EFIS.
Turn Coordinator : RC Allen, Model 83A 11 14, All electric 14 volts with Bezel
lights,3 1/8", TSO C3b
Air Craft Spruce lists @ $755.00
Selling for $ 495.00
Vertical Speed Indicator : United Model 7000, 0 to 2000FPM, 3 1/8", TSO C86
Air Craft Spruce lists @ $ 274.00
Selling for $150.00
Please contact me direct via E Mail or phone if interested.
Dick Jordan (610 933 4183 )
RV8A Finishing
RV Listers,
I have two brand new, never installed, TSO'ed instruments for sale. I purchased
same for instalation in my RV8 but they were not required due to installing
a BMA EFIS.
Turn Coordinator : RC Allen, Model 83A 11 14, All electric 14 volts with Bezel
lights,3 1/8", TSO C3b
Air Craft Spruce lists @ $755.00
Selling for $ 495.00
Vertical Speed Indicator : United Model 7000, 0 to 2000FPM, 3 1/8", TSO C86
Air Craft Spruce lists @ $ 274.00
Selling for $150.00
Please contact me direct via E Mail or phone if interested.
Dick Jordan (610 933 4183 )
RV8A Finishing
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV stuff for sale... |
--> RV-List message posted by: "Paul Rice" <rice737@msn.com>
Hey Bob,
I'm building an RV-8, but my friend is interested in your flap kit. His
name is Dave, give him a call 856-447-0269 or e mail me back a
rice737@msn.com with your # and I'll have him call you.
Thanks Paul
----- Original Message -----
From: "Bob" <rpgross@bellsouth.net>
Subject: RV-List: RV stuff for sale...
> --> RV-List message posted by: "Bob" <rpgross@bellsouth.net>
>
> Thanks to all of you you took this stuff away. All will ship today or
> tomorrow.
> I still need to find a new home for the Vans RV-6 Electric Flap conversion
> kit. It's new in the box. cost was $500 will sell for $250 plus shipping.
> Also have one more Matronics Governor III.New in box $30 plus shiping.
>
> PM me if interested
>
>
> Warmest Regards,
>
> Bob Gross
> For the latest F1 Rocket/Synthetic Vision progress, click here...
> www.F1-RocketBoy.com
> Like Awesome Airplanes?? Click here WWW.BrutalPower.net to read about the
> 322 Horsepower Vans SUPER SIX!
>
> -----Disclaimer---------
> The contents of this E-mail (including contents of enclosure/(s) or
> attachment/(s) if any are privileged & confidential material of Innovative
> Aviation Systems Inc. or RocketBoy Aircraft Products Inc. and should not
> be
> disclosed to, used by, or copied in any manner by anyone other than
> intended
> addressee/(s).If this E-mail (including enclosure/(s) or attachment/(s) if
> any has been received in error, please advise sender immediately and
> delete
> it from your system. The views expressed in this E-mail message (including
> enclosure/(s) or attachment/(s) if any are those of the individual sender.
>
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Bob Collins" <bcollinsrv7a@comcast.net>
The RVATor isn't sent first class anymore. Some people will get it sooner
than others. Presumably folks will eventually get theirs.
On the subject of delivery systems. You know, I just ordered a bag of
nutplates and some ProSeal (the little 6 oz one). I paid $4 for handling to
Van's and a $7 freight charge to, I assume) UPS who got the package from
Van's last Monday and delivered it 8 days later. $11 on a $20 order.
One of these days, I'm gonna figure out how much the amount soaked into this
project is "handling and shipping" charges. (g)
Do not archive
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Marty
Subject: RE: RV-List: RvAtor Receipt?
--> RV-List message posted by: "Marty" <martorious@earthlink.net>
Still waiting in Indiana...
Marty in Indiana
RV-8A Preview plans in Hand
do not archive
>-----Original Message-----
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Rubber "h-channel" - wing root channel |
--> RV-List message posted by: Mickey Coggins <mick-matronics@rv8.ch>
Hi,
Does anyone know where I can buy some slightly larger
"h-channel" like that used on the wing root and h-stab?
I've checked McMaster, no luck.
Thanks,
Mickey
--
Mickey Coggins
http://www.rv8.ch/
#82007 finishing
do not archive
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fly-in in Western North Carolina Saturday the 24th |
--> RV-List message posted by: "Wesley Robinson Stanford" <wesleyt@stanfordfurniture.com>
EAA Chapter 731 is holding a Fly-in - Young Eagles rally this Saturday the
24th from 8:30am till 4:00pm.
It is being held at the Morganton-Lenoir airport in Western NC.
No fees and the AvGas is 3.49 a gallon.
If you are in the area drop by for a hamburger or hotdog.
A best RV award will be given.
For more info see the chapter website. HYPERLINK
"http://www.eaa731.org"www.eaa731.org
Wesley T Robinson
RV-9A N224WR
DO NOT ARCHIVE
--
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: bertrv6@highstream.net
Hello:
I received a lot of information, on my questions about bifocal..
thanks to all..
The question now is, where is the best place to get, the Bifocal
on a Sun glasses, type, green in color.. Some one wrote, J&J, don't know
what that is..so I will have only one pair when flying, another in plain clear
plastic?
With this, I will be ready..
Thanks to all
Bert
rv6a
on my 40hrs...
Do Not archive
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: LASAR and CHT Probe |
--> RV-List message posted by: Walter Tondu <walter@tondu.com>
On 09/20 10:16, Jim Gray wrote:
> I'm just beginning installation of LASAR electronic ignition on my RV-8
> and noticed it came with a cylinder head temperature probe, which I
> believe is an option with the LASAR system. I seem to remember some
> issues in past postings concerning the CHT probe. I'd appreciate any
> words of wisdom from current LASAR users that you might pass along to
> help me out during my installation.
Having just gone through a LASAR installation I can speak to this.
I received my LASAR controller with a CHT probe but did not want to
intall the probe. If you have a controller with a CHT probe, you
MUST install the probe. I don't know if tieing it to something else
will work or not but I suggest that it will not. If you don't
want to use the CHT probe then send it and the controller back to
Unison in exchange for a controller that does not need it. There are
two versions of the controller, one requires the CHT probe, the other
does not.
About how the CHT controller works. At cruise, the controller will
retard timing one degree for every degree above 425 (CHT).
During full power climbs the controller will retard timing one
degree for every degree above 485 (CHT).
Personnaly, I like LASAR.
--
Walter Tondu
http://www.rv7-a.com
Flying!
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Anywhere map? |
--> RV-List message posted by: "Jeff Dowling" <shempdowling2@earthlink.net>
The other problem with Mountain Scope is that it cant run both inst app's
and weather. I forgot if it can do either of them. Its great if you fly in
the mountains alot but otherwise I think you give up too much.
Shemp/Jeff Dowling
RV-6A, N915JD
235 hours
Chicago/Louisville
----- Original Message -----
From: "Greg Young" <gyoung@cs-sol.com>
Subject: RE: RV-List: Anywhere map?
> --> RV-List message posted by: "Greg Young" <gyoung@cs-sol.com>
>
> I know it will run on the HP4705 Ipaq 'cause they used it in their demo at
> SnF. Probably needs a hi-res PDA like the 4705 though. I was very
> impressed with the MountainScope product and the folks behind it. They
> exude the same kind of quiet technical competence I see from Greg Toman
> and Grand Rapids. I'll likely switch to them if I talk myself out of the
> 396.
>
> Greg Young
>
> ________________________________
>
>
> --> RV-List message posted by: "Jeff Dowling"
> <shempdowling2@earthlink.net>
>
> I dont think mountain scope can run on a pda.
>
> do not archive
>
> Shemp/Jeff Dowling
> RV-6A, N915JD
> 235 hours
> Chicago/Louisville
>
> ----- Original Message -----
>> --> RV-List message posted by: David Leonard <wdleonard@gmail.com>
>>
>> Visibility is not as good as some of the aviation handhelds, but that is
>> its
>> only draw-back. Still usable in any amount of daylight, I really love the
>> following features:
>> Easy to upgrade software and database
>> Flight planning where ever you are - I use my iPaq at work all the time
>> You already know how to use it.
>> Versatile GPS options
>> If you are considering iPaq also look into MountainScope software:
>> http://www.pcavionics.com/custserv/index.jsp
>> The 3-d terrain is simply unsurpassed and most other features are about
>> like anywhere map. Same Price.
>>
>> --
>> Dave Leonard
>> Turbo Rotary RV-6 N4VY
>> http://members.aol.com/_ht_a/rotaryroster/index.html
>> http://members.aol.com/_ht_a/vp4skydoc/index.html
>> On 9/18/05, bill shook <billshook2000@yahoo.com> wrote:
>
>
>
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Compass Correction Card spreadsheet |
--> RV-List message posted by: "John Furey" <john@fureychrysler.com>
Lynn, Please send it to me also.
Thanks,
John@fureychrysler.com
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Compass Correction Card spreadsheet |
--> RV-List message posted by: linn walters <lwalters2@cfl.rr.com>
John Furey wrote:
>--> RV-List message posted by: "John Furey" <john@fureychrysler.com>
>
>Lynn, Please send it to me also.
>
>Thanks,
>John@fureychrysler.com
>
>
>
>
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Marty" <martorious@earthlink.net>
Ok, the wait is over. The wife just called and said it was in the box
when she got home.
C'mon quitting time!
Marty in Indiana
RV-8A Preview plans in Hand
do not archive
>-----Original Message-----
>From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-
>server@matronics.com] On Behalf Of Marty
>Sent: Wednesday, September 21, 2005 7:39 AM
>To: rv-list@matronics.com
>Subject: RE: RV-List: RvAtor Receipt?
>
>--> RV-List message posted by: "Marty" <martorious@earthlink.net>
>
>Still waiting in Indiana...
>
>Marty in Indiana
>RV-8A Preview plans in Hand
>do not archive
>>-----Original Message-----
>>From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-
>>server@matronics.com] On Behalf Of Bob Perkinson
>>Sent: Tuesday, September 20, 2005 8:37 PM
>>To: rv-list@matronics.com
>>Subject: RE: RV-List: RvAtor Receipt?
>>
>>--> RV-List message posted by: "Bob Perkinson"
>><bobperk@bellsouth.net>
>>
>>Still waiting for my copy in Tennessee.
>>
>>Bob Perkinson
>>Hendersonville, TN.
>>RV9 N658RP Reserved
>>If nothing changes
>>Nothing changes
>>
>>
>> Do Not Archive
>>
>>
>
>
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Houston Hurricane Evacuees (planes) |
--> RV-List message posted by: Charlie England <ceengland@bellsouth.net>
Bryan Jones wrote:
>--> RV-List message posted by: "Bryan Jones" <rv_8pilot@hotmail.com>
>
>Anyone have any recommended locations for secure storage of an RV near
>Dallas Love Field? Anything at Love itself, possibly? Would prefer a
>hangar, but secure is the main concern. Myself and some local buddies might
>decide to evac 3-4 planes tomorrow or thursday.
>
>Would want to fly SWA back to HOU as soon as the planes were relocated, then
>pick back up a few days later.
>
>Thanks in advance.
>
>Bryan Jones
>Houston
>
We are just NW of Jackson MS & Jackson (JAN) has SWA service. We also
have a couple of spare bedrooms & neighbors with rooms as well, if you
need to ride out the storm.
Charlie England
Slobovia Outernational (MS71)
601.879.9596
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Brett Hahn" <abakerson@zianet.com>
FYI:
If anybody needs a place to stay or a safe place to put an airplane they are
welcome with us in Las Cruces NM, (airport - KLRU)
We will be high and dry and will find accommodations for you here.
Brett Hahn
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Frank Stringham" <fstringham@hotmail.com>
Marty
It is a great read. Especially the round the world flight. Last year at this
time I ahd the preview in hand. Emp in the box and juyst finished the
practice kit. Since then....emp complete...wings done except for wiring and
trio wing leveler servo install, and the fuse has the center and aft
connected.
It has been great fun, hard work, and frustratinjg at
times................but progress non the less. Go for
it............................
Frank @ sgu and slc
>From: "Marty" <martorious@earthlink.net>
>Reply-To: rv-list@matronics.com
>To: <rv-list@matronics.com>
>Subject: RE: RV-List: RvAtor Receipt?
>Date: Wed, 21 Sep 2005 14:38:12 -0500
>
>--> RV-List message posted by: "Marty" <martorious@earthlink.net>
>
>Ok, the wait is over. The wife just called and said it was in the box
>when she got home.
>C'mon quitting time!
>
>Marty in Indiana
>RV-8A Preview plans in Hand
>do not archive
>
> >-----Original Message-----
> >From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-
> >server@matronics.com] On Behalf Of Marty
> >Sent: Wednesday, September 21, 2005 7:39 AM
> >To: rv-list@matronics.com
> >Subject: RE: RV-List: RvAtor Receipt?
> >
> >--> RV-List message posted by: "Marty" <martorious@earthlink.net>
> >
> >Still waiting in Indiana...
> >
> >Marty in Indiana
> >RV-8A Preview plans in Hand
> >do not archive
> >>-----Original Message-----
> >>From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-
> >>server@matronics.com] On Behalf Of Bob Perkinson
> >>Sent: Tuesday, September 20, 2005 8:37 PM
> >>To: rv-list@matronics.com
> >>Subject: RE: RV-List: RvAtor Receipt?
> >>
> >>--> RV-List message posted by: "Bob Perkinson"
> >><bobperk@bellsouth.net>
> >>
> >>Still waiting for my copy in Tennessee.
> >>
> >>Bob Perkinson
> >>Hendersonville, TN.
> >>RV9 N658RP Reserved
> >>If nothing changes
> >>Nothing changes
> >>
> >>
> >> Do Not Archive
> >>
> >>
> >
> >
>
>
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | CFI in Northern California |
0.15 HTML_TEXT_AFTER_BODY BODY: HTML contains text after BODY close tag
--> RV-List message posted by: "Travis Hamblen" <TravisHamblen@cox.net>
I am looking for a CFI in Northern California that would be willing to do
some training in my RV-6A. The ideal location would be near San Jose, CA.
I have 2 people that need 5 hours each of logged CFI time, willing to pay
the going rate. Any leads on someone would be greatly appreciated!
Travis Hamblen
702-255-3635
--
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Speed 3 Guy" <speed3guy@comcast.net>
I still haven't seen mine!
Guy
DO NOT ARCHIVE
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of
n1cxo320@peoplepc.com
Subject: RV-List: RvAtor Receipt?
--> RV-List message posted by: <n1cxo320@peoplepc.com>
I noticed that the RvAtor was mailed week before last...I have not received
one, have others got theirs yet?
DO NOT ARCHIVE
John
Message 24
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RvAtor Receipt? |
--> RV-List message posted by: Bobby Hester <bhester@hopkinsville.net>
Bob Perkinson wrote:
>--> RV-List message posted by: "Bob Perkinson" <bobperk@bellsouth.net>
>
>Still waiting for my copy in Tennessee.
>
>Bob Perkinson
>Hendersonville, TN.
>RV9 N658RP Reserved
>If nothing changes
>Nothing changes
>
>
>
Got mine yesturday :-)
--
Surfing the Web from Hopkinsville, KY
Visit my web site at: http://www.geocities.com/hester-hoptown/RVSite/
RV7A Slowbuild wings-QB Fuse :-)
Message 25
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RvAtor Receipt? |
--> RV-List message posted by: Jerry Springer <jsflyrv@comcast.net>
Bobby Hester wrote:
>--> RV-List message posted by: Bobby Hester <bhester@hopkinsville.net>
>
>Bob Perkinson wrote:
>
>
>
>>--> RV-List message posted by: "Bob Perkinson" <bobperk@bellsouth.net>
>>
>>Still waiting for my copy in Tennessee.
>>
>>Bob Perkinson
>>Hendersonville, TN.
>>RV9 N658RP Reserved
>>If nothing changes
>>Nothing changes
>>
>>
>>
>>
>>
>Got mine yesturday :-)
>
>
>
And now we will know it forever in the archive. :-(
do not archive
Message 26
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rubber "h-channel" - wing root channel |
--> RV-List message posted by: Rquinn1@aol.com
Try Aircraft Spruce part number 05-01300.
Rollie & Rod
RV6A 110 Hours
(Having it painted)
Message 27
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV-List message posted by: "Rick McCraw" <rmccraw@s4t.net>
Bert,
You're wondering where to get your glasses? I like Costco. Great prices,
and they stand behind the product, up to replacing it if you don't like it.
Rick
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of
bertrv6@highstream.net
Subject: RV-List: sun-glasses
--> RV-List message posted by: bertrv6@highstream.net
Hello:
I received a lot of information, on my questions about bifocal..
thanks to all..
The question now is, where is the best place to get, the Bifocal
on a Sun glasses, type, green in color.. Some one wrote, J&J, don't know
what that is..so I will have only one pair when flying, another in plain
clear
plastic?
With this, I will be ready..
Thanks to all
Bert
rv6a
on my 40hrs...
Do Not archive
Message 28
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: CFI in Northern California |
--> RV-List message posted by: Vanremog@aol.com
In a message dated 9/21/2005 3:21:51 P.M. Pacific Daylight Time,
TravisHamblen@cox.net writes:
I am looking for a CFI in Northern California that would be willing to do
some training in my RV-6A. The ideal location would be near San Jose, CA.
I have 2 people that need 5 hours each of logged CFI time, willing to pay
the going rate. Any leads on someone would be greatly appreciated!
It's possible that Peter (who's a CFI at Attitude Aviation) will do this in
Livermore (KLVK), CA.
GV (RV-6A N1GV O-360-A1A, C/S, Flying 761hrs, Silicon Valley, CA)
Message 29
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rubber "h-channel" - wing root channel |
--> RV-List message posted by: Mickey Coggins <mick-matronics@rv8.ch>
> Try Aircraft Spruce part number 05-01300.
Thanks - I had seen that one, and it's the
same dimensions as the Van's H-channel. I need
something just a bit larger.
--
Mickey Coggins
http://www.rv8.ch/
#82007 finishing
do not archive
Message 30
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rubber "h-channel" - wing root channel |
--> RV-List message posted by: Vanremog@aol.com
In a message dated 9/21/2005 7:40:45 A.M. Pacific Daylight Time,
mick-matronics@rv8.ch writes:
Does anyone know where I can buy some slightly larger
"h-channel" like that used on the wing root and h-stab?
I've checked McMaster, no luck.
Austin Hardware I think carries this. Check the Yeller Pages for the
contact info.
GV (RV-6A N1GV O-360-A1A, C/S, Flying 761hrs, Silicon Valley, CA)
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|