---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Fri 11/16/07: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:05 AM - WTB: Ps PM-2000 intercom (Bob Gross) 2. 06:24 AM - Re: Gear leg do it yourself (Kelly Patterson) 3. 08:58 AM - Brand new Camloc set (SS) and Tru Trak backup battery for sale (Matt Reeves) 4. 09:33 AM - Re: Re: Gear leg do it yourself (Brian Meyette) 5. 09:46 AM - Re: Nose Gear Leg (Brian Meyette) 6. 10:20 AM - Re: Needed: Answer; Is Non-TSO Altimeter - Good for IFR? (Glen Matejcek) 7. 05:49 PM - Re: Nose Gear Leg (Bobby Hester) 8. 08:00 PM - Re: Re: Gear leg do it yourself (Bobby Hester) 9. 09:01 PM - Tail Wheel Training (Reginald C. Smith, Sr.) 10. 09:55 PM - Re: Needed: Answer; Is Non-TSO Altimeter - Good for IFR? (Greg Williams) 11. 10:32 PM - Re: Tail Wheel Training (rv6n@optonline.net) ________________________________ Message 1 _____________________________________ Time: 04:05:24 AM PST US Subject: RV-List: WTB: Ps PM-2000 intercom From: "Bob Gross" Looking for a new or used PM-2000 stereo intercom. Thanks Bob -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ ________________________________ Message 2 _____________________________________ Time: 06:24:17 AM PST US From: "Kelly Patterson" Subject: RV-List: Re: Gear leg do it yourself Guys & Gals, What about the efforts of a true home builder? Have we lost all of our skills? Don't you wish you had that money for gas in the tank? Well I do. My Plan: Cut my fork down by 1", throw a couple welds on the bottom, buy an adjustable threading die, thread another inch of the gear leg, cut an inch off of the gear leg, and put it back on the airplane. Total cost: under $100. Time: a day or two. Bonus: No change in the wheel pants. Tools req'd: hack saw, disk grinder, file, welder (will farm out), die (purchase), die holder (purchase), threading oil, drill. Here are the links: http://pages.suddenlink.net/tismuoi9/rvng/forks.jpg http://pages.suddenlink.net/tismuoi9/rvng.html Production Tool Supply www.pts-tools.com. Die ER6111616E (1.250" 16tpi) 2.5"OD for $40.50. A die holder EV50250 for about $15.75. Optional source: http://www1.mscdirect.com/CGI/NNSRIT?PMAKA=03946506 I won't do this for a month or so when my annual is due, therefore I won't have results for a while. Should be fun! Kelly Patterson RV-6A N716K 190 hours PHX, AZ Time: 09:25:18 AM PST US From: Denis Walsh Subject: Re: RV-List: Factory recall gear leg If you need the full boat, around $480. If you only need the minimum, around $300. Mine is in the mail. On Nov 15, 2007, at 8:41 , Jeff Dowling wrote: > > > > What does it cost for an rv6a? > > Shemp > do not archive ________________________________ Message 3 _____________________________________ Time: 08:58:01 AM PST US From: Matt Reeves Subject: RV-List: Brand new Camloc set (SS) and Tru Trak backup battery for sale My brother has a brand new, unopened set of Camlocs that he purchased for the RV-7A. He paid over $500 and right now the bidding is only $300 so here's a chance to save some $$$. There are 48 Stainless Steel UNOPENED Camlocs. Obviously, these will work on any other RV as well. Also, he has a brand new Tru Trak backup battery for sale both on ebay. Here's the links if anyone is interested. Might be able to save some money off retail and still get new. Matt CAMLOCS: http://cgi.ebay.com/ebaymotors/Skybolt-CAMLOC-fasteners-NEW-Vans-RV-7A-etc_W0QQcmdZViewItemQQcategoryZ26439QQihZ017QQitemZ270186303939QQrdZ1QQsspagenameZWDVW TRU TRAK back up battery: http://cgi.ebay.com/ebaymotors/TRUTRAK-ADI-3-BACKUP-BATTERY-NEW-14-volt_W0QQcmdZViewItemQQcategoryZ26436QQihZ017QQitemZ270186307533QQrdZ1QQsspagenameZWDVW --------------------------------- Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how. ________________________________ Message 4 _____________________________________ Time: 09:33:16 AM PST US From: "Brian Meyette" Subject: RE: RV-List: Re: Gear leg do it yourself A most excellent suggestion - I think it'd be far easier to cut & rethread my nose gear leg in place, rather than to try to remove it. My leg was installed TIGHT & not meant to come back out or loosen up. At the very least, I'd have to remove the engine frame, as the gear leg bolt fit was so tight it was driven in from below & would probably be quite difficult to drive back out. brian -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Kelly Patterson Sent: Friday, November 16, 2007 9:13 AM Subject: RV-List: Re: Gear leg do it yourself Guys & Gals, What about the efforts of a true home builder? Have we lost all of our skills? Don't you wish you had that money for gas in the tank? Well I do. My Plan: Cut my fork down by 1", throw a couple welds on the bottom, buy an adjustable threading die, thread another inch of the gear leg, cut an inch off of the gear leg, and put it back on the airplane. Total cost: under $100. Time: a day or two. Bonus: No change in the wheel pants. Tools req'd: hack saw, disk grinder, file, welder (will farm out), die (purchase), die holder (purchase), threading oil, drill. Here are the links: http://pages.suddenlink.net/tismuoi9/rvng/forks.jpg http://pages.suddenlink.net/tismuoi9/rvng.html Production Tool Supply www.pts-tools.com. Die ER6111616E (1.250" 16tpi) 2.5"OD for $40.50. A die holder EV50250 for about $15.75. Optional source: http://www1.mscdirect.com/CGI/NNSRIT?PMAKA=03946506 I won't do this for a month or so when my annual is due, therefore I won't have results for a while. Should be fun! Kelly Patterson RV-6A N716K 190 hours PHX, AZ Time: 09:25:18 AM PST US From: Denis Walsh Subject: Re: RV-List: Factory recall gear leg If you need the full boat, around $480. If you only need the minimum, around $300. Mine is in the mail. On Nov 15, 2007, at 8:41 , Jeff Dowling wrote: > > > > What does it cost for an rv6a? > > Shemp > do not archive 12:00 AM 12:00 AM ________________________________ Message 5 _____________________________________ Time: 09:46:59 AM PST US From: "Brian Meyette" Subject: RE: RV-List: Nose Gear Leg No, I wasn't aware of any of it until yesterday. Thanks for the link. brian -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Bobby Hester Sent: Thursday, November 15, 2007 8:09 PM Subject: Re: RV-List: Nose Gear Leg Did you even read the SB? http://www.vansaircraft.com/pdf/sb07-11-9.pdf ---- Surfing the web from Hopkinsville, KY Visit my RV7A web site: http://www.geocities.com/hester-hoptown/RVSite/ Brian Meyette wrote: > > So, to make this change, does one just have to swap out the fork, or does > the nose gear leg have to come out, too? I think it'd be near impossible > to get my nose gear leg out now. > > > -----Original Message----- > From: owner-rv-list-server@matronics.com > [mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer > Sent: Tuesday, November 13, 2007 10:43 PM > To: rv-list@matronics.com > Subject: RE: RV-List: Nose Gear Leg > > It is shortened from the bottom which increases ground clearance for the > fork but has no impact on prop clearance. Attached pix might help. Not > sure whose it is but it shows the difference well. > > Also the $100 from Lang is really $75 for machining and $25 for freight back > and he sends you a check for the diff. I think mine was about $8 back. He > did a perfect job and I had it back in two weeks. A bargain! Building the > box was the hard part. > > Bill S > 7a Ark > > -----Original Message----- > From: owner-rv-list-server@matronics.com > [mailto:owner-rv-list-server@matronics.com] On Behalf Of Emrath > Sent: Tuesday, November 13, 2007 8:16 PM > To: rv-list@matronics.com > Subject: RV-List: Nose Gear Leg > > > Has anyone found that shortening the leg in anyway reduces the prop ground > clearance? I also find that the Langair web site now states to include a > check for $100 and they will refund or bill for any difference. > > Marty in Brentwood TN > > > Time: 06:55:38 PM PST US > From: Ralph Hoover > Subject: RV-List: Price for nose gear leg? > > > Charlie, > Here is the story on the gear leg mod from Harmon Lang. This is to go from a > -2 to a -3, if you have the -1 I believe you need the new leg, I was unable > to find the price on "the list" either. You probably need to call Van's. > > /"The procedure to send the nose gear for modifying. > Pack it up in a box or tube and send it to Langair Machining 33094 Church > Rd. Warren Or. 97053. A drawing for a box is on the web site. A tube from a > carpet core also works. Include $75.00 for the work and enough to ship it > back. Cash or check. We don't take credit cards. Include a return label. We > will remove it from the container, cut the 1 in off, rethread and put it > back in the same container. The rethreading is done with a carbide thread > milling tool running in a CNC mill. If you have the mill you can do this > yourself. Cutter cost and set up will only cost about $300.00 or so. Expect > the time in our shop to be about 4 days. Until we know how many there will > be, we have to set one day aside to do the batch that comes in for the week. > Please help by making the repackaging go as easily as possible. NO > CONFUSION. Harmon"/ > > -----Original Message----- > From: Ralph Hoover [mailto:hooverra@verizon.net] > Sent: Saturday, November 10, 2007 7:41 AM > Subject: RV7A U603-2 Modification > > Harmon, > Please supply a quotation for modification of a Vans U-603-2 nose gear > leg to a U603-3 per SB 07-11-09. > Thank you > > -- Ralph C. Hoover RV7A hooverra at verizon dot net > > -- > Ralph C. Hoover > RV7A > hooverra at verizon dot net > > > Marty > > > List > 7-Day > > > 12:00 AM > > > > 12:00 AM > > > > 12:00 AM 12:00 AM ________________________________ Message 6 _____________________________________ Time: 10:20:05 AM PST US From: Glen Matejcek Subject: RV-List: Re: Needed: Answer; Is Non-TSO Altimeter - Good for IFR? Hi All- Mike: I've not heard of this customer initiative within the FAA before. This is great news, and word really needs to be spread. Like any other aspect of life, there are actually some really great, knowledgable, effective folks in the FAA. Unfortunately, they are overshadowed by the uneducated bureaucratic turds that most of us have encountered at one time or another. Putting some accountability to the folks that hold us accountable would be wonderful. (my personal favorite was a fed at the great lakes regional office telling me that in order to make skydives from the 20's each jumper would have to wear an encoding altimeter.... sheesh!) All: Where I currently live, we seem to have some pretty good feds. When I was trying to understand the legal requirements of my homebuilt panel as well as what I could expect from the local FSDO, I had them point out to me that Piper Aircraft (at least at one time) used non-tso instruments. They then showed that the airplane as a whole met all the required performance parameters. The only thing actually req'd to carry a TSO was any GPS to be used for terminal ops (aproaches). On a tangent, I have personally had issues with registering my plane. I called EAA, they called the dept head in OKC, and the next day my problem was gone. The bottom line seems to me to be that we have some formidable tools at our disposal. Resources like Mike, this list, and the EAA national HQ can really make good things happen. All we have to do is take the time to get educated and then actually go through the required steps. Glen Matejcek ________________________________ Message 7 _____________________________________ Time: 05:49:34 PM PST US From: Bobby Hester Subject: Re: RV-List: Nose Gear Leg Ok, sorry about sounding so harsh. We've been talking about this for about a week on the list. ---- Surfing the web from Hopkinsville, KY Visit my RV7A web site: http://www.geocities.com/hester-hoptown/RVSite/ Brian Meyette wrote: > > No, I wasn't aware of any of it until yesterday. Thanks for the link. > brian > > -----Original Message----- > From: owner-rv-list-server@matronics.com > [mailto:owner-rv-list-server@matronics.com] On Behalf Of Bobby Hester > Sent: Thursday, November 15, 2007 8:09 PM > To: rv-list@matronics.com > Subject: Re: RV-List: Nose Gear Leg > > > Did you even read the SB? > http://www.vansaircraft.com/pdf/sb07-11-9.pdf > > ---- > Surfing the web from Hopkinsville, KY > Visit my RV7A web site: http://www.geocities.com/hester-hoptown/RVSite/ > > > Brian Meyette wrote: > >> >> So, to make this change, does one just have to swap out the fork, or does >> the nose gear leg have to come out, too? I think it'd be near impossible >> to get my nose gear leg out now. >> >> >> -----Original Message----- >> From: owner-rv-list-server@matronics.com >> [mailto:owner-rv-list-server@matronics.com] On Behalf Of Bill Schlatterer >> Sent: Tuesday, November 13, 2007 10:43 PM >> To: rv-list@matronics.com >> Subject: RE: RV-List: Nose Gear Leg >> >> It is shortened from the bottom which increases ground clearance for the >> fork but has no impact on prop clearance. Attached pix might help. Not >> sure whose it is but it shows the difference well. >> >> Also the $100 from Lang is really $75 for machining and $25 for freight >> > back > >> and he sends you a check for the diff. I think mine was about $8 back. >> > He > >> did a perfect job and I had it back in two weeks. A bargain! Building the >> box was the hard part. >> >> Bill S >> 7a Ark >> >> -----Original Message----- >> From: owner-rv-list-server@matronics.com >> [mailto:owner-rv-list-server@matronics.com] On Behalf Of Emrath >> Sent: Tuesday, November 13, 2007 8:16 PM >> To: rv-list@matronics.com >> Subject: RV-List: Nose Gear Leg >> >> >> Has anyone found that shortening the leg in anyway reduces the prop ground >> clearance? I also find that the Langair web site now states to include a >> check for $100 and they will refund or bill for any difference. >> >> Marty in Brentwood TN >> >> >> Time: 06:55:38 PM PST US >> From: Ralph Hoover >> Subject: RV-List: Price for nose gear leg? >> >> >> Charlie, >> Here is the story on the gear leg mod from Harmon Lang. This is to go from >> > a > >> -2 to a -3, if you have the -1 I believe you need the new leg, I was >> > unable > >> to find the price on "the list" either. You probably need to call Van's. >> >> /"The procedure to send the nose gear for modifying. >> Pack it up in a box or tube and send it to Langair Machining 33094 Church >> Rd. Warren Or. 97053. A drawing for a box is on the web site. A tube from >> > a > >> carpet core also works. Include $75.00 for the work and enough to ship it >> back. Cash or check. We don't take credit cards. Include a return label. >> > We > >> will remove it from the container, cut the 1 in off, rethread and put it >> back in the same container. The rethreading is done with a carbide thread >> milling tool running in a CNC mill. If you have the mill you can do this >> yourself. Cutter cost and set up will only cost about $300.00 or so. >> > Expect > >> the time in our shop to be about 4 days. Until we know how many there will >> be, we have to set one day aside to do the batch that comes in for the >> > week. > >> Please help by making the repackaging go as easily as possible. NO >> CONFUSION. Harmon"/ >> >> -----Original Message----- >> From: Ralph Hoover [mailto:hooverra@verizon.net] >> Sent: Saturday, November 10, 2007 7:41 AM >> Subject: RV7A U603-2 Modification >> >> Harmon, >> Please supply a quotation for modification of a Vans U-603-2 nose gear >> leg to a U603-3 per SB 07-11-09. >> Thank you >> >> -- Ralph C. Hoover RV7A hooverra at verizon dot net >> >> -- >> Ralph C. Hoover >> RV7A >> hooverra at verizon dot net >> >> >> >> Marty >> >> >> >> >> List >> 7-Day >> >> >> >> >> 12:00 AM >> >> >> >> 12:00 AM >> >> >> >> >> >> >> >> >> >> > > > 12:00 AM > > > 12:00 AM > > > > ________________________________ Message 8 _____________________________________ Time: 08:00:04 PM PST US From: Bobby Hester Subject: Re: RV-List: Re: Gear leg do it yourself I don't think it is that easy. The gear leg is hardened and takes a special die to cut the threads. I've read messages on one of the list about people that have taken them to local shops and they could not cut the threads. I think I saw a message from the guy at http://www.langair.com/, that told someone, that the die cost about $300. Not sure about this but you can contact him for yourself and ask. ---- Surfing the web from Hopkinsville, KY Visit my RV7A web site: http://www.geocities.com/hester-hoptown/RVSite/ Kelly Patterson wrote: > > Guys & Gals, > What about the efforts of a true home builder? Have we lost all of our > skills? Don't you wish you had that money for gas in the tank? Well I do. > > My Plan: Cut my fork down by 1", throw a couple welds on the bottom, > buy an adjustable threading die, thread another inch of the gear leg, > cut an inch off of the gear leg, and put it back on the airplane. > Total cost: under $100. Time: a day or two. Bonus: No change in the > wheel pants. > > Tools req'd: hack saw, disk grinder, file, welder (will farm out), die > (purchase), die holder (purchase), threading oil, drill. > > Here are the links: > http://pages.suddenlink.net/tismuoi9/rvng/forks.jpg > http://pages.suddenlink.net/tismuoi9/rvng.html > > Production Tool Supply www.pts-tools.com. Die ER6111616E (1.250" > 16tpi) 2.5"OD for $40.50. A die holder EV50250 for about $15.75. > > Optional source: http://www1.mscdirect.com/CGI/NNSRIT?PMAKA=03946506 > > I won't do this for a month or so when my annual is due, therefore I > won't have results for a while. Should be fun! > > Kelly Patterson > RV-6A N716K 190 hours > PHX, AZ > > > Time: 09:25:18 AM PST US > From: Denis Walsh > Subject: Re: RV-List: Factory recall gear leg > > > If you need the full boat, around $480. If you only need the minimum, > around $300. > > Mine is in the mail. > On Nov 15, 2007, at 8:41 , Jeff Dowling wrote: > >> > >> >> What does it cost for an rv6a? >> >> Shemp >> do not archive > > ________________________________ Message 9 _____________________________________ Time: 09:01:09 PM PST US From: "Reginald C. Smith, Sr." Subject: RV-List: Tail Wheel Training Listers', Does anyone know of a good place and/or person available to help me tr ansition from "Nosedrager" to "Taildrager"? I'm due for my BFR and would l ike to use that training to accomplish it. With all the 'Hubbub' about the Nose Wheel Situation, I'd like to have that option; since I'm at that poin t in my 6(A) construction. I'm also considering purchasing a Taildrager, so suggestions are well received and most welcome. Thanks. RC. RV-6(A)? Tail, Wings Looking for Fuselage Want to FLY NOW _________________________________________________________________ Peek-a-boo FREE Tricks & Treats for You! http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us ________________________________ Message 10 ____________________________________ Time: 09:55:28 PM PST US From: "Greg Williams" Subject: Re: RV-List: Needed: Answer; Is Non-TSO Altimeter - Good for IFR? David, Thanks for the reply. As you can tell, I'm not a high time pilot like some lucky folks. I'm just halfway thru my IFR ground school and all I really wanted to do was to get home to our airport after a long VFR flight or to get out early in a kind of foggy day where it is VFR elsewhere. I've got the Blue Mtn EFIS one and a Dynon D10A for "backup", two alternators and a backup battery. The nav-com is TSO'd as is the encoding transponder. My airport has a ILS which works great on my panel. But the missed approach includes a hold at a NDB. Although the EFIS shows the NDB, I don't have a separate ADF radio and kind of short of panel space to put something else in. I agree that I would be very busy if I had to do "real IFR" in a unknown location but all I want to do is to get home to my well known airport. I'll keep working on my IFR and hope some possibility comes up. Thanks again, Greg On Nov 14, 2007 3:23 PM, David Leonard wrote: > Greg, > No one can certify your plane for IFR. It doesn't quiet work like that. > > The 2-year test everyone is taking about here comes in 2 versions. A VFR > Transponder test, and an IFR Static-Transponder test. It is often called > the Pitot-Static test because most shops test the pitot system as well, but > surprisingly there are no performance requirements for the pitot system. So > the test is of the SYSTEM. It includes the static lines, encoder, > altimiter, and transponder. There is no requirement for TSO except for the > transponder. If it passes, it is acceptable to use in IFR flight (if not > altered) for 2 years. > > This does not mean that you AIRCRAFT is certified for IFR flight. Those > requirements depend somewhat on what FAR part you fly under, but it would > mean you also have navigation equipment appropriate for the approach being > flown, an AI, a DG, T&B, all VFR required insturments, and 2-way radio > communication. (and maybe some things I forgot). Those instruments do not > need to be "certified" for IFR, though they should perform up to the > standards of instruments that are TSO'd. > > Even with all that, it does not mean that it is necessarily a good idea to > proceed into IMC. > > Ask yourself the following questions. Would I bet my life that my > altimeter will not develop excessive error or stop functioning? Could I > proceed in IMC with the complete loss of any one of my instruments or > SYSTEMS? Does the type of flying I intend present excessive challenges in > terms of pilot workload? (most RV-s will not remain upright with the hands > off the stick and there is not a lot of room in an RV for charts etc..) > i.e. an RV is a more challenging IFR platform than most spam cans (yet > still very doable when approached right). > > Thats what is really cool about experimental - it is up to you to decided > some of the big questions. > -- > David Leonard > > Turbo Rotary RV-6 N4VY > http://N4VY.RotaryRoster.net > http://RotaryRoster.net > > On Nov 13, 2007 3:40 PM, Greg Williams wrote: > > > So, if I want my -7 blessed for IFR, I take it to an avionics shop > > friendly to Experimentals and ask them to certify the airplane or each > > instrument? > > > > On Nov 13, 2007 3:13 PM, Paul Besing < pbesing@yahoo.com> wrote: > > > > > Good luck with that. As soon as they find out it's "Experimental" > > > some places are sent slamming their doors, throwing away the key, and > > > changing their phone number because they are so afraid of those crazy people > > > who build airplanes in the garages. I was lucky, I'm at an airport that has > > > alot of experimentals, and they are easy to work with. As a matter of fact, > > > my "Non-TSO'd" Rocky Mountain uEncoder was more accurate than most he > > > tests...he was very impressed :-) Oh yeah, and I built that in my garage > > > too, which also gives my altitude to ATC in an IFR environment! Scary! > > > > > > Paul Besing > > > > > > ----- Original Message ---- > > > From: David Leonard > > > To: rv-list@matronics.com > > > Sent: Tuesday, November 13, 2007 8:04:54 AM > > > Subject: Re: RV-List: Needed: Answer; Is Non-TSO Altimeter - Good for > > > IFR? > > > > > > Without question, non-TSO is OK for experimental aircraft. I would > > > consider making the shop show you where it says that a TSO is required to > > > pass the static-system test. > > > > > > I have 2 non-TSO altimiters (Rockymountain and Bluemountain) and they > > > both pass every time. Both are easy to calibrate down to less than 10' > > > error at any altitude. - i.e. they both outperform any TSO steam > > > guage. But that is beside the point. > > > > > > If you google you can find a copy of the instructions for performing > > > the static system test. > > > > > > Dave Leonard > > > > > > On Nov 13, 2007 7:18 AM, wrote: > > > > > > > Help. > > > > > > > > My Glasair III needs its two year IFR certification, i.e., > > > > pitot/static, altimeter, & transponder check. The altimeter (I just found > > > > out) is non-TSO'd. Does anyone have the Regs and/or clarification that says > > > > this is legal for IFR in an experimental aircraft? My local avionics shop > > > > says no, and will not do the test and certification. > > > > > > > > Thank you in advance. > > > > > > > > Jeff > > > > ------------------------------ > > > > ! > > > > > > > > * > > > > > > > > > > > > * > > > > > > > > > > > > > > > > > -- > > > David Leonard > > > > > > Turbo Rotary RV-6 N4VY > > > http://N4VY.RotaryRoster.net > > > http://RotaryRoster.net > > > ------------------------------ > > > Get easy, one-click access to your favorites. > > > > > > * > > > > > > * > > > > > > > > * > > > > * > > > > > > > * > > > * > > ________________________________ Message 11 ____________________________________ Time: 10:32:05 PM PST US From: rv6n@optonline.net Subject: Re: RV-List: Tail Wheel Training I did my tail wheel transition training with Jan Bussell. He owns a 6 and a 6A and is in Okechobee, Fl. I was very happy with Jan and believe it would have been impossible to have flown my RV6 without his expert help. The insurance co. wanted 10 hours in make and model and we did my BFR. Jan's email address is: janjoyce@strato.net Good luck, Bob Bales RV6 flying, 65 hrs do not archive ----- Original Message ----- From: "Reginald C. Smith, Sr." Subject: RV-List: Tail Wheel Training > > Listers', > > Does anyone know of a good place and/or person available to > help me transition from "Nosedrager" to "Taildrager"? I'm due > for my BFR and would like to use that training to accomplish it. > With all the 'Hubbub' about the Nose Wheel Situation, I'd like > to have that option; since I'm at that point in my 6(A) > construction. I'm also considering purchasing a Taildrager, so > suggestions are well received and most welcome. Thanks. > > RC. > > RV-6(A)? Tail, Wings > Looking for Fuselage > Want to FLY NOW > > > _________________________________________________________________ > Peek-a-boo FREE Tricks & Treats for You! > http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.