---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Sun 06/24/07: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:51 AM - Re: Prop control label again (Dale Ensing) 2. 05:56 AM - Re: Prop control label again (Larry Bowen) 3. 06:56 AM - Re: Prop control label again (Sam Buchanan) 4. 07:44 AM - Re: Prop control label again (David Dalton) 5. 01:20 PM - RV 6a N526W got bent (Matt Jurotich) 6. 02:01 PM - Re: RV 6a N526W got bent (Konrad L. Werner) 7. 07:38 PM - Re: Prop control label again (Greg Young) 8. 09:42 PM - Canopy Cover (Jerry Isler) 9. 10:10 PM - Re: Prop control label again (Fiveonepw@aol.com) 10. 10:20 PM - Re: Prop control label again (Fiveonepw@aol.com) ________________________________ Message 1 _____________________________________ Time: 03:51:32 AM PST US From: "Dale Ensing" Subject: Re: RV-List: Prop control label again "PUSH - MAX RPM" Dale Ensing ----- Original Message ----- From: Fiveonepw@aol.com To: rv-list@matronics.com Sent: Sunday, June 24, 2007 2:40 AM Subject: RV-List: Prop control label again OK, let me try this again... For THOSE OF YOU who have LABELS on YOUR prop controls, what does it say? I did NOT ask for a discussion regarding WHY, just the simple question. Zero info so far. Does this simply indicate no one is willing to stick their necks out here for fear of a political roast? (I know, dumb question- I've been here a loooong time) Believe me, I understand- if this is the case, please respond off-list- my direct e-mail is fiveonepw@aol.com I AM including a label and simply curious what would be most appropriate! C'mon, guys- this has nothing to do with primer... Mark do not archive ------------------------------------------------------------------------- ----- See what's free at AOL.com. ________________________________ Message 2 _____________________________________ Time: 05:56:53 AM PST US From: "Larry Bowen" Subject: Re: RV-List: Prop control label again I have the deluxe throttle quadrant from Van's, that comes engraved/labled already. Why don't you just mimic that? http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1182689606-374-186&browse=controls&product=delux-quadrant -- Larry Bowen Larry@BowenAero.com http://BowenAero.com On 6/24/07, Dale Ensing wrote: > > "PUSH - MAX RPM" > Dale Ensing > > ----- Original Message ----- > *From:* Fiveonepw@aol.com > *To:* rv-list@matronics.com > *Sent:* Sunday, June 24, 2007 2:40 AM > *Subject:* RV-List: Prop control label again > > OK, let me try this again... > > For THOSE OF YOU who have LABELS on YOUR prop controls, what does it say? > I did NOT ask for a discussion regarding WHY, just the simple > question. Zero info so far. Does this simply indicate no one is willing to > stick their necks out here for fear of a political roast? (I know, dumb > question- I've been here a loooong time) Believe me, I understand- if this > is the case, please respond off-list- my direct e-mail is > fiveonepw@aol.com I AM including a label and simply curious what would > be most appropriate! > > C'mon, guys- this has nothing to do with primer... > > Mark do not archive > > > ------------------------------ > See what's free at AOL.com . > > > * > > href="http://www.matronics.com/Navigator?RV-List">http://www.matronics.com/Navigator?RV-List > href="http://forums.matronics.com">http://forums.matronics.com > * > > * > > > * > > ________________________________ Message 3 _____________________________________ Time: 06:56:41 AM PST US From: Sam Buchanan Subject: Re: RV-List: Prop control label again Mark, attached is a photo of the labels in my plane. The image is small but the throttle label is "Pull for Idle" and the mixture is "Pull for Lean". I've seen you fly and you're pretty good..... ;-) Sam Buchanan ============================= Fiveonepw@aol.com wrote: > OK, let me try this again... > > For THOSE OF YOU who have LABELS on YOUR prop controls, what does it say? I > did NOT ask for a discussion regarding WHY, just the simple question. Zero > info so far. Does this simply indicate no one is willing to stick their necks > out here for fear of a political roast? (I know, dumb question- I've been here > a loooong time) Believe me, I understand- if this is the case, please > respond off-list- my direct e-mail is _fiveonepw@aol.com_ > (mailto:fiveonepw@aol.com) I AM including a label and simply curious what would be most appropriate! ________________________________ Message 4 _____________________________________ Time: 07:44:43 AM PST US From: "David Dalton" Subject: Re: RV-List: Prop control label again High and Low seems to make the most sense to me. My son just built a laser router and I'm going to have him engrave my throttle quadrant (as well as the rest of the panel) with it. I could ask if he's looking for business to engrave other items. Let me know if anyone is interesting in laser engraving of similar items. David On 6/24/07, Fiveonepw@aol.com wrote: > > OK, let me try this again... > > For THOSE OF YOU who have LABELS on YOUR prop controls, what does it say? > I did NOT ask for a discussion regarding WHY, just the simple > question. Zero info so far. Does this simply indicate no one is willing to > stick their necks out here for fear of a political roast? (I know, dumb > question- I've been here a loooong time) Believe me, I understand- if this > is the case, please respond off-list- my direct e-mail is > fiveonepw@aol.com I AM including a label and simply curious what would > be most appropriate! > > C'mon, guys- this has nothing to do with primer... > > Mark do not archive > > > ------------------------------ > See what's free at AOL.com . > > > * > > > * > > ________________________________ Message 5 _____________________________________ Time: 01:20:45 PM PST US From: Matt Jurotich Subject: RV-List: RV 6a N526W got bent For those who may have noticed that N526W got bent. The pilot -me- is recovering. Many thanks to Van for designing a strong airframe and to my builder Robert E Burk. Robert is no longer with us but he built a very stout airplane. Matthew M. Jurotich e-mail mail to: phone : 301-286-5919 ________________________________ Message 6 _____________________________________ Time: 02:01:13 PM PST US From: "Konrad L. Werner" Subject: Re: RV-List: RV 6a N526W got bent Matt, What events happened to cause your accident? I'm glad that you can still share the story... Konrad ----- Original Message ----- From: Matt Jurotich To: rv-list@matronics.com Sent: Sunday, June 24, 2007 2:16 PM Subject: RV-List: RV 6a N526W got bent For those who may have noticed that N526W got bent. The pilot -me- is recovering. Many thanks to Van for designing a strong airframe and to my builder Robert E Burk. Robert is no longer with us but he built a very stout airplane. Matthew M. Jurotich e-mail mail to: phone : 301-286-5919 ________________________________ Message 7 _____________________________________ Time: 07:38:00 PM PST US From: "Greg Young" Subject: RE: RV-List: Prop control label again You must have missed my response... My RV used RPM PUSH INCREASE and my Navion uses PROPELLER PUSH INCR. Seems the other controls all use "Push" type labels too. Regards, Greg Young - Houston (DWH) RV-6 N6GY ...project Phoenix Navion N5221K - just an XXL RV-6A _____ From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Fiveonepw@aol.com Sent: Sunday, June 24, 2007 1:41 AM Subject: RV-List: Prop control label again OK, let me try this again... For THOSE OF YOU who have LABELS on YOUR prop controls, what does it say? I did NOT ask for a discussion regarding WHY, just the simple question. Zero info so far. Does this simply indicate no one is willing to stick their necks out here for fear of a political roast? (I know, dumb question- I've been here a loooong time) Believe me, I understand- if this is the case, please respond off-list- my direct e-mail is fiveonepw@aol.com I AM including a label and simply curious what would be most appropriate! C'mon, guys- this has nothing to do with primer... Mark do not archive ________________________________ Message 8 _____________________________________ Time: 09:42:47 PM PST US From: "Jerry Isler" Subject: RV-List: Canopy Cover What canopy cover do you guys recommend for my RV-4? Van's website talks about a heavy cover and a light weight cover. Since my plane is mostly hangered, the cover will be used for the occasional overnight stay outside. There does not appear to be much price difference between the two. Also, where is the best place to get one? Jerry Isler Donalsonville, GA RV-4 N455J (45.7 hrs) ________________________________ Message 9 _____________________________________ Time: 10:10:20 PM PST US From: Fiveonepw@aol.com Subject: Re: RV-List: Prop control label again In a message dated 6/24/2007 7:58:28 AM Central Daylight Time, Larry@bowenaero.com writes: I have the deluxe throttle quadrant from Van's, that comes engraved/labled already. Why don't you just mimic that? >>> Yeah, I checked that- trying to define one lable on bottom of panel "Prop - push(pull) ???? Thanks for the replies on&off list so far! Mark do not archive ************************************** See what's free at http://www.aol.com. ________________________________ Message 10 ____________________________________ Time: 10:20:31 PM PST US From: Fiveonepw@aol.com Subject: Re: RV-List: Prop control label again In a message dated 6/24/2007 9:00:03 AM Central Daylight Time, sbuc@hiwaay.net writes: I've seen you fly and you're pretty good..... ;-) Musta been a rare day- ATC towers from OSH to LAL have mug shots of my tail# on their walls 8-( Appreciate the reply, Sam Seeyah! Mark do not archive ************************************** See what's free at http://www.aol.com. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.