Today's Message Index:
----------------------
1. 08:40 AM - Wing walk adhesive removal (Ralph E. Capen)
2. 08:59 AM - Re: Wing walk adhesive removal (Carl Froehlich)
3. 09:49 AM - Re: Wing walk adhesive removal (don van santen)
4. 09:50 AM - Re: Wing walk adhesive removal (larygagnon@aol.com)
5. 11:32 AM - Re: Wing walk adhesive removal (Ralph E. Capen)
6. 12:13 PM - Re: Wing walk adhesive removal ()
7. 12:21 PM - Re: Wing walk adhesive removal (Ralph E. Capen)
8. 01:40 PM - Re: Wing walk adhesive removal (David Burton)
9. 05:53 PM - Re: Wing walk adhesive removal (scott bilinski)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Wing walk adhesive removal |
I checked the archives and was able to easily remove the wing walk...from the glue
still stuck to the paint....
Is there an easy way to remove the glue?
I have tried Avgas, bug and tar remover, MEK, and paint thinner. None really break
down the glue....the Avgas does a real good job of final cleaning of the
areas that I have been able to remove the glue manually - by rubbing it in to
boogers with my hands and manually picking the boogers off!
Any other ideas would be appreciated.....
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Wing walk adhesive removal |
Replacing the UHMW tape on the flaps I found a SMALL about of heat from a
hot air gun loosens up the glue well enough to come off the tape. Too much
heat and you soften the paint. For the last bit of residue I used Coleman
Fuel as the cleaner.
You might try Goo Gone for what you have.
Carl
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen
Sent: Saturday, September 06, 2014 11:39 AM
Subject: RV-List: Wing walk adhesive removal
I checked the archives and was able to easily remove the wing walk...from
the glue still stuck to the paint....
Is there an easy way to remove the glue?
I have tried Avgas, bug and tar remover, MEK, and paint thinner. None
really break down the glue....the Avgas does a real good job of final
cleaning of the areas that I have been able to remove the glue manually - by
rubbing it in to boogers with my hands and manually picking the boogers
off!
Any other ideas would be appreciated.....
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Wing walk adhesive removal |
Try 3m woodgrain and stripe adhesive remover.
On Sep 6, 2014 9:04 AM, "Carl Froehlich" <carl.froehlich@verizon.net> wrote:
> carl.froehlich@verizon.net>
>
> Replacing the UHMW tape on the flaps I found a SMALL about of heat from a
> hot air gun loosens up the glue well enough to come off the tape. Too much
> heat and you soften the paint. For the last bit of residue I used Coleman
> Fuel as the cleaner.
>
> You might try Goo Gone for what you have.
>
> Carl
> -----Original Message-----
> From: owner-rv-list-server@matronics.com
> [mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen
> Sent: Saturday, September 06, 2014 11:39 AM
> To: rv-list
> Subject: RV-List: Wing walk adhesive removal
>
>
> I checked the archives and was able to easily remove the wing walk...from
> the glue still stuck to the paint....
>
> Is there an easy way to remove the glue?
> I have tried Avgas, bug and tar remover, MEK, and paint thinner. None
> really break down the glue....the Avgas does a real good job of final
> cleaning of the areas that I have been able to remove the glue manually -
> by
> rubbing it in to boogers with my hands and manually picking the boogers
> off!
>
> Any other ideas would be appreciated.....
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing walk adhesive removal |
Try Goof-off from Loews or Home Depot=0A=0ALarry=0A=0A =0A=0A =0A
=0A =0A=0A-----Original Message-----=0AFrom: Carl Froehlich <carl.froe
hlich@verizon.net>=0ATo: rv-list <rv-list@matronics.com>=0ASent: Sat, Se
p 6, 2014 12:00 pm=0ASubject: RE: RV-List: Wing walk adhesive
arl.froehlich@verizon.net>=0A=0AReplacing the UHMW tape on the flaps
I found a SMALL about of heat from a=0Ahot air gun loos
ens up the glue well enough to come off the tape. Too
much=0Aheat and you soften the paint. For the last bit of
residue I used Coleman=0AFuel as the cleaner.=0A=0AYou might
try Goo Gone for what you have.=0A=0ACarl=0A-----Original Message-
----=0AFrom: owner-rv-list-server@matronics.com=0A[mailto:owner-rv-list-server
@matronics.com] On Behalf Of Ralph E. Capen=0ASent: Saturday, Se
ptember 06, 2014 11:39 AM=0ATo: rv-list=0ASubject: RV-List: Wing
E. Capen" <recapen@earthlink.net>=0A=0AI checked the archives and
was able to easily remove the wing walk...from=0Athe glue stil
l stuck to the paint....=0A=0AIs there an easy way to remove
the glue?=0AI have tried Avgas, bug and tar remover, MEK,
and paint thinner. None=0Areally break down the glue....the A
vgas does a real good job of final=0Acleaning of the areas
that I have been able to remove the glue manually - by=0Ar
ubbing it in to boogers with my hands and manually pickin
g the boogers=0Aoff!=0A=0AAny other ideas would be appreciated....
===========================
===========================
===========================
===========================
=========================0A=0A=0A
=0A=0A =0A
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing walk adhesive removal |
Thanks to all who provided suggestions.
I was able to remove the adhesive with Avgas after letting it soak for a couple
of minutes and rubbing it off with a paper towel. I tried the Avgas one more
time before going out to buy something else as it was available here at the hangar.
Now I need to clean it well before putting on the new one!
Ralph
RV6A N822AR "Patience" @ N06 220hrs.....
-----Original Message-----
>From: "Ralph E. Capen" <recapen@earthlink.net>
>Sent: Sep 6, 2014 11:38 AM
>To: rv-list <rv-list@matronics.com>
>Subject: RV-List: Wing walk adhesive removal
>
>
>I checked the archives and was able to easily remove the wing walk...from the
glue still stuck to the paint....
>
>Is there an easy way to remove the glue?
>I have tried Avgas, bug and tar remover, MEK, and paint thinner. None really
break down the glue....the Avgas does a real good job of final cleaning of the
areas that I have been able to remove the glue manually - by rubbing it in to
boogers with my hands and manually picking the boogers off!
>
>Any other ideas would be appreciated.....
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing walk adhesive removal |
This works really well. The friction heats the UHMW and glue and then
shears it right off.
http://www.amazon.com/Eraser-Pad-Pinstripe-Adhesive-Removal/dp/B0020HQRQC
/ref=sr_1_2?s=automotive&ie=UTF8&qid=1314142476&sr=1-2
Probably takes 1/2 hour per flap. I tried scraping, solvent, and
everything else, but this was the solution. Your local auto body shop
probably has =98em too.
From: don van santen
Sent: Saturday, September 06, 2014 12:48 PM
Subject: RE: RV-List: Wing walk adhesive removal
Try 3m woodgrain and stripe adhesive remover.
On Sep 6, 2014 9:04 AM, "Carl Froehlich" <carl.froehlich@verizon.net>
wrote:
<carl.froehlich@verizon.net>
Replacing the UHMW tape on the flaps I found a SMALL about of heat
from a
hot air gun loosens up the glue well enough to come off the tape. Too
much
heat and you soften the paint. For the last bit of residue I used
Coleman
Fuel as the cleaner.
You might try Goo Gone for what you have.
Carl
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E.
Capen
Sent: Saturday, September 06, 2014 11:39 AM
To: rv-list
Subject: RV-List: Wing walk adhesive removal
<recapen@earthlink.net>
I checked the archives and was able to easily remove the wing
walk...from
the glue still stuck to the paint....
Is there an easy way to remove the glue?
I have tried Avgas, bug and tar remover, MEK, and paint thinner. None
really break down the glue....the Avgas does a real good job of final
cleaning of the areas that I have been able to remove the glue
manually - by
rubbing it in to boogers with my hands and manually picking the
boogers
off!
Any other ideas would be appreciated.....
==========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
==========
FORUMS -
_blank">http://forums.matronics.com
==========
b Site -
-Matt Dralle, List Admin.
target="_blank">http://www.matronics.com/contribution
==========
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing walk adhesive removal |
I'll remember that for the next time....there will be!
-----Original Message-----
From: kboatright1@comcast.net
Sent: Sep 6, 2014 3:12 PM
Subject: Re: RV-List: Wing walk adhesive removal
This works really well. The friction heats the UHMW and glue and then shears it
right off.
http://www.amazon.com/Eraser-Pad-Pinstripe-Adhesive-Removal/dp/B0020HQRQC/ref=sr_1_2?s=automotive&ie=UTF8&qid=1314142476&sr=1-2
Probably takes 1/2 hour per flap. I tried scraping, solvent, and everything else,
but this was the solution. Your local auto body shop probably has em too.
From: don van santen
Sent: Saturday, September 06, 2014 12:48 PM
Subject: RE: RV-List: Wing walk adhesive removal
Try 3m woodgrain and stripe adhesive remover.
On Sep 6, 2014 9:04 AM, "Carl Froehlich" wrote:
Replacing the UHMW tape on the flaps I found a SMALL about of heat from a
hot air gun loosens up the glue well enough to come off the tape. Too much
heat and you soften the paint. For the last bit of residue I used Coleman
Fuel as the cleaner.
You might try Goo Gone for what you have.
Carl
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen
Sent: Saturday, September 06, 2014 11:39 AM
Subject: RV-List: Wing walk adhesive removal
I checked the archives and was able to easily remove the wing walk...from
the glue still stuck to the paint....
Is there an easy way to remove the glue?
I have tried Avgas, bug and tar remover, MEK, and paint thinner. None
really break down the glue....the Avgas does a real good job of final
cleaning of the areas that I have been able to remove the glue manually - by
rubbing it in to boogers with my hands and manually picking the boogers
off!
Any other ideas would be appreciated.....
==========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
==========
FORUMS -
_blank">http://forums.matronics.com
==========
b Site -
-Matt Dralle, List Admin.
target="_blank">http://www.matronics.com/contribution
==========
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing walk adhesive removal |
3M and others make an adhesive removing solvent which is safe for most
paints and plastics. It's mostly Naphtha and Linoleic acid (the chemical
extracted from citrus). You can purchase spray cans of it and it works
great. It also is good a dissolving old lubricant from mechanisms. I rinse
afterwards with alcohol to remove any residue that is left.
You may have luck finding spray cans of it at an auto paint store. I
believe Granger carries it. I purchase it by the gallon from Ace Hardware.
My branch has to order it, but it shipping is free. That's significant
since a gallon of it in a heavy can would be expensive to ship.
One of the nice features of this product is that it has almost no health
risks associated with its use...
David
--------------------------------------------------
From: "Ralph E. Capen" <recapen@earthlink.net>
Sent: Saturday, September 06, 2014 8:38 AM
Subject: RV-List: Wing walk adhesive removal
>
> I checked the archives and was able to easily remove the wing walk...from
> the glue still stuck to the paint....
>
> Is there an easy way to remove the glue?
> I have tried Avgas, bug and tar remover, MEK, and paint thinner. None
> really break down the glue....the Avgas does a real good job of final
> cleaning of the areas that I have been able to remove the glue manually -
> by rubbing it in to boogers with my hands and manually picking the
> boogers off!
>
> Any other ideas would be appreciated.....
>
>
>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wing walk adhesive removal |
Try Goofoff..... Works great.
On Saturday, September 6, 2014 1:57 PM, David Burton <d-burton@comcast.net> wrote:
3M and others make an adhesive removing solvent which is safe for most
paints and plastics. It's mostly Naphtha and Linoleic acid (the chemical
extracted from citrus). You can purchase spray cans of it and it works
great. It also is good a dissolving old lubricant from mechanisms. I rinse
afterwards with alcohol to remove any residue that is left.
You may have luck finding spray cans of it at an auto paint store. I
believe Granger carries it. I purchase it by the gallon from Ace Hardware.
My branch has to order it, but it shipping is free. That's significant
since a gallon of it in a heavy can would be expensive to ship.
One of the nice features of this product is that it has almost no health
risks associated with its use...
David
--------------------------------------------------
From: "Ralph E. Capen" <recapen@earthlink.net>
Sent: Saturday, September 06, 2014 8:38 AM
Subject: RV-List: Wing walk adhesive removal
>
> I checked the archives and was able to easily remove the wing walk...from
> the glue still stuck to the paint....
>
> Is there an easy way to remove the glue?
> I have tried Avgas, bug and tar remover, MEK, and paint thinner. None
> really break down the glue....the Avgas does a real good job of final
> cleaning of the areas that I have been able to remove the glue manually -
> by rubbing it in to boogers with my hands and manually picking the
> boogers off!
>
> Any other ideas would be appreciated.....
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|