---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Thu 01/15/09: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:03 PM - RV-6 / 6a kits for sale (Scott Kuebler) 2. 09:12 PM - Dwg 4 Error ( Left Elevator Assy - RV7 & RV8) (Garey Wittich) ________________________________ Message 1 _____________________________________ Time: 12:03:09 PM PST US Subject: RV-List: RV-6 / 6a kits for sale From: Scott Kuebler RV-6 / 6a kits for sale. Empennage: Complete except for fiberglass tips. Includes electric elevator trim kit. All parts are alodined and primed with Marhyde primer. Wings & Phlogiston Spar: Both skeletons fully assembled. Top skins riveted. Both tanks are complete and sealed. Flaps and ailerons complete, but not fitted. Includes electric aileron trim kit. All parts are alodined and primed with Deft epoxy primer (Mil-P-23377G). Both kits are the pre-punched versions purchased in 1997 & 1998 by myself. Construction is excellent. Preview plans and Orndorff videos are included for both kits. Detailed photos are available upon request. Must sell. The first $3500 takes it all. Buyer arranges transportation. If all items were purchased separately the price would be more than $6500 for the unassembled kits. Regards, Scott Kuebler Buffalo, NY 716-510-0318- cell scottam65@gmail.com ________________________________ Message 2 _____________________________________ Time: 09:12:09 PM PST US From: Garey Wittich Subject: RV-List: Dwg 4 Error ( Left Elevator Assy - RV7 & RV8) Possibly wrong dimension shown: Lower right corner of Dwg 4 "Electric Trim Assy" shows a dimension of - 3/8" Forward edge of EET-602B-L to forward edge of E-616PP: The exposed "lip" on the E-615PP (Trim Access Plate) after being riveting it to the Elev Skin is 3/8" wide. Thus the 3/8" dimension shown should be more like 1/2". I noticed this problem AFTER drilling, dimpling and clecoing the EET-602B-L & R to the Trim Cover Plate and trying to screw down the Trim Access Plate (interference between the E615PP Reinforcing Plate and the EET-602B-L & R occurred). Hope this helps somebody !! Found the EET-602B-L & R were labeled wrong on the Parts = L should be R and R should be L Guess this ALL part of the learning curve - sure is frustrating. Garey Santa Monica, CA ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.