Today's Message Index:
----------------------
1. 10:07 AM - Rain & RV-8 Front Baggage Door (was: Current Status Of Mr. RV-8...) (Matt Dralle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rain & RV-8 Front Baggage Door (was: Current Status Of Mr. |
RV-8...)
Well, it appears to genuine, imitation brass on the outside... ;-) You make a
good point, Bill. I'm pretty sure its probably just steel inside. But it sure
does work perfect at locking the canopy!!
I'm gonna just have to not fly in the rain. I'm really worried about the front
baggage door and the fact that I've got all of the electrical system (VP-200
CU) mounted right under the door. You know, I have to question the wisdom of
cutting a huge hole in the fuselage right on top of the fuselage there. There
might as well just be a big funnel on top to guide the rain in.
What are RV-8 flyers experiences with water coming in the front baggage door?
Matt Dralle
RV-8 #82880 N998RV
http://www.mattsrv8.com Tons Of Construction Photos
Final Assembly...
At 08:33 PM 1/23/2010 Saturday, you wrote:
>Matte,
>
>What are the internals of that lock made from? Being a cabinet lock, if I'm reading
it correctly, it's probably intended for Interior use...meaning it may
rust when wet. You can probably keep it lubricated enough to function but you
may end up with a rust mark down your paint job if you get into some moisture
a few times too many. Have you gone over it with a magnet?
>
>Just curious.
>
>Bill
>-4 finally moving again
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|