Today's Message Index:
----------------------
1. 06:06 AM - Re: RV6 Fuel dipstick (d wntzl)
2. 08:28 PM - Re: RV-6 fuel tank dip stick markings (Bob Mills)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: RV6 Fuel dipstick |
Doug,
-- I made up my dipstick about 6 years ago. I used an acrylic tube for
a cessna, washed / buffed out those markings and added mine. I kept it simp
le - I mark at 5, 10, and 15 gallons. It's quite accurate. If you don't get
what you need, I'll measure mine next time I get to the airport and send t
hem.
DW
--- On Tue, 4/12/11, RV-List Digest Server <rv-list@matronics.com> wrote:
From: RV-List Digest Server <rv-list@matronics.com>
Subject: RV-List Digest: 11 Msgs - 04/11/11
*
========================
---Online Versions of Today's List Digest Archive
========================
Today's complete RV-List Digest can also be found in either of the
two Web Links listed below.- The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation.- The .txt file includes the plain ASCII version
of the RV-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
- - http://www.matronics.com/digest/digestview.php?Style=82701&View
=html&Chapter 11-04-11&Archive=RV
Text Version:
- - http://www.matronics.com/digest/digestview.php?Style=82701&View
=txt&Chapter 11-04-11&Archive=RV
========================
=======================
---EMail Version of Today's List Digest Archive
========================
=======================
- - - - -----------------------------------------------------
--------
- - - - - - - - - - - - ---RV-List Digest Arc
hive
- - - - - - - - - - - - - - - - - - -
---
- - - - - - - - - ---Total Messages Posted Mon 04/1
1/11: 11
- - - - -----------------------------------------------------
--------
Today's Message Index:
----------------------
- ---1. 06:06 AM - RV-6 fuel tank dip stick markings- (Doug Gray)
- ---2. 06:28 AM - Re: RV-6 fuel tank dip stick markings- (ronbur
nett@charter.net)
- ---3. 06:29 AM - Re: RV-6 fuel tank dip stick markings- (Bill B
oyd)
- ---4. 06:37 AM - Re: RV-6 fuel tank dip stick markings- (Dale E
nsing)
- ---5. 06:46 AM - Re: RV-6 fuel tank dip stick markings- (Scott)
- ---6. 07:26 AM - Re: RV-6 fuel tank dip stick markings- (Bobby
Hester)
- ---7. 07:26 AM - Re: RV-6 fuel tank dip stick markings- (John M
orgensen)
- ---8. 07:41 AM - Re: RV-6 fuel tank dip stick markings- (Richar
d Dudley)
- ---9. 11:44 AM - Re: RV-6 fuel tank dip stick markings- (Richar
d Dudley)
- - 10. 02:56 PM - Re: RV-6 fuel tank dip stick markings- (Doug Gray)
- - 11. 03:10 PM - Re: RV-6 fuel tank dip stick markings- (Linn Walte
rs)
________________________________- Message 1- __________________________
___________
Time: 06:06:40 AM PST US
Subject: RV-List: RV-6 fuel tank dip stick markings
From: Doug Gray <dgra1233@bigpond.net.au>
Folks,
Does anyone have a record of the measurements to make a dipstick for a
standard RV-6 fuel tank?
Doug Gray
________________________________- Message 2- __________________________
___________
Time: 06:28:16 AM PST US
From: ronburnett@charter.net
Subject: RE: RV-List: RV-6 fuel tank dip stick markings
I have been working on one with a paint stick and painted ruler, but
haven't finished it yet.
Ron Burnett
RV-6A Subaru owered
M71Greensfield, MO
On Mon, Apr 11, 2011 at 8:02 AM, Doug Gray wrote:
- Folks,
Does anyone have a record of the measurements to make a dipstick for a
standard RV-6 fuel tank?
Doug Gray
________________________________- Message 3- __________________________
___________
Time: 06:29:30 AM PST US
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
From: Bill Boyd <sportav8r@gmail.com>
I could get them to you for a 6A. 6 will be different, of course, due to
pitch attitude at rest.
Bill B
On Mon, Apr 11, 2011 at 9:02 AM, Doug Gray <dgra1233@bigpond.net.au> wrote:
>- Folks,
>
> Does anyone have a record of the measurements to make a dipstick for a
> standard RV-6 fuel tank?
>
> Doug Gray
>
________________________________- Message 4- __________________________
___________
Time: 06:37:53 AM PST US
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
From: Dale Ensing <densing@carolina.rr.com>
I have one but presently out of town. Will send info next week if no else r
esponds.
Dale Ensing
Sent from my iPad
On Apr 11, 2011, at 6:02 AM, Doug Gray <dgra1233@bigpond.net.au> wrote:
> Folks,
>
> Does anyone have a record of the measurements to make a dipstick for a st
andard
RV-6 fuel tank?
>
> Doug Gray
________________________________- Message 5- __________________________
___________
Time: 06:46:58 AM PST US
From: Scott <acepilot@bloomer.net>
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
I use a chunk of 1/4" wooden dowel.- Start with empty tank, add gas in
your desired increments (ie 2 gallons, 5 gallons, etc.) and use a black
sharpie to mark a ring around the stick at each fuel measurement.
>
> On Mon, Apr 11, 2011 at 9:02 AM, Doug Gray <dgra1233@bigpond.net.au
> <mailto:dgra1233@bigpond.net.au>> wrote:
>
>- ---Folks,
>
>- ---Does anyone have a record of the measurements to make a dipst
ick
>- ---for a standard RV-6 fuel tank?
>
>- ---Doug Gray
>
>
> *
>
>
> *
--
________________________________- Message 6- __________________________
___________
Time: 07:26:58 AM PST US
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
From: Bobby Hester <bobbyhester@newwavecomm.net>
Can't help with the measurements but,
I use a FuelHawk
http://www.aircraftspruce.com/catalog/pspages/fuelhawkuniv11.php
Sent from my Verizon iPhone
On Apr 11, 2011, at 8:02 AM, Doug Gray <dgra1233@bigpond.net.au> wrote:
> Folks,
>
> Does anyone have a record of the measurements to make a dipstick for a st
andard
RV-6 fuel tank?
>
> Doug Gray
________________________________- Message 7- __________________________
___________
Time: 07:26:59 AM PST US
From: John Morgensen <john@morgensen.com>
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
I am using a universal clear stick marked 1-14 on an RV4. The number
measured + 5 equals the fuel in the tank. In other words, it measures 10
to 11 when the 16 gal tank is full.
John Morgensen
RV4 - purchased
RV9A - soon
On 4/11/2011 6:02 AM, Doug Gray wrote:
> Folks,
>
> Does anyone have a record of the measurements to make a dipstick for a
> standard RV-6 fuel tank?
>
> Doug Gray
________________________________- Message 8- __________________________
___________
Time: 07:41:15 AM PST US
From: Richard Dudley <rhdudley1@bellsouth.net>
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
Hi Doug,
I did tank calibrations for my RV-6A in the normal attitude on the gear.
It will be somewhat different for at tail dragger because of attitude.
Anyway, I have attached my plot in two different forms: as a jpg file
and as a pdf file. Hope it is of some use to you. It is a simple but
tedious process. At the same time, I calibrated a "Fuel Hawk" dipstick
which I used because of its convenience. It is a hollow plastic tube
with arbitrary markings that you can calibrate for your aircraft. It
works by dipping it in to touch the bottom of the tank holding your
thumb over the top open end to keep the fuel in and reading fuel level
on the calibration marks.
Regards,
Rich Dudley
On 4/11/2011 9:02 AM, Doug Gray wrote:
> Folks,
>
> Does anyone have a record of the measurements to make a dipstick for a
> standard RV-6 fuel tank?
>
> Doug Gray
________________________________- Message 9- __________________________
___________
Time: 11:44:33 AM PST US
From: Richard Dudley <rhdudley1@bellsouth.net>
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
Hi again, Doug,
Since my calibrations are sort of ancient history, I merely scanned old
copies. I have since found the originals and extracted them. They are
better copies. I've attached a pdf file of both the Fuel Hawk and the
inches calibration curves.
Regards,
Rich
On 4/11/2011 9:02 AM, Doug Gray wrote:
> Folks,
>
> Does anyone have a record of the measurements to make a dipstick for a
> standard RV-6 fuel tank?
>
> Doug Gray
________________________________- Message 10- _________________________
___________
Time: 02:56:21 PM PST US
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
From: Doug Gray <dgra1233@bigpond.net.au>
Thanks for the responses everyone.- Dale, I look forward to seeing your
figures.
As noted the 6a figures would differ, but it is good to have the data in
the archive.
The normal fill and mark procedure is rather difficult at our local
airport because the delivery system resets according to its own rules.
Others have tried and given up.- I can if necessary do the procedure
myself.
Doug Gray
On Mon, 2011-04-11 at 23:02 +1000, Doug Gray wrote:
> Folks,
>
> Does anyone have a record of the measurements to make a dipstick for a
> standard RV-6 fuel tank?
>
> Doug Gray
________________________________- Message 11- _________________________
___________
Time: 03:10:42 PM PST US
From: Linn Walters <pitts_pilot@bellsouth.net>
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
You could decant 5 gal gas cans into 5 milk jugs that you've calibrated
by marking the jug for a known gallon.- I've used a 'turkey baster' to
fine tune the contents to the line.- Tedious, yes, but you should only
have to do it once.
Linn
On 4/11/2011 5:52 PM, Doug Gray wrote:
> Thanks for the responses everyone.- Dale, I look forward to seeing
> your figures.
>
> As noted the 6a figures would differ, but it is good to have the data
> in the archive.
>
> The normal fill and mark procedure is rather difficult at our local
> airport because the delivery system resets according to its own
> rules.- Others have tried and given up.- I can if necessary do the
> procedure myself.
>
> Doug Gray
>
> On Mon, 2011-04-11 at 23:02 +1000, Doug Gray wrote:
>> Folks,
>>
>> Does anyone have a record of the measurements to make a dipstick for
>> a standard RV-6 fuel tank?
>>
>> Doug Gray
le, List Admin.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RV-6 fuel tank dip stick markings |
Doug,
I made a 1/2" wood dowel with markings for my -6. It may be slightly
different that standard, as its a Super Six with slightly longer Harmon
Rocket gear legs. However, I have a Flyboys Accessories tailwheel, which
lifts the tail a bit, and I have standard tanks, so it may be close. When I
go out to the hangar tomorrow, I'll take a picture of it next to a ruler and
forward it here and on VAF for ya (saw your post there too), and put the
measurements for each mark in my post as well. Low tech, but another data
point for ya.
Cheers,
Bob Mills
_____
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Doug Gray
Sent: Monday, April 11, 2011 2:53 PM
Subject: Re: RV-List: RV-6 fuel tank dip stick markings
Thanks for the responses everyone. Dale, I look forward to seeing your
figures.
As noted the 6a figures would differ, but it is good to have the data in the
archive.
The normal fill and mark procedure is rather difficult at our local airport
because the delivery system resets according to its own rules. Others have
tried and given up. I can if necessary do the procedure myself.
Doug Gray
On Mon, 2011-04-11 at 23:02 +1000, Doug Gray wrote:
Folks,
Does anyone have a record of the measurements to make a dipstick for a
standard RV-6 fuel tank?
Doug Gray
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|