Today's Message Index:
----------------------
1. 12:03 PM - RV-6 / 6a kits for sale (Scott Kuebler)
2. 09:12 PM - Dwg 4 Error ( Left Elevator Assy - RV7 & RV8) (Garey Wittich)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RV-6 / 6a kits for sale |
RV-6 / 6a kits for sale.
Empennage: Complete except for fiberglass tips. Includes electric elevator
trim kit. All parts are alodined and primed with Marhyde primer.
Wings & Phlogiston Spar: Both skeletons fully assembled. Top skins
riveted. Both tanks are complete and sealed. Flaps and ailerons complete,
but not fitted. Includes electric aileron trim kit. All parts are alodined
and primed with Deft epoxy primer (Mil-P-23377G).
Both kits are the pre-punched versions purchased in 1997 & 1998 by myself.
Construction is excellent. Preview plans and Orndorff videos are included
for both kits.
Detailed photos are available upon request.
Must sell. The first $3500 takes it all. Buyer arranges transportation.
If all items were purchased separately the price would be more than $6500
for the unassembled kits.
Regards,
Scott Kuebler
Buffalo, NY
716-510-0318- cell
scottam65@gmail.com
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Dwg 4 Error ( Left Elevator Assy - RV7 & RV8) |
Possibly wrong dimension shown: Lower right corner of Dwg 4 "Electric Trim Assy"
shows a dimension of - 3/8" Forward edge of EET-602B-L to forward edge of E-616PP:
The exposed "lip" on the E-615PP (Trim Access Plate) after being riveting
it to the Elev Skin is 3/8" wide. Thus the 3/8" dimension shown should be more
like 1/2". I noticed this problem AFTER drilling, dimpling and clecoing the
EET-602B-L & R to the Trim Cover Plate and trying to screw down the Trim Access
Plate (interference between the E615PP Reinforcing Plate and the EET-602B-L
& R occurred). Hope this helps somebody !!
Found the EET-602B-L & R were labeled wrong on the Parts = L should be R and R
should be L
Guess this ALL part of the learning curve - sure is frustrating.
Garey Santa Monica, CA
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|