---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Sun 11/18/12: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:59 AM - Re: Looking for someone to work on my RV-6 (William Dean) 2. 06:02 AM - Prop cable throw vs governor throw (Ralph E. Capen) 3. 06:41 AM - Re: Prop cable throw vs governor throw (Carl Froehlich) 4. 08:32 AM - Re: Prop cable throw vs governor throw (Ralph E. Capen) 5. 01:26 PM - Re: Looking for someone to work on my RV-6 (HCRV6@comcast.net) ________________________________ Message 1 _____________________________________ Time: 03:59:26 AM PST US Subject: Re: RV-List: Looking for someone to work on my RV-6 From: William Dean We have gone to Yahoo groups and removed all the groups, how do we get off this group. My father passed away and we no longer need these emails. Thank you for any assistance you can provide. The Dean family Sent from my iPad On Nov 17, 2012, at 5:16 PM, N616TB wrote: > > I have a flying RV-6 with over 150 hours. I had an incident landing in grass where a wheel pant came apart and rotated into the fuel tank. We were able to patch the tank however, I would like to have a new tank built. I have all the new parts for a completely new tank. I am looking for someone in Texas who could do this work as I am in process of moving my shop. I can bring the airplane to your location. > Please contact me off list. N616tb at btsapps dot com > > Best Regards; > > Timothy Bryan > We are what we repeatedly do. Excellence, therefore, is not an act but a habit. > Aristotle > > > > > ________________________________ Message 2 _____________________________________ Time: 06:02:25 AM PST US From: "Ralph E. Capen" Subject: RV-List: Prop cable throw vs governor throw Folks, I'm in the final reassembly stages after a derecho/tornado blew the hangar door in to my prop..prop is rebuilt and engine tore down for inspection. I have found while verifying my cabling that the prop governor has 1/8" more throw than my cable. I have it set up so the fine stop matches up but it won't go all the way coarse. I'm kinda thinking it doesn't matter as I don't think I have ever had the prop that far coarse. I can get a custom made cable with the correct throw - but do I need to? RV6A IO360B1F6 LASAR/Injected MTV12(B) 183-59 hydraulic CS I'll be sending this to the MT folks as well for their input. Ralph Capen ________________________________ Message 3 _____________________________________ Time: 06:41:46 AM PST US From: "Carl Froehlich" Subject: RE: RV-List: Prop cable throw vs governor throw It sounds like you have more than enough movement to govern below 2000 RPM - call it done. Carl From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen Sent: Sunday, November 18, 2012 9:02 AM Subject: RV-List: Prop cable throw vs governor throw Folks, I'm in the final reassembly stages after a derecho/tornado blew the hangar door in to my prop..prop is rebuilt and engine tore down for inspection. I have found while verifying my cabling that the prop governor has 1/8" more throw than my cable. I have it set up so the fine stop matches up but it won't go all the way coarse. I'm kinda thinking it doesn't matter as I don't think I have ever had the prop that far coarse. I can get a custom made cable with the correct throw - but do I need to? RV6A IO360B1F6 LASAR/Injected MTV12(B) 183-59 hydraulic CS I'll be sending this to the MT folks as well for their input. Ralph Capen ________________________________ Message 4 _____________________________________ Time: 08:32:37 AM PST US From: "Ralph E. Capen" Subject: RE: RV-List: Prop cable throw vs governor throw I have been flying it this way for three years...you have a good point! From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Carl Froehlich Sent: Sunday, November 18, 2012 9:41 AM Subject: RE: RV-List: Prop cable throw vs governor throw It sounds like you have more than enough movement to govern below 2000 RPM - call it done. Carl From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen Sent: Sunday, November 18, 2012 9:02 AM Subject: RV-List: Prop cable throw vs governor throw Folks, I'm in the final reassembly stages after a derecho/tornado blew the hangar door in to my prop..prop is rebuilt and engine tore down for inspection. I have found while verifying my cabling that the prop governor has 1/8" more throw than my cable. I have it set up so the fine stop matches up but it won't go all the way coarse. I'm kinda thinking it doesn't matter as I don't think I have ever had the prop that far coarse. I can get a custom made cable with the correct throw - but do I need to? RV6A IO360B1F6 LASAR/Injected MTV12(B) 183-59 hydraulic CS I'll be sending this to the MT folks as well for their input. Ralph Capen www.aeroelectric.com www.buildersbooks.com www.homebuilthelp.com http://www.matronics.com/contribution http://www.matronics.com/Navigator?RV-List http://forums.matronics.com ________________________________ Message 5 _____________________________________ Time: 01:26:46 PM PST US From: HCRV6@comcast.net Subject: Re: RV-List: Looking for someone to work on my RV-6 William Dean Family, Sorry for you loss. Go to www.matronics.com/subscribe/ and follow the prompt. Harry Crosby ----- Original Message ----- From: "William Dean" Sent: Sunday, November 18, 2012 3:58:23 AM Subject: Re: RV-List: Looking for someone to work on my RV-6 We have gone to Yahoo groups and removed all the groups, how do we get off this group. My father passed away and we no longer need these emails. Thank you for any assistance you can provide. The Dean family Sent from my iPad On Nov 17, 2012, at 5:16 PM, N616TB wrote: > > I have a flying RV-6 with over 150 hours. I had an incident landing in grass where a wheel pant came apart and rotated into the fuel tank. We were able to patch the tank however, I would like to have a new tank built. I have all the new parts for a completely new tank. I am looking for someone in Texas who could do this work as I am in process of moving my shop. I can bring the airplane to your location. > Please contact me off list. N616tb at btsapps dot com > > Best Regards; > > Timothy Bryan > We are what we repeatedly do. Excellence, therefore, is not an act but a habit. > Aristotle > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.