---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Sat 11/07/09: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:24 AM - Please Make A Contribution To Support Your Lists (Matt Dralle) 1. 04:10 AM - Re: Air in fuel lines (Jim Fogarty, Lakes & Leisure Realty, Inc.) 2. 10:43 AM - Re: Apollo GX-60 with a Dynon?? (Mike Robertson) 3. 10:54 AM - Re: Apollo GX-60 with a Dynon?? (Mark Swaney) 4. 01:18 PM - shippers (Linn Walters) 5. 08:58 PM - Re: Apollo GX-60 with a Dynon?? (Charlie England) 6. 09:10 PM - Re: Apollo GX-60 with a Dynon?? (Kelly McMullen) ________________________________ Message 0 _____________________________________ Time: 12:24:04 AM PST US From: Matt Dralle Subject: RV-List: Please Make A Contribution To Support Your Lists Dear Listers, There is no advertising income to support the Matronics Email Lists and Forums. The operation is supported 100% by your personal Contributions during the November Fund Raiser. Please make your Contribution today to support the continued operation and upgrade of these services. You can pick up a really nice gift for making your Contribution too! You may use a Credit Card or Paypal at the Matronics Contribution Site here: http://www.matronics.com/contribution or, you can send a personal check to the following address: Matronics / Matt Dralle PO Box 347 Livermore, CA 94551-0347 Thank you in advance for your generous support! Matt Dralle Matronics Email List and Forum Administrator ________________________________ Message 1 _____________________________________ Time: 04:10:46 AM PST US From: "Jim Fogarty, Lakes & Leisure Realty, Inc." Subject: Re: RV-List: Air in fuel lines Dean, For the record I know nothing about engines, however, sometime in the last month I read about this type of problem online. If you have a sniffle valve, check and make sure it is tight and working correctly. The valve could be shot or loose. Reduced pressure inside the manifold causes the ball to be sucked up to close the valve when the engine is running, but it drops down and lets the fuel drip out when the engine is shut down. Jim RV9a building ----- Original Message ----- From: "Linn Walters" Sent: Friday, November 06, 2009 10:04 PM Subject: Re: RV-List: Air in fuel lines > > I had a similar problem in my O-360 Pitts. Found the problem accidentally > ..... the rudder pedal was rubbing on the hard aluminum fuel line and > finally rubbed a hole in it. As long as the rudder pedal was over the > hole .... the engine ran fine. If the hole was uncovered, it really ran > rough .... and wouldn't develop enough power to stay in the air. Fuel > (mogas) was leaking out while the airplane sat, but very slowly and > evaporated ..... and I never smelled anything unusual. I doubt that the > valve is your culprit .... I've had them leak just a little but could > smell it ..... but no other bad effects. > Linn > do not archive > > DEAN PSIROPOULOS wrote: >> >> >> Hi all: >> >> Been having a lot of trouble with a rough idle problem on my Fuel >> Injected >> 0-360 parallel valve engine. I've been going through several tests >> trying >> to locate the source of the problem but so far no joy. One suggestion >> that >> I have received concerns air getting into the fuel lines. It seems a >> little >> far fetched that air could get in through a fitting that is not leaking >> fuel >> but I'm running out of ideas so I'll go through and tighten all my >> fittings >> to see if that helps. >> >> But, that leaves one other possibility and that's air getting in through >> the >> fuel selector valve. I'm using the Van's fuel selector that came with my >> RV-6 kit. It sat in its little brown bag on the shelf in my shop for >> several >> years before it got used but seems to working fine. It's not hard to move >> the selector and its not leaking, at least externally. Anyone experience >> leaking of this valve or any issue with that might let air >> into the fuel lines through it? Any ideas on how I might test the valve >> to >> see if it's leaking air into the system? I'm using the Van's high >> pressure pump setup that puts the pump ahead of the >> selector valve so there will be some suction at the valve. I'm running >> out >> of ideas and thinking about switching to a carb. Hate to do that but >> can't >> find anything wrong after working on it for the last year, maddening. >> Thanks. >> >> Dean Psiropoulos >> RV-6A N197DM >> >> >> >> >> >> > > > ________________________________ Message 2 _____________________________________ Time: 10:43:53 AM PST US From: Mike Robertson Subject: RE: RV-List: Apollo GX-60 with a Dynon?? Charlie=2C We have been flying with a Dynon D-10 and the Apollo GX55 for about 4 years now without any problems at all. Very stable platform for instrument appr oaches. I hope that helps Mike Robertson Das Fed > Date: Fri=2C 6 Nov 2009 19:55:02 -0600 > From: ceengland@bellsouth.net > To: rv-list@matronics.com > Subject: RV-List: Apollo GX-60 with a Dynon?? > > > Has anyone flown with a Dynon EFIS & Apollo GX60 (for IFR)? If so=2C is i t > a reasonable combination? Is the HS34 required or advisable=2C and can th e > Dynon serve as the CDI for approaches? > > I'm not yet instrument rated & *if* I can get around to getting the > rating=2C I'll still be a big enough coward to only use it to get up > through and back down through a layer to good conditions. It's hard to > justify the money for a 430W when there's a good chance I'll never use > its real power=2C & GX60's can be had for a much more tolerable price. > > Thanks for any insight=2C > > Charlie > > > > > =========== =========== =========== =========== > > > _________________________________________________________________ Find the right PC with Windows 7 and Windows Live. http://www.microsoft.com/Windows/pc-scout/laptop-set-criteria.aspx?cbid=w l&filt 0=2C2400=2C10=2C19=2C1=2C3=2C1=2C7=2C50=2C650=2C2=2C12=2C0=2C100 0&cat=1=2C2=2C3=2C4=2C5=2C6&brands=5=2C6=2C7=2C8=2C9=2C10=2C11=2C12=2C1 3=2C14=2C15=2C16&addf=4=2C5=2C9&ocid=PID24727::T:WLMTAGL:ON:WL:en-US:WW L_WIN_evergreen2:112009 ________________________________ Message 3 _____________________________________ Time: 10:54:46 AM PST US From: Mark Swaney Subject: Re: RV-List: Apollo GX-60 with a Dynon?? Charlie, Garmin is in essence no longer going to support for the GX 50/55/50/65 series. They are offering a $2000 trade-in on those units through the end of the year for a 430W, etc. Mark ________________________________ Message 4 _____________________________________ Time: 01:18:05 PM PST US From: Linn Walters Subject: RV-List: shippers There was some chatter awhile back on shippers ..... and a website for cheapest shippers. I saved the information so well I can't find it!!! I have an email out to Partain .... if he's still shipping. Linn do not archive ________________________________ Message 5 _____________________________________ Time: 08:58:28 PM PST US From: Charlie England Subject: Re: RV-List: Apollo GX-60 with a Dynon?? Mark Swaney wrote: > > Charlie, > Garmin is in essence no longer going to support for the GX 50/55/50/65 > series. They are offering a $2000 trade-in on those units through the > end of the year for a 430W, etc. > Mark Hmmm... Thanks to everyone for their answers. This is starting to look like when the surgeon came out & told the family, "The operation was a success, but the patient died." What does the discontinuation of support really mean? No repairs, no IFR legal database updates, etc, or just no new software updates? Thanks, Charlie ________________________________ Message 6 _____________________________________ Time: 09:10:38 PM PST US From: Kelly McMullen Subject: Re: RV-List: Apollo GX-60 with a Dynon?? There are no replacement display panels. When the panel dies the unit is nothing but a spare parts unit. Garmin chose to not acquire any spares beyond what they got when they bought the company. Charlie England wrote: > > Mark Swaney wrote: >> >> Charlie, >> Garmin is in essence no longer going to support for the GX 50/55/50/65 >> series. They are offering a $2000 trade-in on those units through the >> end of the year for a 430W, etc. >> Mark > > Hmmm... > > > Thanks to everyone for their answers. This is starting to look like when > the surgeon came out & told the family, "The operation was a success, > but the patient died." > > What does the discontinuation of support really mean? No repairs, no IFR > legal database updates, etc, or just no new software updates? > > Thanks, > > Charlie > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.