---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Thu 03/22/07: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:07 AM - Kitlog Pro (Bob Leffler) 2. 06:13 AM - Re: Aircraft Painting 101 Video (Matt Reeves) 3. 07:32 AM - Re: Kitlog Pro (Steve Davis) 4. 08:28 AM - Re: Aircraft Painting 101 Video (Robert E. Newhall II) 5. 08:59 AM - Re: Aircraft Painting 101 Video (renewhall2) 6. 09:22 AM - Re: Re: Aircraft Painting 101 Video (Darrell Reiley) 7. 09:45 AM - Top this if you can. (Jerry2DT@aol.com) 8. 10:14 AM - Re: Re: Aircraft Painting 101 Video (Darrell Reiley) 9. 10:56 AM - Re: Top this if you can. (John Porter) 10. 12:58 PM - Re: Any RV-9s near middle Tennessee? (Bob Perkinson) 11. 12:59 PM - RV owners or EAA members in Asheville, NC (Richard Suffoletto) 12. 02:01 PM - (marknlisa@hometel.com) 13. 02:52 PM - Re: RV owners or EAA members in Asheville, NC (Larry Bowen) 14. 03:55 PM - Re: Top this if you can. (Patrick Kelley) 15. 06:38 PM - Re: Top this if you can. (Frank Stringham) ________________________________ Message 1 _____________________________________ Time: 04:07:54 AM PST US From: "Bob Leffler" Subject: RV-List: Kitlog Pro I've been working with Matt Dralle over the last couple days on a problem that impacts all Kitlog Pro users. I am glad to report that he has fixed the problem in which paragraphs are run together. All you have to do is to save the offending pages again and re-upload them to mykitlog.com. Matt was unaware of the issue, but promptly fixed the problem once I gave him the specifics of the issue. It appears that we've already benefited from Matronics purchasing Kitlog Pro. The previous owner was aware of this issue for several months and chose to do nothing. Great support Matt! Bob N410BL - RV-10 N3493R - PA-28 ________________________________ Message 2 _____________________________________ Time: 06:13:36 AM PST US From: Matt Reeves Subject: Re: RV-List: Aircraft Painting 101 Video This depends on the paint. I use Imron 6000 and always wait a day at 77F but your paint will say. Matt "smitty@smittysrv.com" wrote: I just finished watching the Sam Jones video on Aircraft Painting 101 and was making notes. There is a part where he talks about painting on graphics over the base coat using Fine Line tape, but he doesn't say how long to wait after putting on the base coat to starting on the graphics (ie stripes and stuff). How long should you wait before adding color graphics or stripes after putting on the base coat? Have a goodun! Smitty http://SmittysRV.com -------------------------------------------------------------------- mail2web LIVE Free email based on Microsoft Exchange technology - http://link.mail2web.com/LIVE --------------------------------- Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. Check it out. ________________________________ Message 3 _____________________________________ Time: 07:32:33 AM PST US From: "Steve Davis" Subject: Re: RV-List: Kitlog Pro Let me be the first to congratulate Matt on his purchase of Kitlog Pro and I know he will do a fine job as he has with everything else he does. I would like to say in the defense of the previous owner that I'm real sure he was aware of the problems and I know for a fact that he would have taken care of them, but other things have been on his mind as of late, maybe leaving two little girls behind to go fight a war in Afghanistan for a year would justify for a real good reason. Paul, we love you brother, will pray everyday for your safe return, you stay safe and get home as quick as you can!! Steve Davis The Panel Pilot www.thepanelpilot.com ----- Original Message ----- From: Bob Leffler To: rv-list@matronics.com ; rv10-list@matronics.com Sent: Thursday, March 22, 2007 6:05 AM Subject: RV-List: Kitlog Pro I've been working with Matt Dralle over the last couple days on a problem that impacts all Kitlog Pro users. I am glad to report that he has fixed the problem in which paragraphs are run together. All you have to do is to save the offending pages again and re-upload them to mykitlog.com. Matt was unaware of the issue, but promptly fixed the problem once I gave him the specifics of the issue. It appears that we've already benefited from Matronics purchasing Kitlog Pro. The previous owner was aware of this issue for several months and chose to do nothing. Great support Matt! Bob N410BL - RV-10 N3493R - PA-28 ------------------------------------------------------------------------- ----- 3/16/2007 12:12 PM ________________________________ Message 4 _____________________________________ Time: 08:28:41 AM PST US From: "Robert E. Newhall II" Subject: RV-List: RE: Aircraft Painting 101 Video BTW, I used the Sam James Aircraft Painting 101 Video and found it very helpful. You can see the results on my flight instruction site here (shameless plug, I know): http://renewhall2.googlepages.com/home I'm finished with the DVD. If anyone would like it, the first $15 takes it (shipping included). (It's $25.95 on Builder's Bookstore). Bob N829RV Boulder, CO Subject: RE: Aircraft Painting 101 Video From: Bob Leffler (rvmail@thelefflers.com) The answer is, it depends....... Since temperature and humidity varies, it will be different depending on your circumstances. I've heard horror stories from folks that finished up in the afternoon and came back the next morning to finish trim. The tape left visible marks because the paint wasn't totally cured. I personally would wait 24-48 hours depending on weather conditions. -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of smitty@smittysrv.com Sent: Wednesday, March 21, 2007 5:02 PM Subject: Aircraft Painting 101 Video I just finished watching the Sam Jones video on Aircraft Painting 101 and was making notes. There is a part where he talks about painting on graphics over the base coat using Fine Line tape, but he doesn't say how long to wait after putting on the base coat to starting on the graphics (ie stripes and stuff). How long should you wait before adding color graphics or stripes after putting on the base coat? Have a goodun! Smitty http://SmittysRV.com -------------------------------------------------------------------- mail2web LIVE - Free email based on MicrosoftR Exchange technology - http://link.mail2web.com/LIVE ________________________________ Message 5 _____________________________________ Time: 08:59:49 AM PST US Subject: RV-List: Re: Aircraft Painting 101 Video From: "renewhall2" BTW, I used the Sam James Aircraft Painting 101 Video and found it very helpful. If anyone would like my DVD, the first $15 takes it (shipping included). (It's $25.95 on Builder's Bookstore). You can see the paint results on my flight instruction site here (shameless plug): http://renewhall2.googlepages.com/home Bob -------- Bob Newhall N829RV RV Transition Training Boulder, CO renewhall2.googlepages.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=102306#102306 ________________________________ Message 6 _____________________________________ Time: 09:22:27 AM PST US From: Darrell Reiley Subject: Re: RV-List: RE: Aircraft Painting 101 Video I'll take it... Darrell --- "Robert E. Newhall II" wrote: > II" > > BTW, I used the Sam James Aircraft Painting 101 > Video > and found it very helpful. You can see the results > on > my flight instruction site here (shameless plug, I > know): http://renewhall2.googlepages.com/home > > I'm finished with the DVD. If anyone would like it, > the first $15 takes it (shipping included). (It's > $25.95 on Builder's Bookstore). > > Bob > N829RV > Boulder, CO > > > > > Subject: RE: Aircraft Painting 101 Video > From: Bob Leffler (rvmail@thelefflers.com) > Date: Wed Mar 21 - 3:09 PM > > The answer is, it depends....... > > Since temperature and humidity varies, it will be > different depending on > your circumstances. > > I've heard horror stories from folks that finished > up > in the afternoon and > came back the next morning to finish trim. The tape > left visible marks > because the paint wasn't totally cured. > > I personally would wait 24-48 hours depending on > weather conditions. > > -----Original Message----- > From: owner-rv-list-server@matronics.com > [mailto:owner-rv-list-server@matronics.com] On > Behalf > Of > smitty@smittysrv.com > Sent: Wednesday, March 21, 2007 5:02 PM > To: rv-list@matronics.com > Subject: Aircraft Painting 101 Video > > > I just finished watching the Sam Jones video on > Aircraft Painting 101 and > was making notes. There is a part where he talks > about > painting on graphics > over the base coat using Fine Line tape, but he > doesn't say how long to > wait after putting on the base coat to starting on > the > graphics (ie stripes > and stuff). > > How long should you wait before adding color > graphics > or stripes after > putting on the base coat? > > Have a goodun! > Smitty > http://SmittysRV.com > > > -------------------------------------------------------------------- > mail2web LIVE - Free email based on MicrosoftR > Exchange technology - > http://link.mail2web.com/LIVE > > > > > > browse > Subscriptions page, > FAQ, > > Web Forums! > > > > > Be a PS3 game guru. Get your game face on with the latest PS3 news and previews at Yahoo! Games. http://videogames.yahoo.com/platform?platform=120121 ________________________________ Message 7 _____________________________________ Time: 09:45:40 AM PST US From: Jerry2DT@aol.com Subject: RV-List: Top this if you can. Yesterday, 03/21/2007, N18XP, RV-6a QB kit #60534 took to the air from Newberg, OR. This was quite the red letter day in other respects also, one that I think other builders are going to have a tough time matching... Not only did my -6a "baby" become an airplane, but another baby was born, our first great-grandchild. Sophie arrived just 3 hours before first flight, and weighed 8 lbs with dark hair and blue eyes. We are so very blessed. N18XP flew flawlessly, with her Superior IO360 and Hartzell 74" blended airfoil prop. The six years spent building were rewarding in every way, and I truly believe I learned something new each one of those days. Thank you Van, for such a great design, and your outstanding crew at Van's, particularly Dale, Gus, and Rob, always very helpful, and Ken Scott who gave me that first "$30,000 Ride" where I was instantly hooked. I'd also like to thank Bob Haan, Dan Benua, Len Kauffman, Frank Sneed and many others from EAA105 along the way for all the help, without which this journey would have been much tougher. Oh, and I better mention the folks online at the "RV-list", "Aeroelectric List" and "Vans AF", LOTS of help there... Now to get those 40 hours flown off... Yah, someone's got to do it!! Jerry Cochran Sherwood, Oregon Find out more about what's free from AOL at http://www.aol.com. ________________________________ Message 8 _____________________________________ Time: 10:14:26 AM PST US From: Darrell Reiley Subject: Re: RV-List: Re: Aircraft Painting 101 Video Thanks Robert! I just mailed your check. Darrell --- renewhall2 wrote: > > > BTW, I used the Sam James Aircraft Painting 101 > Video and found it very helpful. If anyone would > like my DVD, the first $15 takes it (shipping > included). (It's $25.95 on Builder's Bookstore). > > You can see the paint results on my flight > instruction site here (shameless plug): > http://renewhall2.googlepages.com/home > > Bob > > -------- > Bob Newhall > N829RV > RV Transition Training > Boulder, CO > renewhall2.googlepages.com > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=102306#102306 > > > > > > > > > browse > Subscriptions page, > FAQ, > > Web Forums! > > > > > http://answers.yahoo.com/dir/?link=list&sid=396546091 ________________________________ Message 9 _____________________________________ Time: 10:56:17 AM PST US From: "John Porter" Subject: Re: RV-List: Top this if you can. Jerry, This is hilarious!! I'm back in ATL and looking at the list. Congratulations on a great flight! Can sure agree that you were off in about 4 seconds and she looked good! And now a great grandfather. You must have gotten married when you were 11, ha,ha. Well, I don't need anymore inspiration! Going to get her finished and we'll have two "real" airplanes at Sportsman! Great job! John Porter 80002 ----- Original Message ----- From: Jerry2DT@aol.com To: rv-list@matronics.com Sent: Thursday, March 22, 2007 12:44 PM Subject: RV-List: Top this if you can. Yesterday, 03/21/2007, N18XP, RV-6a QB kit #60534 took to the air from Newberg, OR. This was quite the red letter day in other respects also, one that I think other builders are going to have a tough time matching... Not only did my -6a "baby" become an airplane, but another baby was born, our first great-grandchild. Sophie arrived just 3 hours before first flight, and weighed 8 lbs with dark hair and blue eyes. We are so very blessed. N18XP flew flawlessly, with her Superior IO360 and Hartzell 74" blended airfoil prop. The six years spent building were rewarding in every way, and I truly believe I learned something new each one of those days. Thank you Van, for such a great design, and your outstanding crew at Van's, particularly Dale, Gus, and Rob, always very helpful, and Ken Scott who gave me that first "$30,000 Ride" where I was instantly hooked. I'd also like to thank Bob Haan, Dan Benua, Len Kauffman, Frank Sneed and many others from EAA105 along the way for all the help, without which this journey would have been much tougher. Oh, and I better mention the folks online at the "RV-list", "Aeroelectric List" and "Vans AF", LOTS of help there... Now to get those 40 hours flown off... Yah, someone's got to do it!! Jerry Cochran Sherwood, Oregon ------------------------------------------------------------------------- ----- AOL.com. ________________________________ Message 10 ____________________________________ Time: 12:58:45 PM PST US From: "Bob Perkinson" Subject: RE: RV-List: Any RV-9s near middle Tennessee? All you need to do is go down the road a little ways to Pleasant View. Jerry Vannatta and John VonDohlen have flying 9A's hangered at Weakleys field. A little further down the road in Joelton Joe Moore is about to launch his 9A. Mine is still a long ways from getting off the ground. Bob Perkinson Hendersonville, TN. RV9 N658RP Reserved If nothing changes Nothing changes Sure come on up, I have about 13 hrs. on my 7A. I know someone in Mayfield, KY that has a RV9 tail that he is about ready to start riveting together. Rupert Holmes holmes@vci.net Surfing the web with my laptop from Hopkinsville, KY Visit my RV7A website: http://webpages.charter.net/bobbyhester/MyFlyingRV7A.htm Rick Spriggle wrote: Hello all. I'm very close to pulling the trigger on an RV-9A for my second build project (a Sonex being the first). Just curious if there are any -9 builders and/or flyers in either middle TN or south central KY? I know Bobby Hestor is right here in Hoptown with his -7. (Bobby - I want to come up with Robert and Doug sometime to check out your -7!) Thanks, Rick Spriggle Clarksville, TN ________________________________ Message 11 ____________________________________ Time: 12:59:41 PM PST US From: "Richard Suffoletto" Subject: RV-List: RV owners or EAA members in Asheville, NC > > I would like to communicate with any RV owners or EAA members in > Asheville, NC. I have tried through the local EAA chapter but they do not > have a email address listed on their site and any Pvt email addresses on > the site get bounced back. > > Thanks > Richard N623RS > > -- 3/22/2007 > 7:44 AM > > -- 3/22/2007 7:44 AM ________________________________ Message 12 ____________________________________ Time: 02:01:56 PM PST US Subject: RV-List: From: marknlisa@hometel.com Listers, Are there any Subaru-powered RVs in the Saint Louis area? Mark Sletten DO NOT ARCHIVE ________________________________ Message 13 ____________________________________ Time: 02:52:51 PM PST US Subject: Re: RV-List: RV owners or EAA members in Asheville, NC From: "Larry Bowen" You might try the SERV list. I know there is at least one RV based there. http://bowenaero.com/serv/ -- Larry Bowen Larry@BowenAero.com http://BowenAero.com Richard Suffoletto wrote: > > >> >> I would like to communicate with any RV owners or EAA members in >> Asheville, NC. I have tried through the local EAA chapter but they do >> not >> have a email address listed on their site and any Pvt email addresses on >> the site get bounced back. >> >> Thanks >> Richard N623RS >> >> -- > 3/22/2007 >> 7:44 AM >> >> > -- > 3/22/2007 > 7:44 AM > > ________________________________ Message 14 ____________________________________ Time: 03:55:55 PM PST US From: "Patrick Kelley" Subject: RE: RV-List: Top this if you can. I will be very disappointed if you don't name your plane "Sophie". Congratulations on a great day. Pat Kelley - RV-6A - Panel structure almost ready to go to avionics installer. _____ From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Jerry2DT@aol.com Sent: Thursday, March 22, 2007 9:45 AM Subject: RV-List: Top this if you can. Yesterday, 03/21/2007, N18XP, RV-6a QB kit #60534 took to the air from Newberg, OR. This was quite the red letter day in other respects also, one that I think other builders are going to have a tough time matching... Not only did my -6a "baby" become an airplane, but another baby was born, our first great-grandchild. Sophie arrived just 3 hours before first flight, and weighed 8 lbs with dark hair and blue eyes. We are so very blessed. N18XP flew flawlessly, with her Superior IO360 and Hartzell 74" blended airfoil prop. The six years spent building were rewarding in every way, and I truly believe I learned something new each one of those days. Thank you Van, for such a great design, and your outstanding crew at Van's, particularly Dale, Gus, and Rob, always very helpful, and Ken Scott who gave me that first "$30,000 Ride" where I was instantly hooked. I'd also like to thank Bob Haan, Dan Benua, Len Kauffman, Frank Sneed and many others from EAA105 along the way for all the help, without which this journey would have been much tougher. Oh, and I better mention the folks online at the "RV-list", "Aeroelectric List" and "Vans AF", LOTS of help there... Now to get those 40 hours flown off... Yah, someone's got to do it!! Jerry Cochran Sherwood, Oregon _____ AOL.com. ________________________________ Message 15 ____________________________________ Time: 06:38:38 PM PST US From: "Frank Stringham" Subject: RE: RV-List: Top this if you can. Jerry Congrats.......for both accomplishments.... Frank @ SGU RV7A "NDY" >From: Jerry2DT@aol.com >To: rv-list@matronics.com >Subject: RV-List: Top this if you can. Date: Thu, 22 Mar 2007 12:44:39 EDT > > >Yesterday, 03/21/2007, N18XP, RV-6a QB kit #60534 took to the air from >Newberg, OR. This was quite the red letter day in other respects also, one >that I >think other builders are going to have a tough time matching... Not only >did >my -6a "baby" become an airplane, but another baby was born, our first >great-grandchild. Sophie arrived just 3 hours before first flight, and >weighed 8 >lbs with dark hair and blue eyes. >We are so very blessed. > >N18XP flew flawlessly, with her Superior IO360 and Hartzell 74" blended >airfoil prop. The six years spent building were rewarding in every way, and >I >truly believe I learned something new each one of those days. >Thank you Van, for such a great design, and your outstanding crew at >Van's, >particularly Dale, Gus, and Rob, always very helpful, and Ken Scott who >gave >me that first "$30,000 Ride" where I was instantly hooked. > >I'd also like to thank Bob Haan, Dan Benua, Len Kauffman, Frank Sneed and >many others from EAA105 along the way for all the help, without which this >journey would have been much tougher. Oh, and I better mention the folks >online >at the "RV-list", "Aeroelectric List" and "Vans AF", LOTS of help there... > >Now to get those 40 hours flown off... Yah, someone's got to do it!! > >Jerry Cochran >Sherwood, Oregon > > > Find out more about what's free from AOL at http://www.aol.com. _________________________________________________________________ Watch free concerts with Pink, Rod Stewart, Oasis and more. Visit MSN Presents today. http://music.msn.com/presents?icid=ncmsnpresentstagline&ocid=T002MSN03A07001 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.