Today's Message Index:
----------------------
1. 09:57 PM - Re: Exhaust gasket fit. (H. Ivan Haecker)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Exhaust gasket fit. |
I don't know if it's okay, but it's what I have done numerous times with no
ill effects so far. Sure beats messing up the threads of the stud trying to
force the gasket on.
Ivan Haecker -4 1710 hrs. So. Cen. TX
----- Original Message -----
From: "Brian Huffaker" <bifft@xmission.com>
Sent: Monday, September 05, 2011 8:41 PM
Subject: RV-List: Exhaust gasket fit.
>
> Hooking up the exhaust system, using a Vetterman exhaust on a O-360A1D.
> The exhast flange seems to fit the engine just fine, but the gasket won't
> go on. The slotted holes are just a hair too close together. Tried on
> all three of the cylinders that have two studs (one is missing a stud,
> didn't notice until I went to put stuff on tonight). The difference is
> well under 1/16", is it Ok to file that slotted hole just a hair wider?
>
> Brian Huffaker, DSWL (bifft@xmission.com)
> RV-8A 80091 Engine stuff.
> 1/4 Starduster II N23UT flying
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|