RV-List Digest Archive

Sat 06/28/08


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 08:11 AM - Fuel tank sealant available (JFLEISC@aol.com)
     2. 10:36 AM - Re: Fuel tank sealant available (Charlie England)
     3. 03:53 PM - Re: Fuel tank sealant available (Doug Gray)
     4. 05:45 PM - Re: Fuel tank sealant available (JFLEISC@AOL.COM)
     5. 06:47 PM - RV8 tail and mostly unfinished wings for sale (Will Allen)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:11:18 AM PST US
    From: JFLEISC@aol.com
    Subject: Fuel tank sealant available
    All, I finished sealing my fuel tanks and since there is a 2 week waiting time after ordering the sealant I made sure I bought much more than I needed so as not to run out during the job. It went much smoother than anticipated and I have some left over. I have 2 unopened factory sealed pints (one RV-4 tank took me one pint) of PPG P/S 890 B-2 available with a manufacturing date of 6/08. It states a 9 month shelf life. This is the "paste type" and I applied it with a stiff brush. It has an application time of 2 hours (I mixed small batches). After much research including what I learned from this group I found this to be one of the few 'ProSeal' products to specifically list in it's tech sheet that it has the same resistance to alcohol as fuel (I like the option to run Mogas) (see the link below for the PPG tech sheet). I understand that many of the newly formulated sealants are alcohol resistant also however those that I read the tech sheets of made no specific mention of alcohol. It cost me $55 a pint and I will sell to whoever may be interested for $55 for the 2 pints plus shipping. If interested email me at _jfleisc@aol.com_ (mailto:jfleisc@aol.com) . Jim _http://buyat.ppg.com/REP_aerospace_files/Sealants/890b.pdf_ (http://buyat.ppg.com/REP_aerospace_files/Sealants/890b.pdf) **************Gas prices getting you down? Search AOL Autos for fuel-efficient used cars. (http://autos.aol.com/used?ncid=aolaut00050000000007)


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:36:24 AM PST US
    From: Charlie England <ceengland@bellsouth.net>
    Subject: Re: Fuel tank sealant available
    JFLEISC@aol.com wrote: > All, I finished sealing my fuel tanks and since there is a 2 week > waiting time after ordering the sealant I made sure I bought much more > than I needed so as not to run out during the job. It went much > smoother than anticipated and I have some left over. I have 2 unopened > factory sealed pints (one RV-4 tank took me one pint) of PPG P/S 890 > B-2 available with a manufacturing date of 6/08. It states a 9 month > shelf life. This is the "paste type" and I applied it with a stiff > brush. It has an application time of 2 hours (I mixed small batches). > After much research including what I learned from this group I found > this to be one of the few 'ProSeal' products to specifically list in > it's tech sheet that it has the same resistance to alcohol as fuel (I > like the option to run Mogas) (see the link below for the PPG tech > sheet). I understand that many of the newly formulated sealants are > alcohol resistant also however those that I read the tech sheets of > made no specific mention of alcohol. It cost me $55 a pint and I will > sell to whoever may be interested for $55 for the 2 pints plus > shipping. If interested email me at jfleisc@aol.com > <mailto:jfleisc@aol.com>. > > Jim > > http://buyat.ppg.com/REP_aerospace_files/Sealants/890b.pdf Actually, the link you sent says: Charlie


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:53:36 PM PST US
    Subject: Re: Fuel tank sealant available
    From: Doug Gray <dgra1233@bigpond.net.au>
    On Sat, 2008-06-28 at 11:07 -0400, JFLEISC@aol.com wrote: > I understand that many of the newly formulated sealants are alcohol > resistant also however those that I read the tech sheets of made no > specific mention of alcohol. This 'manganese dioxide cured polysulfide compound' is good ol' Proseal. I believe DeSoto and it's previous incarnation (whose name escapes me for the moment) was the original manufacturer of the product. Like me the folk in these companies have never changed jobs but have worked for a string of different corporations. Doug Gray


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:45:00 PM PST US
    From: JFLEISC@AOL.COM
    Subject: Re: Fuel tank sealant available
    In a message dated 6/28/2008 6:55:12 P.M. Eastern Daylight Time, dgra1233@bigpond.net.au writes: This 'manganese dioxide cured polysulfide compound' is good ol' Proseal. I believe DeSoto and it's previous incarnation (whose name escapes me for the moment) was the original manufacturer of the product. "The product"? I went to their site and under 'sealants' there are quite a few "products", all going by the name "ProSeal' (or P/S) with different suffix numbers depending on the characteristics. Its not the same number "proseal" that, for instance, Aircraft Spruce sells. Which one is the 'good ol' stuff? **************Gas prices getting you down? Search AOL Autos for fuel-efficient used cars. (http://autos.aol.com/used?ncid=aolaut00050000000007)


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:47:10 PM PST US
    From: "Will Allen" <will@flipsideaerobatics.com>
    Subject: RV8 tail and mostly unfinished wings for sale
    RV8 completed tail and 15% completed wings for sale. Hoping for kit price or best reasonable offer. Usual story, no time to finish cause I=92m flying aerobatics too much ;) can give more info and pics on request. Oh, I=92m in the Seattle area. Thanks, Will Allen (425) 785-9922 will@flipsideaerobatics.com www.flipsideaerobatics.com Checked by AVG. 6/28/2008 7:00 AM




    Other Matronics Email List Services

  • Post A New Message
  •   rv-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv-list
  • Browse RV-List Digests
  •   http://www.matronics.com/digest/rv-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --