---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Sun 06/14/09: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:18 AM - Re: lubricating rod end bearings (Kelly McMullen) 2. 09:23 AM - RV-4 FOR SALE, Seattle Area (Don Diehl) 3. 10:10 AM - Re: RV-4 FOR SALE, Seattle Area: Anyone interested in a partnership? (Henry) 4. 10:54 AM - Conditional inspection blurb (James H Nelson) 5. 11:53 AM - Re: Conditional inspection blurb (passpat@aol.com) 6. 01:33 PM - Re: Conditional inspection blurb (James H Nelson) 7. 03:27 PM - Re: Conditional inspection blurb (Bobby Hester) 8. 08:52 PM - Bolt Hole Clearance - Elevator Horn (Garey Wittich) ________________________________ Message 1 _____________________________________ Time: 06:18:59 AM PST US From: Kelly McMullen Subject: Re: RV-List: lubricating rod end bearings Mooney uses rod ends for all flight controls and specifies TriFlow for lubing all rod ends, every 100 hours/annually. thomas sargent wrote: > > What sort of lubricant should be used on the rod end bearings and the > similar bearings used on the ailerons and elevator? I'm doing final > assembly on a 6A and most of them needed lube pretty bad - they've been > sitting for several years in the garage. Light oil works well, but I > suspect it will collect dust. > -- > Tom Sargent, RV-6A, final assembly. > > > > > ________________________________ Message 2 _____________________________________ Time: 09:23:52 AM PST US From: Don Diehl Subject: RV-List: RV-4 FOR SALE, Seattle Area 1986. O-320E2D, 150 hp, 766 SMOH and TTAF 430 TT on all new wiring and plumbing. Ted Hendrickson prop, Landoll balancer. Dynon D10A w/ AOA & remote compass. David Clark headsets w/ Headsets Inc ANR. Whelan 3in 1 strobe/position/rear wingtip lights. Medical problems force sale. $38,000 cash, no trades. < diehldon@comcast.net > for details and more photos. ________________________________ Message 3 _____________________________________ Time: 10:10:27 AM PST US From: Henry Subject: Re: RV-List: RV-4 FOR SALE, Seattle Area: Anyone interested in a partnership? Would there be any interest in a two or three way partnership in this plane with other Seattle area pilots? Henry Hochberg Don Diehl wrote: > > 1986. O-320E2D, 150 hp, 766 SMOH and TTAF > 430 TT on all new wiring and plumbing. > Ted Hendrickson prop, Landoll balancer. > Dynon D10A w/ AOA & remote compass. > David Clark headsets w/ Headsets Inc ANR. > Whelan 3in 1 strobe/position/rear wingtip lights. > Medical problems force sale. > $38,000 cash, no trades. > < diehldon@comcast.net > for details and more photos. > > ________________________________ Message 4 _____________________________________ Time: 10:54:39 AM PST US Subject: RV-List: Conditional inspection blurb From: James H Nelson I have just finished my first conditional inspection and I have mis placed the blurb tht you put in the log books. Would someone e-mail me the sayings that are necessary to put this back into the air. Jim ____________________________________________________________ Make the right decisions about your inheritance. Click here for more information. http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTFQPHh6vWU0mOtemYd9Maaj323HfSk9s1IikVHdFII7lHgoYNzNz6/ ________________________________ Message 5 _____________________________________ Time: 11:53:26 AM PST US Subject: Re: RV-List: Conditional inspection blurb From: passpat@aol.com "I certify that this aircraft has been inspected on [insert date] in accordance with the scope and detail of appendix D to part 43, and was found to be in a condition for safe operation." The entry will include the aircraft's total time-in-service, and the name, structuresignature, certificate number, and type of certificate held by the person performing the inspection. Hope this Helps Pat Patterson FAA-AB-DAR -----Original Message----- From: James H Nelson Sent: Sun, Jun 14, 2009 1:58 pm Subject: RV-List: Conditional inspection blurb I have just finished my first conditional inspection and I have mis placed the blurb tht you put in the log books. Would someone e-mail me the sayings that are necessary to put this back into the air. Jim ____________________________________________________________ Make the right decisions about your inheritance. Click here for more information. http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTFQPHh6vWU0mOtemYd9Maaj323HfSk9s1IikVHdFII7lHgoYNzNz6/ ________________________________ Message 6 _____________________________________ Time: 01:33:35 PM PST US Subject: Re: RV-List: Conditional inspection blurb From: James H Nelson Many thanks Pat. Jim ____________________________________________________________ Make the most out of every dollar. Click here to find websites and services to help invest wisely. http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTFOGffyFjeNB01fmY6IlL8gf3lxuuXkVMLpZmFvATbd6Et9Zy5Q44/ ________________________________ Message 7 _____________________________________ Time: 03:27:50 PM PST US From: Bobby Hester Subject: Re: RV-List: Conditional inspection blurb It is also listed in your Operating Limitations which you received with your Airworthiness Certificate, both of which are in your airplane or should be. Bobby Hester A&P Mech., RV builder and flyer and all around nice guy ;-) passpat@aol.com wrote: > *"I certify that this aircraft has been inspected on [insert date] in > accordance with the scope and detail of appendix D to part 43, and was > found to be in a condition for safe operation."* The entry will > include the aircraft's total time-in-service, and the name, > structuresignature, certificate number, and type of certificate held > by the person performing the inspection. > > Hope this Helps > Pat Patterson FAA-AB-DAR > > > -----Original Message----- > From: James H Nelson > To: RV-list@matronics.com > Sent: Sun, Jun 14, 2009 1:58 pm > Subject: RV-List: Conditional inspection blurb > > > I have just finished my first conditional inspection and I have mis > placed the blurb tht you put in the log books. Would someone e-mail me > the sayings that are necessary to put this back into the air. > > Jim > ____________________________________________________________ > Make the right decisions about your inheritance. Click here for more > information. > http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTFQPHh6vWU0mOtemYd9Maaj323HfSk9s1IikVHdFII7lHgoYNzNz6/ > > > * > > > * ________________________________ Message 8 _____________________________________ Time: 08:52:10 PM PST US From: Garey Wittich Subject: RV-List: Bolt Hole Clearance - Elevator Horn REF: -Regarding the 1/4 inch bolt holes in the Elevator Control Horns, ab out which the Left & Right Elevator Horns rotate on the center Hinge Bearin g fastened to the center of the Horiz Stabilizer. After drilling these 1/4 inch diameter holes (for the AN4 Bolt), these hole s are too close to the weld fillet that welds the torque tube to the perpen dicular part of the Horn. -The weld fillets on my L & R Horns go ALL the way around the Tube. Thus the AN4 Bolt HEAD and corresponding Nut HEAD will come in contact with the "weld fillet" BEFORE they are tightened. -- - After reading the "Archieves" for possible solutions and some of my own thoughts it seems the options are (looking for the BEST Option): 1) Die Grind the weld fillet in the area where the Bolt and Nut heads will be, then spot prime with Zinc Chromate. 2) -Grind the weld fillet where the Nut Head will be and then use a reduc ed size Nut (MS21042-4) that has a smaller diameter than the -one supplie d by Vans. 3) -Use regular AN960 Washers and "contour them" to fit over the weld fil let so Bolt Head and Nut fit snug against them. -(Will need a longer Bolt than supplied by Vans.) 4) -Make a "thick" washer out of stainless steel (i.e. 1/8" thick) and "c ontour it" to fit over the weld fillets; thus the Bolt and Nut heads have a flat surface to tighten against. -Again a longer Bolt will be required. -<----- Seems the BEST approach to me. - Any subtle issues involved ??? How did YOU handle this situation ??????? Appreciate your comments !!! Thanks, - Garey Wittich - Santa Monica, CA=0A=0A=0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.