Today's Message Index:
----------------------
1. 05:12 AM - Re: ELT antenna location RV8A (Charles Rowbotham)
2. 02:21 PM - Wanted RV 6 Jig (Bill)
3. 06:14 PM - Re: ELT antenna location RV8A (John Clark)
4. 06:22 PM - Re: ELT antenna location RV8A (Matt Dralle)
5. 09:10 PM - Re: Wanted RV 6 Jig (halbenjamin@optonline.net)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | ELT antenna location RV8A |
Hi Rollin=2C
We placed our old 121.5 antenna on the right rear seat bulkhead ( just off
the rear passenger's Right shoulder ) and secured the antenna as the tip be
nt around the top of the bulkhead. Always tested well and never had a probl
em with canopy slider or the rear seat vertical panel. Our ELT transmitter
was located under the baggage shelf.
Chuck & Dave Rowbotham
RV-8A sold
From: noah@acsalaska.net
Subject: RV-List: ELT antenna location RV8A
I am replacing the old 121.5 ELT with a 406 in my RV8A. The old antenna was
under the empennage fairing. The new antenna is longer and doesn=92t fit a
s good in that location and I am thinking there might be a better location.
With the sliding canopy I am scratching my head. Where are others putting
their antenna? Thanks Rollin
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Looking for a unused RV 6 jig in the Houston area. I can pick up.
Sent from my iPad
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: ELT antenna location RV8A |
I mounted mine in the right passenger armrest.
http://www.mykitlog.com/users/display_log.php?user=jackclark&project=211&category=6250&log=131199&row=38
J. Clark
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: ELT antenna location RV8A |
At 09:00 AM 4/5/2012 Thursday, you wrote:
>I am replacing the old 121.5 ELT with a 406 in my RV8A. The old antenna was
under the empennage fairing. The new antenna is longer and doesn=99t
fit as good in that location and I am thinking there might be a better
location. With the sliding canopy I am scratching my head. Where are others
putting their antenna? Thanks Rollin
I have the Ameri-King AK-451 ELT with GPS input on the RV-8 and mounted my
antenna under the fin. Seem to fit well. Attached is a picture.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 870+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer
Mode
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wanted RV 6 Jig |
Hi Bill,
I don't have a jig for you, but I built one for my RV-4. The fact is that they
are not hard to build. I bought some "engineered lumber" and built the thing in
a day. The lumber is quite stable and strong. The jig remained true through
the fuselage construction. After building the fuselage I used the wood for work
benches. Good luck!
Hal Benjamin RV-4
Brookhaven (KHWV), NY
First engine start soon.
----- Original Message -----
From: Bill
Subject: RV-List: Wanted RV 6 Jig
>
> Looking for a unused RV 6 jig in the Houston area. I can pick
> up.
>
> Sent from my iPad
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|