Today's Message Index:
----------------------
1. 01:31 PM - Parking brake check valve (James Bean)
2. 01:46 PM - Re: Parking brake check valve (Ed Godfrey)
3. 01:57 PM - Re: Parking brake check valve (Ralph E. Capen)
4. 02:14 PM - Re: Parking brake check valve (Ralph E. Capen)
5. 03:24 PM - Re: Parking brake check valve (Dave Saylor)
6. 05:56 PM - Re: Parking brake check valve (Ed Holyoke)
7. 06:11 PM - Re: Parking brake check valve (Bobby Hester)
8. 06:15 PM - Re: Parking brake check valve (Bobby Hester)
9. 07:27 PM - Re: Parking brake check valve (vanremog@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Parking brake check valve |
I have misplaced the drawing on the dual check valve used for a parking
brake on our RV's.
I have a hazy recollection that the lever is perpendicular to the fluid
flow when the check valves are operating.
Anyone have this information or a steer to where I could download the
drawing?
thanks
Jim Bean
RV-8 81110 MN
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
Jim,
If you are referring to the Matco parking brake valve, you can find
the information at
http://www.matcomfg.com/PARKINGBRAKEVALVEDUAL-idv-3579-8.html
Ed Godfrey
40717
On 2/25/2013 3:29 PM, James Bean wrote:
>
> I have misplaced the drawing on the dual check valve used for a
> parking brake on our RV's.
> I have a hazy recollection that the lever is perpendicular to the
> fluid flow when the check valves are operating.
> Anyone have this information or a steer to where I could download the
> drawing?
> thanks
> Jim Bean
> RV-8 81110 MN
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
Which valve?
If I recall correctly, there are two. I have one installed on my 6A - don't remember
the brand though. I'll see if I can dig out the documentation.
Ralph
-----Original Message-----
>From: James Bean <jimbean6@optimum.net>
>Sent: Feb 25, 2013 4:29 PM
>To: rv-list@matronics.com
>Subject: RV-List: Parking brake check valve
>
>
>I have misplaced the drawing on the dual check valve used for a parking
>brake on our RV's.
>I have a hazy recollection that the lever is perpendicular to the fluid
>flow when the check valves are operating.
>Anyone have this information or a steer to where I could download the
>drawing?
>thanks
>Jim Bean
>RV-8 81110 MN
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
This is not the one that I have - I'll continue looking.
-----Original Message-----
>From: Ed Godfrey <egodfrey@ameritech.net>
>Sent: Feb 25, 2013 4:39 PM
>To: rv-list@matronics.com
>Subject: Re: RV-List: Parking brake check valve
>
>
>Jim,
> If you are referring to the Matco parking brake valve, you can find
>the information at
>
>http://www.matcomfg.com/PARKINGBRAKEVALVEDUAL-idv-3579-8.html
>
>Ed Godfrey
>40717
>
>On 2/25/2013 3:29 PM, James Bean wrote:
>>
>> I have misplaced the drawing on the dual check valve used for a
>> parking brake on our RV's.
>> I have a hazy recollection that the lever is perpendicular to the
>> fluid flow when the check valves are operating.
>> Anyone have this information or a steer to where I could download the
>> drawing?
>> thanks
>> Jim Bean
>> RV-8 81110 MN
>>
>>
>>
>>
>>
>
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
Generally the lever blocks flow when it's perpendicular to the line, open
when it's parallel. I recall that it doesn't require a full 90* motion to
open the valve. It's most likely either made by Matco or Grove.
On Monday, February 25, 2013, James Bean wrote:
>
> I have misplaced the drawing on the dual check valve used for a parking
> brake on our RV's.
> I have a hazy recollection that the lever is perpendicular to the fluid
> flow when the check valves are operating.
> Anyone have this information or a steer to where I could download the
> drawing?
> thanks
> Jim Bean
> RV-8 81110 MN
>
>
--
Dave Saylor
831-750-0284 CL
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
The Matco valve that I have, earlier version than the one on the Matco
site, wants the lever at 45 degrees to the body for both open and closed
positions. I verified this by blowing through it while operating the
lever. This orientation makes it easier to rig the cable, too. Make sure
you have positive stops at both positions. Somebody I know didn't and
the fire dept wound up opening his bleeder valves to get him off the
taxiway so the jets could get by when he couldn't release the brakes.
Ed Holyoke
On 2/25/2013 3:19 PM, Dave Saylor wrote:
> Generally the lever blocks flow when it's perpendicular to the line,
> open when it's parallel. I recall that it doesn't require a full 90*
> motion to open the valve. It's most likely either made by Matco or Grove.
>
> On Monday, February 25, 2013, James Bean wrote:
>
>
> I have misplaced the drawing on the dual check valve used for a
> parking brake on our RV's.
> I have a hazy recollection that the lever is perpendicular to the
> fluid flow when the check valves are operating.
> Anyone have this information or a steer to where I could download
> the drawing?
> thanks
> Jim Bean
> RV-8 81110 MN
>
> ===================================
> target="_blank">http://www.matronics.com/Navigator?RV-List
> ===================================
> MS -
> k">http://forums.matronics.com
> ===================================
> e -
> -Matt Dralle, List Admin.
> t="_blank">http://www.matronics.com/contribution
> ===================================
>
>
> --
> Dave Saylor
> 831-750-0284 CL
> *
>
>
> *
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
Here is my Matco parking brake
https://picasaweb.google.com/lh/photo/QZey-IEOJoYkfSdPBSRF4tMTjNZETYmyPJy0li
ipFm0?feat=directlink
Sent from my Verizon iPhone
On Feb 25, 2013, at 3:29 PM, James Bean <jimbean6@optimum.net> wrote:
>
> I have misplaced the drawing on the dual check valve used for a parking br
ake on our RV's.
> I have a hazy recollection that the lever is perpendicular to the fluid fl
ow when the check valves are operating.
> Anyone have this information or a steer to where I could download the draw
ing?
> thanks
> Jim Bean
> RV-8 81110 MN
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
Here is their newer model
https://picasaweb.google.com/lh/photo/FAuf5mb-Ct5eGfu10tZjrtMTjNZETYmyPJy0li
ipFm0?feat=directlink
Sent from my Verizon iPhone
On Feb 25, 2013, at 3:29 PM, James Bean <jimbean6@optimum.net> wrote:
>
> I have misplaced the drawing on the dual check valve used for a parking br
ake on our RV's.
> I have a hazy recollection that the lever is perpendicular to the fluid fl
ow when the check valves are operating.
> Anyone have this information or a steer to where I could download the draw
ing?
> thanks
> Jim Bean
> RV-8 81110 MN
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
>
>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Parking brake check valve |
Attached is the drawing of the Parker Cleveland Valve that I have.
-GV
-----Original Message-----
From: Ralph E. Capen <recapen@earthlink.net>
Sent: Mon, Feb 25, 2013 2:15 pm
Subject: Re: RV-List: Parking brake check valve
This is not the one that I have - I'll continue looking.
-----Original Message-----
>From: Ed Godfrey <egodfrey@ameritech.net>
>Sent: Feb 25, 2013 4:39 PM
>To: rv-list@matronics.com
>Subject: Re: RV-List: Parking brake check valve
>
>
>Jim,
> If you are referring to the Matco parking brake valve, you can find
>the information at
>
>http://www.matcomfg.com/PARKINGBRAKEVALVEDUAL-idv-3579-8.html
>
>Ed Godfrey
>40717
>
>On 2/25/2013 3:29 PM, James Bean wrote:
>>
>> I have misplaced the drawing on the dual check valve used for a
>> parking brake on our RV's.
>> I have a hazy recollection that the lever is perpendicular to the
>> fluid flow when the check valves are operating.
>> Anyone have this information or a steer to where I could download the
>> drawing?
>> thanks
>> Jim Bean
>> RV-8 81110 MN
>>
>>
>>
>>
>>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|