---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Tue 02/05/08: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:17 AM - Re: Plenum - Van's 360 baffle kit - "finger spacer" (John Ciolino) 2. 05:54 AM - Re: Carpet Security (Tim Bryan) 3. 07:06 AM - Artex 200 to 406 (David Burnham) 4. 08:18 AM - Re: Artex 200 to 406 (steve) 5. 02:03 PM - Williamsburg, Va (zackrv8) 6. 02:11 PM - Oil cooler mount / wedge (Ralph E. Capen) 7. 04:05 PM - Re: Williamsburg, Va (Carl Froehlich) 8. 04:11 PM - Re: Oil cooler mount / wedge (Deems Davis) 9. 05:54 PM - Carpet Security (Emrath) ________________________________ Message 1 _____________________________________ Time: 04:17:06 AM PST US From: "John Ciolino" Subject: Re: RV-List: Plenum - Van's 360 baffle kit - "finger spacer" Ralph, I just finished the baffles myself and I have the Aerosport XP30 also. You are right, you need a nut and bolt and the provided bolt is way too long. I used a -10 but use what fits. I also installed a nutplate on the baffle because I got tired of the the hand gymnastics required to get the nut on and off. My understanding is that the spacer is to move the baffle forward so it does not rub on the rubber engine mount. I needed more that 1/4"-- just shy of 1/2". John Ciolino ----- Original Message ----- From: "Ralph E. Capen" Sent: Monday, February 04, 2008 7:59 AM Subject: RV-List: Plenum - Van's 360 baffle kit - "finger spacer" > > Folks, > > I started working on my baffle kit yesterday as it will be the basis for > my plenum. > > The instructions call for a 1/4" 'finger spacer' on the back side of the > first panel outboard of the centerline to be riveted around (below) a bolt > hole for an AN4-15A bolt. > > My Aerosport built (XP360 I'm fairly sure) IO360B1F6 isn't threaded there > so I know a nut/washer will also e required. Also, even with a 1/4" > spacer, a 15 length bolt will be way too long. > > Anyone else find this? Is 1/4" thick a good size for the spacer? What > length bolt did you use? > > Thanks, > Ralph > > > ________________________________ Message 2 _____________________________________ Time: 05:54:13 AM PST US From: "Tim Bryan" Subject: RE: RV-List: Carpet Security _____ From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Vanremog@aol.com Sent: Monday, February 04, 2008 9:59 PM Subject: Re: RV-List: Carpet Security In a message dated 2/4/2008 7:00:33 P.M. Pacific Standard Time, HCRV6@comcast.net writes: Re Velcro, a word of caution. If you use the self stick kind you can expect it to start shifting and slipping around before long and making a real mess, I'm sure you can guess how I know. Get the Velcro that doesn't have an adhesive backing and glue it down to stay with a good quality, like 3M, contact cement. =========================================== Or Gorilla Glue. [Tim] Yikes!! What out for that stuff it foams and multiplies in quantity by as much as three times. If you use this, be warned. N1GV (RV-6A, Flying 883hrs, O-360-A1A, C/S, Silicon Valley) _____ Who's never won? Biggest Grammy Award surprises of all time on AOL Music. ________________________________ Message 3 _____________________________________ Time: 07:06:59 AM PST US From: "David Burnham" Subject: RV-List: Artex 200 to 406 Has anyone exchanged their Artex 200 for a 406 ELT. Skygeek says you can use the same remote switch and wiring harness. Can anyone help with the wiring diagram. The 200 has 3 wires between unit and switch 406 4wires and they connect to different pins. Regards, Dave Burnham N64FN ________________________________ Message 4 _____________________________________ Time: 08:18:02 AM PST US From: steve Subject: Re: RV-List: Artex 200 to 406 Haven't done a 200 to 406 exchange, only a new install on an Artex ME406. All the Artex installation manuals are here: http://www.artex.net/support-resources/documents.php?folderid=5 Looks like the panel switch is the same, but wiring from the switch to the ELT is different. Steve A RV-6A David Burnham wrote: > Has anyone exchanged their Artex 200 for a 406 ELT. Skygeek says you > can use the same remote switch and wiring harness. Can anyone help > with the wiring diagram. > The 200 has 3 wires between unit and switch 406 4wires and they > connect to different pins. > > Regards, > Dave Burnham > N64FN** ________________________________ Message 5 _____________________________________ Time: 02:03:09 PM PST US Subject: RV-List: Williamsburg, Va From: "zackrv8" I recently completed a trip with several other RV's to KJGG (Williamsburg). They have a great restaurant on the field, but if you want to spend the night and check out the sites with your wife, I highly recommend this place (http://www.innat802.com/). It belongs to my brother-in-law and he told me that he will offer a 10% discount if you tell him you are a pilot. He will also pick you up and drop you off at the airport. No need to rent a car. Zack -------- RV8 #80125 RV10 # 40512 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=162560#162560 ________________________________ Message 6 _____________________________________ Time: 02:11:36 PM PST US From: "Ralph E. Capen" Subject: RV-List: Oil cooler mount / wedge I'm working on my plenum/baffling. I'm starting with Vans baffle kit. I have decided that I would like to mount the oil cooler off the back of the #3 cyl back plate instead of the firewall. I'm also using a Sam James plenum - I'll be contacting them too! How have others done it? I'll even look at firewall mounts - to see if there are any good ones Anyone have plans for the wedge option that I have seen (somewhere)? Thanks, Ralph ________________________________ Message 7 _____________________________________ Time: 04:05:53 PM PST US From: "Carl Froehlich" Subject: RE: RV-List: Williamsburg, Va I can vouch for the B&B. Great place. Carl -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of zackrv8 Sent: Tuesday, February 05, 2008 4:59 PM Subject: RV-List: Williamsburg, Va I recently completed a trip with several other RV's to KJGG (Williamsburg). They have a great restaurant on the field, but if you want to spend the night and check out the sites with your wife, I highly recommend this place (http://www.innat802.com/). It belongs to my brother-in-law and he told me that he will offer a 10% discount if you tell him you are a pilot. He will also pick you up and drop you off at the airport. No need to rent a car. Zack -------- RV8 #80125 RV10 # 40512 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=162560#162560 ________________________________ Message 8 _____________________________________ Time: 04:11:59 PM PST US From: Deems Davis Subject: Re: RV-List: Oil cooler mount / wedge Robby Attaway http://www.attawayair.com/index.html had a mount that would attach to the aft baffle, don't know if it will work with the SJ plenum, as the plenum is placed pretty low wrt to the baffle. It's not listed on his site, but If you call him he will let you know about it. Deems Davis # 406 'Its all done....Its just not put together' http://deemsrv10.com/ Ralph E. Capen wrote: > > I'm working on my plenum/baffling. I'm starting with Vans baffle kit. I have decided that I would like to mount the oil cooler off the back of the #3 cyl back plate instead of the firewall. > > I'm also using a Sam James plenum - I'll be contacting them too! > > How have others done it? I'll even look at firewall mounts - to see if there are any good ones > > Anyone have plans for the wedge option that I have seen (somewhere)? > Thanks, > Ralph > > > ________________________________ Message 9 _____________________________________ Time: 05:54:26 PM PST US From: "Emrath" Subject: RV-List: Carpet Security I seem to recall that Bob Nuckolls of Aeroelectric-list recommends heating the self sticking side of Velcro prior to attaching and you will have a horible time getting it off later if needed! Marty Time: 08:03:46 PM PST US From: Vanremog@aol.com Subject: Re: RV-List: Carpet Security In a message dated 2/4/2008 7:00:33 P.M. Pacific Standard Time, HCRV6@comcast.net writes: Re Velcro, a word of caution. If you use the self stick kind you can expect it to start shifting and slipping around before long and making a real mess, I'm sure you can guess how I know. Get the Velcro that doesn't have an adhesive backing and glue it down to stay with a good quality, like 3M, contact cement. ========================================== Or Gorilla Glue. N1GV (RV-6A, Flying 883hrs, O-360-A1A, C/S, Silicon Valley) Marty ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.