Today's Message Index:
----------------------
1. 06:32 AM - firewall insulation (Frazier, Vincent A)
2. 01:42 PM - Re: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL (Jerry Grimmonpre)
3. 05:20 PM - Re: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL (Jerry Grimmonpre)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | firewall insulation |
> What's the common notion on carpeting the cabin side of the firewall?
I
> often see aluminium foil backed insulation on the backside of
firewalls,
> but I'm not sure I've seen carpet. Cars have it, but what about
aircraft?
>
> Matt
I wouldn't use carpet. Too heavy and susceptible to serious moisture
problems if it gets wet, mold, mildew, and ridiculous weight gain. And
it isn't meant to be a fire protection at all.
We are using a closed cell, self adhesive, black foam that meets FAR
burn specs on the cabin side of the firewall. It's not on the web store
yet, but will soon be. We also have a non-fire rated, but otherwise
similar foam on the store right now. Install and seal the edges with
RTV (just in case the adhesive weakens) and you've got a nice tidy
installation.
On the forward side of the firewall we use a ceramic fabric, foil faced,
also self adhesive that looks great and is very user friendly and
inexpensive. It's rated for 1100 deg (foil) but the ceramic will take
much more. Of course, you need to seal down the edges with silicone
RTV, Proseal, foil tape, etc. While no one can claim complete fire
resistance for any material, this stuff will go a LOOOONG way towards
keeping your feet cool under normal ops, and give extra time if you do
have a fire.
Thanks,
Vince Frazier
www.flyboyaccessories.com
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM |
THE INSTALL MANUAL
Thanks for sharing pin-outs for the MX11 ... Jerry
do not archive
----- Original Message -----
From: A. J. Mendes Pereira
To: rv-list@matronics.com
Sent: Sunday, May 17, 2009 5:52 AM
Subject: Re: RV-List: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an
EXTRACT FROM THE INSTALL MANUAL
Here's the 11's pin-out; 'hope it helps...
Take care
AJ
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM |
THE INSTALL MANUAL
AJ
Thanks for sharing pin-outs for the MX11 ... Jerry
do not archive
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|