---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Tue 01/20/15: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:44 AM - Delta-Pop ADS-B antenna placement (Ralph E. Capen) 2. 09:20 AM - Re: Delta-Pop ADS-B antenna placement (David Leonard) 3. 09:37 AM - Re: Delta-Pop ADS-B antenna placement (John Jessen) 4. 09:57 AM - Re: Delta-Pop ADS-B antenna placement (Bob Leffler) 5. 10:18 AM - Re: Delta-Pop ADS-B antenna placement (Ralph E. Capen) 6. 10:22 AM - Re: Delta-Pop ADS-B antenna placement (Ralph E. Capen) 7. 10:22 AM - Re: Delta-Pop ADS-B antenna placement (John Jessen) 8. 10:37 AM - Re: Delta-Pop ADS-B antenna placement (Bob Leffler) 9. 10:37 AM - Re: Delta-Pop ADS-B antenna placement (Bob Leffler) 10. 10:58 AM - Re: Delta-Pop ADS-B antenna placement (John Jessen) 11. 11:24 AM - Re: Delta-Pop ADS-B antenna placement (David Leonard) 12. 11:58 AM - Re: Delta-Pop ADS-B antenna placement (Larry Bowen) 13. 12:33 PM - Re: Delta-Pop ADS-B antenna placement (Tim Olson) 14. 04:18 PM - Re: RV-List Digest: 0 Msgs - 01/19/15 (Jim Clark) 15. 06:20 PM - Re: Re: RV-List Digest: 0 Msgs - 01/19/15 (Dale Ensing) ________________________________ Message 1 _____________________________________ Time: 08:44:53 AM PST US From: "Ralph E. Capen" Subject: RV-List: Delta-Pop ADS-B antenna placement Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna.... Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside. Thoughts please? Thanks, Ralph RV6A N822AR @ N06 "Patience" 240 hrs.... ________________________________ Message 2 _____________________________________ Time: 09:20:09 AM PST US Subject: Re: RV-List: Delta-Pop ADS-B antenna placement From: David Leonard I put mine back in the empenage without a doubbler and have not had any noticeable issues. Dave Leonard On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen wrote: > > Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to > figure out where to install the antenna.... > > Since the Delta-Pop is a blade-type antenna, it will need to be mounted > along the fuselage direction of flight axis. There are a couple of places > where bulkheads mount to the bottom skin and are aligned correctly. I'm > thinking of taking advantage of one of these bulkheads instead of mounting > a doubler plate to the underside. > > Thoughts please? > > Thanks, > Ralph > RV6A N822AR @ N06 "Patience" 240 hrs.... > > ________________________________ Message 3 _____________________________________ Time: 09:37:02 AM PST US Subject: Re: RV-List: Delta-Pop ADS-B antenna placement From: John Jessen Inside or outside? > On Jan 20, 2015, at 9:19 AM, David Leonard wrote: > > I put mine back in the empenage without a doubbler and have not had any no ticeable issues. > > Dave Leonard > >> On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen w rote: >> >> Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna.... >> >> Since the Delta-Pop is a blade-type antenna, it will need to be mounted a long the fuselage direction of flight axis. There are a couple of places wh ere bulkheads mount to the bottom skin and are aligned correctly. I'm think ing of taking advantage of one of these bulkheads instead of mounting a doub ler plate to the underside. >> >> Thoughts please? >> >> Thanks, >> Ralph >> RV6A N822AR @ N06 "Patience" 240 hrs.... >> >> >> >> >> ========== >> br> fts!) >> r> > com" target="_blank">www.aeroelectric.com >> w.buildersbooks.com" target="_blank">www.buildersbooks.com >> p.com" target="_blank">www.homebuilthelp.com >> e.com" target="_blank">www.mypilotstore.com >> " target="_blank">www.mrrace.com >> target="_blank">http://www.matronics.com/contribution >> -Matt Dralle, List Admin. >> ========== >> ist" target="_blank">http://www.matronics.com/Navigator?RV-List >> ========== >> FORUMS - >> _blank">http://forums.matronics.com >> ========== > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 4 _____________________________________ Time: 09:57:06 AM PST US From: Bob Leffler Subject: Re: RV-List: Delta-Pop ADS-B antenna placement John, The navworx unit requires two antennas. One for the UAT and one for the GPS . The blade antenna they are talking about the UAT output which is similar to a transponder antenna. I wouldn't recommend locating that internally. Bob Sent from my iPhone On Jan 20, 2015, at 12:35 PM, John Jessen wrote: Inside or outside? > On Jan 20, 2015, at 9:19 AM, David Leonard wrote: > > I put mine back in the empenage without a doubbler and have not had any no ticeable issues. > > Dave Leonard > >> On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen w rote: >> >> Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna.... >> >> Since the Delta-Pop is a blade-type antenna, it will need to be mounted a long the fuselage direction of flight axis. There are a couple of places wh ere bulkheads mount to the bottom skin and are aligned correctly. I'm think ing of taking advantage of one of these bulkheads instead of mounting a doub ler plate to the underside. >> >> Thoughts please? >> >> Thanks, >> Ralph >> RV6A N822AR @ N06 "Patience" 240 hrs.... >> >> >> >> >> ========== >> br> fts!) >> r> > com" target="_blank">www.aeroelectric.com >> w.buildersbooks.com" target="_blank">www.buildersbooks.com >> p.com" target="_blank">www.homebuilthelp.com >> e.com" target="_blank">www.mypilotstore.com >> " target="_blank">www.mrrace.com >> target="_blank">http://www.matronics.com/contribution >> -Matt Dralle, List Admin. >> ========== >> ist" target="_blank">http://www.matronics.com/Navigator?RV-List >> ========== >> FORUMS - >> _blank">http://forums.matronics.com >> ========== >> >> >> > > > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ________________________________ Message 5 _____________________________________ Time: 10:18:27 AM PST US From: "Ralph E. Capen" Subject: Re: RV-List: Delta-Pop ADS-B antenna placement Any pictures?! -----Original Message----- From: David Leonard Sent: Jan 20, 2015 12:19 PM Subject: Re: RV-List: Delta-Pop ADS-B antenna placement I put mine back in the empenage without a doubbler and have not had any noticeable issues. Dave Leonard On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen wrote: Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna.... Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside. Thoughts please? Thanks, Ralph RV6A N822AR @ N06 "Patience" 240 hrs.... ========== br> fts!) r> > com" target="_blank">www.aeroelectric.com w.buildersbooks.com" target="_blank">www.buildersbooks.com p.com" target="_blank">www.homebuilthelp.com e.com" target="_blank">www.mypilotstore.com " target="_blank">www.mrrace.com target="_blank">http://www.matronics.com/contribution -Matt Dralle, List Admin. ========== ist" target="_blank">http://www.matronics.com/Navigator?RV-List ========== FORUMS - _blank">http://forums.matronics.com ========== ________________________________ Message 6 _____________________________________ Time: 10:22:10 AM PST US From: "Ralph E. Capen" Subject: Re: RV-List: Delta-Pop ADS-B antenna placement I'm planning on getting my position data from my 420W - so I shouldn't need the second GPS antenna...but that sounds like a good plan b place to put it. -----Original Message----- From: Bob Leffler Sent: Jan 20, 2015 12:56 PM Subject: Re: RV-List: Delta-Pop ADS-B antenna placement John, The navworx unit requires two antennas. One for the UAT and one for the GPS. The blade antenna they are talking about the UAT output which is similar to a transponder antenna. I wouldn't recommend locating that internally. Bob Sent from my iPhone On Jan 20, 2015, at 12:35 PM, John Jessen wrote: Inside or outside? On Jan 20, 2015, at 9:19 AM, David Leonard wrote: I put mine back in the empenage without a doubbler and have not had any noticeable issues. Dave Leonard On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen wrote: Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna.... Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside. Thoughts please? Thanks, Ralph RV6A N822AR @ N06 "Patience" 240 hrs.... ========== br> fts!) r> > com" target="_blank">www.aeroelectric.com w.buildersbooks.com" target="_blank">www.buildersbooks.com p.com" target="_blank">www.homebuilthelp.com e.com" target="_blank">www.mypilotstore.com " target="_blank">www.mrrace.com target="_blank">http://www.matronics.com/contribution -Matt Dralle, List Admin. ========== ist" target="_blank">http://www.matronics.com/Navigator?RV-List ========== FORUMS - _blank">http://forums.matronics.com ========== D============================================ ot;">www.aeroelectric.com books.com"">www.buildersbooks.com quot;">www.homebuilthelp.com quot;">www.mypilotstore.com ">www.mrrace.com ot;">http://www.matronics.com/contribution D============================================ st"">http://www.matronics.com/Navigator?RV-List D============================================ //forums.matronics.com D============================================ ________________________________ Message 7 _____________________________________ Time: 10:22:49 AM PST US Subject: Re: RV-List: Delta-Pop ADS-B antenna placement From: John Jessen Ah! Ok. Thanks. I'm very interested in this topic and product, although not sure it works with Foreflight. > On Jan 20, 2015, at 9:56 AM, Bob Leffler wrote: > > John, > > The navworx unit requires two antennas. One for the UAT and one for the G PS. The blade antenna they are talking about the UAT output which is simil ar to a transponder antenna. I wouldn't recommend locating that internally. > > Bob > > Sent from my iPhone > > On Jan 20, 2015, at 12:35 PM, John Jessen wrote: > > Inside or outside? > >> On Jan 20, 2015, at 9:19 AM, David Leonard wrote: >> >> I put mine back in the empenage without a doubbler and have not had any n oticeable issues. >> >> Dave Leonard >> >>> On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen w rote: >>> >>> Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying t o figure out where to install the antenna.... >>> >>> Since the Delta-Pop is a blade-type antenna, it will need to be mounted a long the fuselage direction of flight axis. There are a couple of places wh ere bulkheads mount to the bottom skin and are aligned correctly. I'm think ing of taking advantage of one of these bulkheads instead of mounting a doub ler plate to the underside. >>> >>> Thoughts please? >>> >>> Thanks, >>> Ralph >>> RV6A N822AR @ N06 "Patience" 240 hrs.... >>> >>> >>> >>> >>> ========== >>> br> fts!) >>> r> > com" target="_blank">www.aeroelectric.com >>> w.buildersbooks.com" target="_blank">www.buildersbooks.com >>> p.com" target="_blank">www.homebuilthelp.com >>> e.com" target="_blank">www.mypilotstore.com >>> " target="_blank">www.mrrace.com >>> target="_blank">http://www.matronics.com/contribution >>> -Matt Dralle, List Admin. >>> ========== >>> ist" target="_blank">http://www.matronics.com/Navigator?RV-List >>> ========== >>> FORUMS - >>> _blank">http://forums.matronics.com >>> ========== >>> >>> >>> >> >> >> >> > > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ot;">www.aeroelectric.com > books.com"">www.buildersbooks.com > quot;">www.homebuilthelp.com > quot;">www.mypilotstore.com > ">www.mrrace.com > ot;">http://www.matronics.com/contribution > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > st"">http://www.matronics.com/Navigator?RV-List > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > //forums.matronics.com > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 8 _____________________________________ Time: 10:37:40 AM PST US From: Bob Leffler Subject: Re: RV-List: Delta-Pop ADS-B antenna placement Nothing works with foreflight, but stratus. That's why I use wingx. Sent from my iPhone On Jan 20, 2015, at 1:22 PM, John Jessen wrote: Ah! Ok. Thanks. I'm very interested in this topic and product, although not sure it works with Foreflight. > On Jan 20, 2015, at 9:56 AM, Bob Leffler wrote: > > John, > > The navworx unit requires two antennas. One for the UAT and one for the G PS. The blade antenna they are talking about the UAT output which is simil ar to a transponder antenna. I wouldn't recommend locating that internally. > > Bob > > Sent from my iPhone > > On Jan 20, 2015, at 12:35 PM, John Jessen wrote: > > Inside or outside? > >> On Jan 20, 2015, at 9:19 AM, David Leonard wrote: >> >> I put mine back in the empenage without a doubbler and have not had any n oticeable issues. >> >> Dave Leonard >> >>> On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen w rote: >>> >>> Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying t o figure out where to install the antenna.... >>> >>> Since the Delta-Pop is a blade-type antenna, it will need to be mounted a long the fuselage direction of flight axis. There are a couple of places wh ere bulkheads mount to the bottom skin and are aligned correctly. I'm think ing of taking advantage of one of these bulkheads instead of mounting a doub ler plate to the underside. >>> >>> Thoughts please? >>> >>> Thanks, >>> Ralph >>> RV6A N822AR @ N06 "Patience" 240 hrs.... >>> >>> >>> >>> >>> ========== >>> br> fts!) >>> r> > com" target="_blank">www.aeroelectric.com >>> w.buildersbooks.com" target="_blank">www.buildersbooks.com >>> p.com" target="_blank">www.homebuilthelp.com >>> e.com" target="_blank">www.mypilotstore.com >>> " target="_blank">www.mrrace.com >>> target="_blank">http://www.matronics.com/contribution >>> -Matt Dralle, List Admin. >>> ========== >>> ist" target="_blank">http://www.matronics.com/Navigator?RV-List >>> ========== >>> FORUMS - >>> _blank">http://forums.matronics.com >>> ========== >>> >>> >>> >> >> >> >> > > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ot;">www.aeroelectric.com > books.com"">www.buildersbooks.com > quot;">www.homebuilthelp.com > quot;">www.mypilotstore.com > ">www.mrrace.com > ot;">http://www.matronics.com/contribution > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > st"">http://www.matronics.com/Navigator?RV-List > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > //forums.matronics.com > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ot;">www.aeroelectric.com > books.com"">www.buildersbooks.com > quot;">www.homebuilthelp.com > quot;">www.mypilotstore.com > ">www.mrrace.com > ot;">http://www.matronics.com/contribution > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > st"">http://www.matronics.com/Navigator?RV-List > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > //forums.matronics.com > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ________________________________ Message 9 _____________________________________ Time: 10:37:51 AM PST US From: Bob Leffler Subject: Re: RV-List: Delta-Pop ADS-B antenna placement Unfortunately that's not supported with the current navworx units. The GPS is internal to the unit. In 2016, for experimentals you be able to do the opposite. Send GPS position data to your EFIS from navworx. Other vendors may work differently. Sent from my iPhone On Jan 20, 2015, at 1:21 PM, Ralph E. Capen wrote: I'm planning on getting my position data from my 420W - so I shouldn't need the second GPS antenna...but that sounds like a good plan b place to put it. -----Original Message----- From: Bob Leffler Sent: Jan 20, 2015 12:56 PM Subject: Re: RV-List: Delta-Pop ADS-B antenna placement John, The navworx unit requires two antennas. One for the UAT and one for the GPS. The blade antenna they are talking about the UAT output which is similar to a transponder antenna. I wouldn't recommend locating that internally. Bob Sent from my iPhone On Jan 20, 2015, at 12:35 PM, John Jessen wrote: Inside or outside? On Jan 20, 2015, at 9:19 AM, David Leonard wrote: I put mine back in the empenage without a doubbler and have not had any noticeable issues. Dave Leonard On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen wrote: Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna.... Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside. Thoughts please? Thanks, Ralph RV6A N822AR @ N06 "Patience" 240 hrs.... ========== br> fts!) r> > com" target="_blank">www.aeroelectric.com w.buildersbooks.com" target="_blank">www.buildersbooks.com p.com" target="_blank">www.homebuilthelp.com e.com" target="_blank">www.mypilotstore.com " target="_blank">www.mrrace.com target="_blank">http://www.matronics.com/contribution -Matt Dralle, List Admin. ========== ist" target="_blank">http://www.matronics.com/Navigator?RV-List ========== FORUMS - _blank">http://forums.matronics.com ========== D============================================ ot;">www.aeroelectric.com books.com"">www.buildersbooks.com quot;">www.homebuilthelp.com quot;">www.mypilotstore.com ">www.mrrace.com ot;">http://www.matronics.com/contribution D============================================ st"">http://www.matronics.com/Navigator?RV-List D============================================ //forums.matronics.com D============================================ ________________________________ Message 10 ____________________________________ Time: 10:58:08 AM PST US From: John Jessen Subject: Re: RV-List: Delta-Pop ADS-B antenna placement Yes, I'd probably have to switch over. I don't like WingX, but could get use d to it, I suppose. On Jan 20, 2015, at 10:36 AM, Bob Leffler wrote: > Nothing works with foreflight, but stratus. That's why I use wingx. > > Sent from my iPhone > > On Jan 20, 2015, at 1:22 PM, John Jessen wrote: > > Ah! Ok. Thanks. I'm very interested in this topic and product, although n ot sure it works with Foreflight. > > > > On Jan 20, 2015, at 9:56 AM, Bob Leffler wrote: > >> John, >> >> The navworx unit requires two antennas. One for the UAT and one for the G PS. The blade antenna they are talking about the UAT output which is simil ar to a transponder antenna. I wouldn't recommend locating that internally. >> >> Bob >> >> Sent from my iPhone >> >> On Jan 20, 2015, at 12:35 PM, John Jessen wrote: >> >> Inside or outside? >> >> On Jan 20, 2015, at 9:19 AM, David Leonard wrote: >> >>> I put mine back in the empenage without a doubbler and have not had any n oticeable issues. >>> >>> Dave Leonard >>> >>> On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen w rote: >>>> >>>> Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying t o figure out where to install the antenna.... >>>> >>>> Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places w here bulkheads mount to the bottom skin and are aligned correctly. I'm thin king of taking advantage of one of these bulkheads instead of mounting a dou bler plate to the underside. >>>> >>>> Thoughts please? >>>> >>>> Thanks, >>>> Ralph >>>> RV6A N822AR @ N06 "Patience" 240 hrs.... >>>> >>>> >>>> >>>> >>>> ========== >>>> br> fts!) >>>> r> > com" target="_blank">www.aeroelectric.com >>>> w.buildersbooks.com" target="_blank">www.buildersbooks.com >>>> p.com" target="_blank">www.homebuilthelp.com >>>> e.com" target="_blank">www.mypilotstore.com >>>> " target="_blank">www.mrrace.com >>>> target="_blank">http://www.matronics.com/contribution >>>> -Matt Dralle, List Admin. >>>> ========== >>>> ist" target="_blank">http://www.matronics.com/Navigator?RV-List >>>> ========== >>>> FORUMS - >>>> _blank">http://forums.matronics.com >>>> ========== >>> >> >> >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> ot;">www.aeroelectric.com >> books.com"">www.buildersbooks.com >> quot;">www.homebuilthelp.com >> quot;">www.mypilotstore.com >> ">www.mrrace.com >> ot;">http://www.matronics.com/contribution >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> st"">http://www.matronics.com/Navigator?RV-List >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> //forums.matronics.com >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> >> >> >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> ot;">www.aeroelectric.com >> books.com"">www.buildersbooks.com >> quot;">www.homebuilthelp.com >> quot;">www.mypilotstore.com >> ">www.mrrace.com >> ot;">http://www.matronics.com/contribution >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> st"">http://www.matronics.com/Navigator?RV-List >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> //forums.matronics.com >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> > > > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ot;">www.aeroelectric.com > books.com"">www.buildersbooks.com > quot;">www.homebuilthelp.com > quot;">www.mypilotstore.com > ">www.mrrace.com > ot;">http://www.matronics.com/contribution > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > st"">http://www.matronics.com/Navigator?RV-List > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > //forums.matronics.com > D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 11 ____________________________________ Time: 11:24:11 AM PST US Subject: Re: RV-List: Delta-Pop ADS-B antenna placement From: David Leonard Outside lower, of course, just like a blade xpdr antenna. Nothing special to see in a picture. I did not use a doubler (like I did for my ship comm antenna) because the forces are relatively small the fore/aft mounting holes will not allow for twisting of the skin the way a single hole would. My GPS antenna is top interior with a view of the sky just like the other satellite antennas. I like my Navworx. I have had it installed for 2 years now. Was worth purchasing early (long before 2020). I use it with an e-ink/lcd (pixel Qi - the more sunlight the easier to read) windows tablet (solid state hard drive, not an HHD) and Chartflier software. The system just needs to have audible traffic alerts from either the software or the Navworx. Seems easy enough to do but still not available. Dave Leonard On Tue, Jan 20, 2015 at 9:35 AM, John Jessen wrote: > Inside or outside? > > On Jan 20, 2015, at 9:19 AM, David Leonard wrote: > > I put mine back in the empenage without a doubbler and have not had any > noticeable issues. > > Dave Leonard > > On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen > wrote: > >> >> Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to >> figure out where to install the antenna.... >> >> Since the Delta-Pop is a blade-type antenna, it will need to be mounted >> along the fuselage direction of flight axis. There are a couple of places >> where bulkheads mount to the bottom skin and are aligned correctly. I'm >> thinking of taking advantage of one of these bulkheads instead of mounting >> a doubler plate to the underside. >> >> Thoughts please? >> >> Thanks, >> Ralph >> RV6A N822AR @ N06 "Patience" 240 hrs.... >> >> >> >> >> ========== >> br> fts!) >> r> > com" target="_blank">www.aeroelectric.com >> w.buildersbooks.com" target="_blank">www.buildersbooks.com >> p.com" target="_blank">www.homebuilthelp.com >> e.com" target="_blank">www.mypilotstore.com >> " target="_blank">www.mrrace.com >> target="_blank">http://www.matronics.com/contribution >> -Matt Dralle, List Admin. >> ========== >> ist" target="_blank">http://www.matronics.com/Navigator?RV-List >> ========== >> FORUMS - >> _blank">http://forums.matronics.com >> ========== >> >> >> >> > > > * > > > * > > ________________________________ Message 12 ____________________________________ Time: 11:58:25 AM PST US Subject: Re: RV-List: Delta-Pop ADS-B antenna placement From: Larry Bowen I recently switched to Garmin Pilot because I didn't want to be tied to Stratus (with Foreflight). GP has been good overall, though I have to admit Foreflight seems to set the pace of innovation when it comes to this class of apps on the ipad. -- Larry Bowen Larry@BowenAero.com http://BowenAero.com On Tue, Jan 20, 2015 at 2:23 PM, David Leonard wrote: > Outside lower, of course, just like a blade xpdr antenna. Nothing special > to see in a picture. I did not use a doubler (like I did for my ship comm > antenna) because the forces are relatively small the fore/aft mounting > holes will not allow for twisting of the skin the way a single hole would. > > My GPS antenna is top interior with a view of the sky just like the other > satellite antennas. > > I like my Navworx. I have had it installed for 2 years now. Was worth > purchasing early (long before 2020). I use it with an e-ink/lcd (pixel Qi > - the more sunlight the easier to read) windows tablet (solid state hard > drive, not an HHD) and Chartflier software. > > The system just needs to have audible traffic alerts from either the > software or the Navworx. Seems easy enough to do but still not available. > > Dave Leonard > > On Tue, Jan 20, 2015 at 9:35 AM, John Jessen wrote: > >> Inside or outside? >> >> On Jan 20, 2015, at 9:19 AM, David Leonard wrote: >> >> I put mine back in the empenage without a doubbler and have not had any >> noticeable issues. >> >> Dave Leonard >> >> On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen >> wrote: >> >>> >>> Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying >>> to figure out where to install the antenna.... >>> >>> Since the Delta-Pop is a blade-type antenna, it will need to be mounted >>> along the fuselage direction of flight axis. There are a couple of places >>> where bulkheads mount to the bottom skin and are aligned correctly. I'm >>> thinking of taking advantage of one of these bulkheads instead of mounting >>> a doubler plate to the underside. >>> >>> Thoughts please? >>> >>> Thanks, >>> Ralph >>> RV6A N822AR @ N06 "Patience" 240 hrs.... >>> >>> >>> >>> >>> ========== >>> br> fts!) >>> r> > com" target="_blank">www.aeroelectric.com >>> w.buildersbooks.com" target="_blank">www.buildersbooks.com >>> p.com" target="_blank">www.homebuilthelp.com >>> e.com" target="_blank">www.mypilotstore.com >>> " target="_blank">www.mrrace.com >>> target="_blank">http://www.matronics.com/contribution >>> -Matt Dralle, List Admin. >>> ========== >>> ist" target="_blank">http://www.matronics.com/Navigator?RV-List >>> ========== >>> FORUMS - >>> _blank">http://forums.matronics.com >>> ========== >>> >>> >>> >>> >> >> >> * >> >> 3D============================================ >> 3D============================================ >> 3D============================================ >> 3D============================================ >> >> * >> >> > * > > > * > > ________________________________ Message 13 ____________________________________ Time: 12:33:45 PM PST US From: Tim Olson Subject: Re: RV-List: Delta-Pop ADS-B antenna placement For what it's worth, the RV-14 (unless I missed something in construction) doesn't use doublers for the UAT and Transponder antennas, but it does for the 2 COM antennas. If true, then I don't think Van's thinks you need one for the blades. I'm still considering if I should add one, but with the fairly low drag maybe it's not worth worrying about it. Tim ________________________________ Message 14 ____________________________________ Time: 04:18:52 PM PST US From: Jim Clark Subject: RV-List: Re: RV-List Digest: 0 Msgs - 01/19/15 Please stop sending emails! Sent from AOL Mobile Mail -----Original Message----- From: RV-List Digest Server Sent: Tue, Jan 20, 2015 12:15 AM Subject: RV-List Digest: 0 Msgs - 01/19/15
*

 =================================================
   Online Versions of Today's List Digest Archive
 =================================================

Today's complete RV-List Digest can also be found in either of the 
two Web Links listed below.  The .html file includes the Digest formatted 
in HTML for viewing with a web browser and features Hyperlinked Indexes 
and Message Navigation.  The .txt file includes the plain ASCII version 
of the RV-List Digest and can be viewed with a generic text editor 
such as Notepad or with a web browser. 

HTML Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 15-01-19&Archive=RV

Text Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 15-01-19&Archive=RV


 ===============================================
   EMail Version of Today's List Digest Archive
 ===============================================


    ----------------------------------------------------------
                     RV-List Digest Archive
                                      ---
              Total Messages Posted Mon 01/19/15: 0
           ----------------------------------------------------------


Today's Message Index:
----------------------


________________________________ Message 15 ____________________________________ Time: 06:20:40 PM PST US Subject: Re: RV-List: Re: RV-List Digest: 0 Msgs - 01/19/15 From: Dale Ensing Jim, you must un- subscribe. Go to bottom of message and look for instructio n. Dale Ensing On Jan 20, 2015, at 19:18, Jim Clark wrote: > Please stop sending emails! > > > Sent from AOL Mobile Mail > > > -----Original Message----- > From: RV-List Digest Server > To: RV-List Digest List > Sent: Tue, Jan 20, 2015 12:15 AM > Subject: RV-List Digest: 0 Msgs - 01/19/15 > > > * > > ========================= ======================== > Online Versions of Today's List Digest Archive > ========================= ======================== > > Today's complete RV-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the RV-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=ht ml&Chapter 15-01-19&Archive=RV > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=tx t&Chapter 15-01-19&Archive=RV > > > ========================= ====================== > EMail Version of Today's List Digest Archive > ========================= ====================== > > > ---------------------------------------------------------- > RV-List Digest Archive > --- > Total Messages Posted Mon 01/19/15: 0 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > > > > > > > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.