Today's Message Index:
----------------------
1. 10:27 PM - Re: Current crop of pitot tubes (Ed Holyoke)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Current crop of pitot tubes |
Another EIFS which hasn't gotten much attention is the MGL
Enigma/Odyssey. It appears that it can be set up to derive AOA from
either drilled wing ports or a 2 hole pitot/AOA probe like Dynon's.
http://www.mglavionics.com/html/odyssey.html
Pax,
Ed Holyoke
Kevin Horton wrote:
> You need to match the pressure source (i.e. the holes, either on the
> pitot tube, or the wing) to the sensor. So, if you want the Dynon
> pitot, then you need to use their EFIS to calculate the AOA. If you
> want the AOA Sport system, you need to put the holes where they tell
> you to.
>
> This is not a plug and play system, where you can mix and match
> pressure source and sensor, as there are no agreed upon standards for
> the pressure source.
>
> Kevin Horton
>
> On 25 Apr 2008, at 18:23, Corey Crawford wrote:
>
>> Does anyone know if the Dynon pitot with angle-of-attack would
>> connect to/work with an AOA Sport? I'd love to avoid drilling any
>> holes in my QB wings ..
>>
>> --
>> Corey Crawford
>> RV-7A - Denver, CO
>>
>>
>> On Fri, Apr 25, 2008 at 10:57 AM, William Gill <wgill10@comcast.net
>> <mailto:wgill10@comcast.net>> wrote:
>>
>> <wgill10@comcast.net <mailto:wgill10@comcast.net>>
>>
>> The chrome Gretz mount with the Dynon heated pitot or Dynon's heated
>> pitot with angle-of-attack looks very nice...and works great.
>>
>> Bill
>> RV-7
>>
> *
>
>
> *
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|