---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Fri 01/09/09: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:03 AM - Spinner Template (Valovich, Paul) 2. 09:33 AM - Re: Spinner Template (Dale Ensing) 3. 06:17 PM - Re: Spinner Template (Bill Schlatterer) ________________________________ Message 1 _____________________________________ Time: 09:03:33 AM PST US From: "Valovich, Paul" Subject: RV-List: Spinner Template I have seen numerous references to a constant speed spinner cut-out templat e - supposedly located somewhere on the web. I have searched in all the usual places in an attempt to locate it - with z ero success. Can anyone provide the link? I have a new Hartzell prop. The -8A plans provide clear direction for drawing one by hand, but I want a cross-check on my efforts. Seems to me that random mass distribution error s introduced during the prop/spinner mounting process should nearly cancel out or have minimal effect if one is very careful. However, this is one are a where I want to do everything possible to eliminate vibration. Paul Valovich RV-8A N192NM Reserved (again) ________________________________ Message 2 _____________________________________ Time: 09:33:20 AM PST US From: "Dale Ensing" Subject: Re: RV-List: Spinner Template Paul, I have a drawing/tracing of the actual finished cut-outs in my Van's 6A spi nner for a Hartzell prop. Can fax to you if you would like. Dale Ensing ----- Original Message ----- From: Valovich, Paul To: rv-list@matronics.com Sent: Friday, January 09, 2009 11:59 AM Subject: RV-List: Spinner Template I have seen numerous references to a constant speed spinner cut-out templ ate - supposedly located somewhere on the web. I have searched in all the usual places in an attempt to locate it - with zero success. Can anyone provide the link? I have a new Hartzell prop. The -8A plans provide clear direction for drawing one by hand, but I want a cross-check on my efforts. Seems to me that random mass distribution err ors introduced during the prop/spinner mounting process should nearly cance l out or have minimal effect if one is very careful. However, this is one a rea where I want to do everything possible to eliminate vibration. Paul Valovich RV-8A N192NM Reserved (again) ________________________________ Message 3 _____________________________________ Time: 06:17:24 PM PST US From: "Bill Schlatterer" Subject: RE: RV-List: Spinner Template Not sure if this is the one you want but it is for the blended AF Hartzell on my O-360 A1A. Others available on the Hartzell site. Hope this helps! Bill S 7a finishing _____ From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Valovich, Paul Sent: Friday, January 09, 2009 11:00 AM Subject: RV-List: Spinner Template I have seen numerous references to a constant speed spinner cut-out template - supposedly located somewhere on the web. I have searched in all the usual places in an attempt to locate it - with zero success. Can anyone provide the link? I have a new Hartzell prop. The -8A plans provide clear direction for drawing one by hand, but I want a cross-check on my efforts. Seems to me that random mass distribution errors introduced during the prop/spinner mounting process should nearly cancel out or have minimal effect if one is very careful. However, this is one area where I want to do everything possible to eliminate vibration. Paul Valovich RV-8A N192NM Reserved (again) ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.