Today's Message Index:
----------------------
1. 07:05 PM - Andair Fuel Caps, New Engraving Products, Updated International Shipping info for all RVers overseas, Kitplanehoses.com, and Secret Squirrel Department (Aircraft Specialty)
2. 07:23 PM - Re: Andair Fuel Caps, New Engraving Products, Updated International Shipping info for all RVers overseas, Kitplanehoses.com, and Secret Squirrel Department (mr.gsun@gmail.com)
3. 07:41 PM - Re: Andair Fuel Caps, New Engraving Products, Updated International Shipping info for all RVers overseas, Kitplanehoses.com, and Secret Squirrel Department (vanremog@aol.com)
4. 07:45 PM - Re: Andair Fuel Caps, New Engraving Products, Updated International Shipping info for all RVers overseas, Kitplanehoses.com, and Secret Squirrel Department (vanremog@aol.com)
5. 08:18 PM - Cork Gaskets For Comant CI122 VHF Antennas (Matt Dralle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Andair Fuel Caps, New Engraving Products, Updated International |
Shipping info for all RVers overseas, Kitplanehoses.com, and Secret Squirrel
Department
Good evening everyone. Hope you all had a great time at Oshkosh. For
those of you who were unable to attend, I am sure you were there in spirit.
We have been busy here at Aircraft Specialty, and wanted to announce a few
things.
1. We are now a US Distributor for Andair Locking Fuel Caps. Andair is
based in England, and makes extremely high quality caps. The best part is
that they are retrofittable into the standard RV flange. This allows you
to retrofit locking caps to your tank without having to make any
modifications, other than to proseal the Andair flange inside the Van's
flange. We also offer fuel cap engraving for the andair caps. The major
advantage here is that since we are a distributor, we are able to engrave
the caps onsite and then ship them out to you. This saves you the hassle
of having to purchase caps and then send them out to be engraved. We are
offering the Andair caps for *$154/set (plain), $194/set (engraved), and
$199/set (engraved with color fill)*. These caps can be found at *
www.aircraftspecialty.com/rvproducts.html*
2. We are also offering polishing of the standard Vans fuel caps at a very
reasonable rate. If you go to *www.aircraftspecialty.com/engraving.html*,
click on the fuel caps, and then click on "FOR INFORMATION ON USHER FUEL
CAP POLISHING". You will see pictures of the difference between the
polished and unpolished caps. This in an option we offer as an addition to
our fuel cap engraving. *The cost is $30/set of two caps.*
3. Finally, we have updated our shipping rates for our international
customers. We ship mostly via the Post Office, and you can expect to
receive your items within 10 business days. Normally it goes quicker, but
that is the maximum that it should take. You no longer have to call us for
an international shipping quote.
4. Thanks to all of you that have purchased hoses from www.kitplanehoses.com.
We appreciate it, and will continue to provide top quality fuel and brake
hoses at very reasonable prices. I have received a lot of positive
feedback about our ordering process, but wanted to open it up to you. If
you have any suggestions on what would make ordering hoses easier or more
convenient, please feel free to let me know. Also, for those of you who
live overseas, this ordering is also available with accurate shipping
quotes at *www.kitplanehoses.com* Feel free to contact me at *
steve@aircraftspecialty.com* with comments.
5. We also wanted to let everyone know that we are currently working on a
few very innovative products that will be reasonably priced and will
greatly enhance your RV. We are always working on innovating new things,
but want to make sure they are tested and perfect before we release them
for sale. As always, if any of you have any ideas on something that you
would absolutely like to have, we are happy to work with builders to
develop new items that might benefit the RV community.
Fly safe and thanks again for all your patronage.
Steve
Aircraft Specialty
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Andair Fuel Caps, New Engraving Products, Updated International |
Shipping info for all RVers overseas, Kitplanehoses.com, and Secret Squirrel
Department
What is available for good looking alternate static port valve?
Greg
On Aug 6, 2012 7:09 PM, "Aircraft Specialty" <aircraftspecialty@gmail.com>
wrote:
> Good evening everyone. Hope you all had a great time at Oshkosh. For
> those of you who were unable to attend, I am sure you were there in spirit.
>
> We have been busy here at Aircraft Specialty, and wanted to announce a few
> things.
>
> 1. We are now a US Distributor for Andair Locking Fuel Caps. Andair is
> based in England, and makes extremely high quality caps. The best part is
> that they are retrofittable into the standard RV flange. This allows you
> to retrofit locking caps to your tank without having to make any
> modifications, other than to proseal the Andair flange inside the Van's
> flange. We also offer fuel cap engraving for the andair caps. The major
> advantage here is that since we are a distributor, we are able to engrave
> the caps onsite and then ship them out to you. This saves you the hassle
> of having to purchase caps and then send them out to be engraved. We are
> offering the Andair caps for *$154/set (plain), $194/set (engraved), and
> $199/set (engraved with color fill)*. These caps can be found at *
> www.aircraftspecialty.com/rvproducts.html*
>
> 2. We are also offering polishing of the standard Vans fuel caps at a very
> reasonable rate. If you go to *www.aircraftspecialty.com/engraving.html*,
> click on the fuel caps, and then click on "FOR INFORMATION ON USHER FUEL
> CAP POLISHING". You will see pictures of the difference between the
> polished and unpolished caps. This in an option we offer as an addition to
> our fuel cap engraving. *The cost is $30/set of two caps.*
>
> 3. Finally, we have updated our shipping rates for our international
> customers. We ship mostly via the Post Office, and you can expect to
> receive your items within 10 business days. Normally it goes quicker, but
> that is the maximum that it should take. You no longer have to call us for
> an international shipping quote.
>
> 4. Thanks to all of you that have purchased hoses from
> www.kitplanehoses.com. We appreciate it, and will continue to provide
> top quality fuel and brake hoses at very reasonable prices. I have
> received a lot of positive feedback about our ordering process, but wanted
> to open it up to you. If you have any suggestions on what would make
> ordering hoses easier or more convenient, please feel free to let me know.
> Also, for those of you who live overseas, this ordering is also available
> with accurate shipping quotes at *www.kitplanehoses.com* Feel free to
> contact me at *steve@aircraftspecialty.com* with comments.
>
>
> 5. We also wanted to let everyone know that we are currently working on a
> few very innovative products that will be reasonably priced and will
> greatly enhance your RV. We are always working on innovating new things,
> but want to make sure they are tested and perfect before we release them
> for sale. As always, if any of you have any ideas on something that you
> would absolutely like to have, we are happy to work with builders to
> develop new items that might benefit the RV community.
>
> Fly safe and thanks again for all your patronage.
> Steve
> Aircraft Specialty
>
> *
>
> *
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Andair Fuel Caps, New Engraving Products, Updated International |
Shipping info for all RVers overseas, Kitplanehoses.com, and Secret
Squirrel Department
Check out the one Cessna uses. I bet they are pretty fond of it though.
http://www.google.com/search?q=cessna+alternate+static+valve&hl=en&prmd
=imvns&tbm=isch&tbo=u&source=univ&sa=X&ei=BoAgUJmdF4j7iwLOoIFg&
ved=0CF4QsAQ&biw=1559&bih=748
-GV
-----Original Message-----
From: mr.gsun <mr.gsun@gmail.com>
Sent: Mon, Aug 6, 2012 7:23 pm
Subject: Re: RV-List: Andair Fuel Caps, New Engraving Products, Updated In
ternational Shipping info for all RVers overseas, Kitplanehoses.com, and S
ecret Squirrel Department
What is available for good looking alternate static port valve?
Greg
On Aug 6, 2012 7:09 PM, "Aircraft Specialty" <aircraftspecialty@gmail.com>
wrote:
Good evening everyone. Hope you all had a great time at Oshkosh. For thos
e of you who were unable to attend, I am sure you were there in spirit.
We have been busy here at Aircraft Specialty, and wanted to announce a few
things.
1. We are now a US Distributor for Andair Locking Fuel Caps. Andair is ba
sed in England, and makes extremely high quality caps. The best part is th
at they are retrofittable into the standard RV flange. This allows you to
retrofit locking caps to your tank without having to make any modifications
, other than to proseal the Andair flange inside the Van's flange. We also
offer fuel cap engraving for the andair caps. The major advantage here is
that since we are a distributor, we are able to engrave the caps onsite an
d then ship them out to you. This saves you the hassle of having to purcha
se caps and then send them out to be engraved. We are offering the Andair
caps for $154/set (plain), $194/set (engraved), and $199/set (engraved with
color fill). These caps can be found at www.aircraftspecialty.com/rvprodu
cts.html
2. We are also offering polishing of the standard Vans fuel caps at a very
reasonable rate. If you go to www.aircraftspecialty.com/engraving.html, cl
ick on the fuel caps, and then click on "FOR INFORMATION ON USHER FUEL CAP
POLISHING". You will see pictures of the difference between the polished a
nd unpolished caps. This in an option we offer as an addition to our fuel
cap engraving. The cost is $30/set of two caps.
3. Finally, we have updated our shipping rates for our international custom
ers. We ship mostly via the Post Office, and you can expect to receive you
r items within 10 business days. Normally it goes quicker, but that is the
maximum that it should take. You no longer have to call us for an interna
tional shipping quote.
4. Thanks to all of you that have purchased hoses from www.kitplanehoses.co
m. We appreciate it, and will continue to provide top quality fuel and bra
ke hoses at very reasonable prices. I have received a lot of positive feed
back about our ordering process, but wanted to open it up to you. If you h
ave any suggestions on what would make ordering hoses easier or more conven
ient, please feel free to let me know. Also, for those of you who live ove
rseas, this ordering is also available with accurate shipping quotes at www
.kitplanehoses.com Feel free to contact me at steve@aircraftspecialty.com
with comments.
5. We also wanted to let everyone know that we are currently working on a f
ew very innovative products that will be reasonably priced and will greatly
enhance your RV. We are always working on innovating new things, but want
to make sure they are tested and perfect before we release them for sale.
As always, if any of you have any ideas on something that you would absolu
tely like to have, we are happy to work with builders to develop new items
that might benefit the RV community.
Fly safe and thanks again for all your patronage.
Steve
Aircraft Specialty
t="_blank">http://www.matronics.com/Navigator?RV-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Andair Fuel Caps, New Engraving Products, Updated International |
Shipping info for all RVers overseas, Kitplanehoses.com, and Secret
Squirrel Department
http://www.aircraftpartsandsalvage.com/cessna-alternate-static-source-valve
-p-19809.html
-GV
-----Original Message-----
From: mr.gsun <mr.gsun@gmail.com>
Sent: Mon, Aug 6, 2012 7:23 pm
Subject: Re: RV-List: Andair Fuel Caps, New Engraving Products, Updated In
ternational Shipping info for all RVers overseas, Kitplanehoses.com, and S
ecret Squirrel Department
What is available for good looking alternate static port valve?
Greg
On Aug 6, 2012 7:09 PM, "Aircraft Specialty" <aircraftspecialty@gmail.com>
wrote:
Good evening everyone. Hope you all had a great time at Oshkosh. For thos
e of you who were unable to attend, I am sure you were there in spirit.
We have been busy here at Aircraft Specialty, and wanted to announce a few
things.
1. We are now a US Distributor for Andair Locking Fuel Caps. Andair is ba
sed in England, and makes extremely high quality caps. The best part is th
at they are retrofittable into the standard RV flange. This allows you to
retrofit locking caps to your tank without having to make any modifications
, other than to proseal the Andair flange inside the Van's flange. We also
offer fuel cap engraving for the andair caps. The major advantage here is
that since we are a distributor, we are able to engrave the caps onsite an
d then ship them out to you. This saves you the hassle of having to purcha
se caps and then send them out to be engraved. We are offering the Andair
caps for $154/set (plain), $194/set (engraved), and $199/set (engraved with
color fill). These caps can be found at www.aircraftspecialty.com/rvprodu
cts.html
2. We are also offering polishing of the standard Vans fuel caps at a very
reasonable rate. If you go to www.aircraftspecialty.com/engraving.html, cl
ick on the fuel caps, and then click on "FOR INFORMATION ON USHER FUEL CAP
POLISHING". You will see pictures of the difference between the polished a
nd unpolished caps. This in an option we offer as an addition to our fuel
cap engraving. The cost is $30/set of two caps.
3. Finally, we have updated our shipping rates for our international custom
ers. We ship mostly via the Post Office, and you can expect to receive you
r items within 10 business days. Normally it goes quicker, but that is the
maximum that it should take. You no longer have to call us for an interna
tional shipping quote.
4. Thanks to all of you that have purchased hoses from www.kitplanehoses.co
m. We appreciate it, and will continue to provide top quality fuel and bra
ke hoses at very reasonable prices. I have received a lot of positive feed
back about our ordering process, but wanted to open it up to you. If you h
ave any suggestions on what would make ordering hoses easier or more conven
ient, please feel free to let me know. Also, for those of you who live ove
rseas, this ordering is also available with accurate shipping quotes at www
.kitplanehoses.com Feel free to contact me at steve@aircraftspecialty.com
with comments.
5. We also wanted to let everyone know that we are currently working on a f
ew very innovative products that will be reasonably priced and will greatly
enhance your RV. We are always working on innovating new things, but want
to make sure they are tested and perfect before we release them for sale.
As always, if any of you have any ideas on something that you would absolu
tely like to have, we are happy to work with builders to develop new items
that might benefit the RV community.
Fly safe and thanks again for all your patronage.
Steve
Aircraft Specialty
t="_blank">http://www.matronics.com/Navigator?RV-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Cork Gaskets For Comant CI122 VHF Antennas |
Does anyone have a good source for the cork gaskets used with the Comant CI 122
VHF Com antennas? When I removed them from the old RV-8 fuselage, I must have
put them in a very "safe" place and now I can't find them anywhere. Guess they're
pretty safe. Anyway, I need to order a couple more but I checked the Chief,
Pacific Coast Avionics, and ACS web pages and found the antennas but no
references to just ordering the cork gaskets.
<http://www.cobham.com/media/9104/ci%20122%20data%20sheet.pdf>http://www.cobham.com/media/9104/ci%20122%20data%20sheet.pdf
Thanks for any tips...
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 80+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|