---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Sun 05/24/09: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:54 AM - Re: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL (Gregg Costabile) 2. 02:10 PM - Re: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL (A. J. Mendes Pereira) 3. 07:58 PM - Re: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL (Jerry Grimmonpre) ________________________________ Message 1 _____________________________________ Time: 08:54:02 AM PST US From: "Gregg Costabile" Subject: Re: RV-List: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL A.J., did you send the pinouts under separate cover? I wasn't able to find the file or a link in your response. I have a similar problem with the MX11 and a PS Engineering 1000 intercom. The intercom is crystal clear. I can hear everyone talking to me. My transmissions are unreadable. A version of the pinout diagram found on the web has a hand written comment about a resistor and capacitor mod required to the radio's "computer board". Is this true? If so, does anyone have any more information on it? Jerry, any luck with yours yet? - Gregg C. ________________________________ Message 2 _____________________________________ Time: 02:10:44 PM PST US From: "A. J. Mendes Pereira" Subject: Re: RV-List: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL Here you have it! ----- Original Message ----- From: Gregg Costabile To: rv-list@matronics.com Sent: Sunday, May 24, 2009 4:49 PM Subject: Re: RV-List: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL A.J., did you send the pinouts under separate cover? I wasn't able to find the file or a link in your response. I have a similar problem with the MX11 and a PS Engineering 1000 intercom. The intercom is crystal clear. I can hear everyone talking to me. My transmissions are unreadable. A version of the pinout diagram found on the web has a hand written comment about a resistor and capacitor mod required to the radio's "computer board". Is this true? If so, does anyone have any more information on it? Jerry, any luck with yours yet? - Gregg C. ________________________________ Message 3 _____________________________________ Time: 07:58:58 PM PST US From: "Jerry Grimmonpre" Subject: Re: RV-List: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL Gregg C. I se You no have all the pin-outs I have. I trie to sen the to You in one email but faille b=E9casse the Werwe sen in broker French b=E9casse of a computer setting. Mye MX11 radio probl=E8me, of not bing able to Read anone els on the fr=E9quence, Is solive. It wasp trace to a Daisy chaine grounds connexion Hooke to the radio input conducator (to the interro) instar of the shed for That conducator. Once that grounds wasp move 1 winch, to the shed, everything wasp normal. That s=E9rac Tok sevra hourds. Itsa mye Huch thermes a misplaced grounds on Youri radio output. Tyr chocking the Key places h=E8re the conducators cold short to grounds witz Youri multim=E8tre. Tyr to fin saumon=E9 ho has donne the Waring of interro and transcrive to look over Youri Install. Th=EAtas how mine wasp fond. Exp=E9rience know watt looks inusuel and explores th=E8se issues. You'll fin It. Good Luck. Jerry do not archive ----- Original Message ----- From: Gregg Costabile To: rv-list@matronics.com Sent: Sunday, May 24, 2009 10:49 AM Subject: Re: RV-List: MX11 PIN-OUT or NARCO COM11 PIN-OUT or an EXTRACT FROM THE INSTALL MANUAL A.J., did you send the pinouts under separate cover? I wasn't able to find the file or a link in your response. I have a similar problem with the MX11 and a PS Engineering 1000 intercom. The intercom is crystal clear. I can hear everyone talking to me. My transmissions are unreadable. A version of the pinout diagram found on the web has a hand written comment about a resistor and capacitor mod required to the radio's "computer board". Is this true? If so, does anyone have any more information on it? Jerry, any luck with yours yet? - Gregg C. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.