Today's Message Index:
----------------------
1. 08:34 PM - Re: VM1000 fuel pressure sender (carbureted) (Vanremog@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: VM1000 fuel pressure sender (carbureted) |
VMS sent me the new Honeywell sender (with the collective plug) and I would
like to confirm the function of the four numbered terminals. VMS sent me no
info on this and have not returned my call. My original sender had four
discrete quick disconnect tabs that were individually wired as:
SENDER pin 1 WHT TO DPU J3.5
SENDER.pin 2 BLK TO DPU J3.8
SENDER.pin 3 GRN TO DPU J3.6
SENDER.pin 4 RED TO DPU J3.7
Can anyone with the P/N 3010016 sender (with the collective plug) and the
VM1000 (not the VM1000C) confirm that the new sender has the same pin
correspondence and hooks up pin for pin the same way?
If it is not the same, please advise.
-Thx
GV (RV-6A N1GV O-360-A1A, C/S, Flying 859hrs, Silicon Valley, CA)
************************************** See what's free at http://www.aol.com.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|