Today's Message Index:
----------------------
1. 08:11 AM - Tru-Trak roll servo in 6/6A wing (Ralph E. Capen)
2. 08:26 AM - Re: Tru-Trak roll servo in 6/6A wing (RV6 Flyer)
3. 10:53 AM - Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing (Ralph E. Capen)
4. 11:41 AM - Re: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing (bigdog@bentwing.com)
5. 01:03 PM - Re: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing (Ralph E. Capen)
6. 03:12 PM - Re: Re: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing (Thomas Doran)
7. 03:33 PM - Re: Tru-Trak roll servo in 6/6A wing ()
8. 04:35 PM - Re: Tru-Trak roll servo in 6/6A wing (Ralph E. Capen)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Tru-Trak roll servo in 6/6A wing |
Anyone have a TruTrak servo installed in the wing?
>From memory, there previously was a wing bracket - but not currently. Looking
for drawings to make the wing install bracket - the place under the seats has
too much other difficult to relocate stuff...
Thanks,
Ralph Capen
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Tru-Trak roll servo in 6/6A wing |
Years ago, I have seen an RV-6 that had the servo mounted in the wingtip.
Gary A. Sobek
"My Sanity" RV-6 N157GS O-320 Hartzell,
3,100+ Flying Hours Pennsylvania, USA
________________________________________
From: owner-rv-list-server@matronics.com <owner-rv-list-server@matronics.com> on
behalf of Ralph E. Capen <recapen@earthlink.net>
Sent: Monday, May 16, 2016 3:09 PM
Subject: RV-List: Tru-Trak roll servo in 6/6A wing
Anyone have a TruTrak servo installed in the wing?
>From memory, there previously was a wing bracket - but not currently. Looking
for drawings to make the wing install bracket - the place under the seats has
too much other difficult to relocate stuff...
Thanks,
Ralph Capen
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing |
Thanks Dan - I already had those drawings...
The 6/6A wing is different internally - they built the bellcrank with a different
method.
I now have the three drawings for the 6/6A left wing- but are still looking for
the details for the "Servo Mount Bracket" referenced in those drawings. I suppose
I could cobble something together but was trying to go with what already
worked.
Anyone with details on the "Servo Mount Bracket" - help would be greatly appreciated.
Ralph
-----Original Message-----
From: "dbygroups@gmail.com [RV7A]"
Sent: May 16, 2016 11:34 AM
Subject: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing
Ralph...
The drawings I think you want (for a 7 in the right wing) are at http://www.trutrakap.com/wp-content/uploads/2014/03/RV-710RightWing.pdf
Dan
__._,_.___
Posted by: dbygroups@gmail.com
Want more RV news? Sign up for the RV Builder's Hotline. It's free!
http://rvbuildershotline.com
Visit Your Group
Privacy Unsubscribe Terms of Use
__,_._,___
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo |
in 6/6A wing
I'm guessing you've checked with Tru-Trak? They seemed to try hard to accommodate
all installs back then. When I was planning to add the roll servo to my -6
I thought I'd mount it in the wing and use the -7 mount. I don't remember any
one talking about problems with it but did not investigate it that deeply as
I decided to go with the under seat mount. If it helps I don't see any reason
why you couldn't mount it under either seat. You could also consider the Navaid
approach and mount the servo in the wingtip with a long pushrod to the bellcrank.
I've got the mount and pushrod from my 1st RV-6 if you want to see how that
worked.
Greg Young
-----Original Message-----
From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Ralph E. Capen
Sent: Monday, May 16, 2016 12:53 PM
Subject: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing
--> Avionics-List message posted by: "Ralph E. Capen"
--> <recapen@earthlink.net>
Thanks Dan - I already had those drawings...
The 6/6A wing is different internally - they built the bellcrank with a different
method.
I now have the three drawings for the 6/6A left wing- but are still looking for
the details for the "Servo Mount Bracket" referenced in those drawings. I suppose
I could cobble something together but was trying to go with what already
worked.
Anyone with details on the "Servo Mount Bracket" - help would be greatly appreciated.
Ralph
-----Original Message-----
From: "dbygroups@gmail.com [RV7A]"
Sent: May 16, 2016 11:34 AM
Subject: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing
Ralph...
The drawings I think you want (for a 7 in the right wing) are at http://www.trutrakap.com/wp-content/uploads/2014/03/RV-710RightWing.pdf
Dan
__._,_.___
Posted by: dbygroups@gmail.com
Want more RV news? Sign up for the RV Builder's Hotline. It's free!
http://rvbuildershotline.com
Visit Your Group
Privacy Unsubscribe Terms of Use
__,_._,___
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo |
in 6/6A wing
Thanks Greg - I'll zap you directly!
-----Original Message-----
>From: "bigdog@bentwing.com" <bigdog@bentwing.com>
>Sent: May 16, 2016 2:39 PM
>To: "avionics-list@matronics.com" <avionics-list@matronics.com>, rv-list <rv-list@matronics.com>
>Subject: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A
wing
>
>--> Avionics-List message posted by: "bigdog@bentwing.com" <bigdog@bentwing.com>
>
>I'm guessing you've checked with Tru-Trak? They seemed to try hard to accommodate
all installs back then. When I was planning to add the roll servo to my -6
I thought I'd mount it in the wing and use the -7 mount. I don't remember any
one talking about problems with it but did not investigate it that deeply as
I decided to go with the under seat mount. If it helps I don't see any reason
why you couldn't mount it under either seat. You could also consider the Navaid
approach and mount the servo in the wingtip with a long pushrod to the bellcrank.
I've got the mount and pushrod from my 1st RV-6 if you want to see how
that worked.
>
>Greg Young
>
>-----Original Message-----
>From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Ralph E. Capen
>Sent: Monday, May 16, 2016 12:53 PM
>To: rv-list <rv-list@matronics.com>; avionics-list@matronics.com
>Subject: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing
>
>--> Avionics-List message posted by: "Ralph E. Capen"
>--> <recapen@earthlink.net>
>
>Thanks Dan - I already had those drawings...
>
>The 6/6A wing is different internally - they built the bellcrank with a different
method.
>
>I now have the three drawings for the 6/6A left wing- but are still looking for
the details for the "Servo Mount Bracket" referenced in those drawings. I suppose
I could cobble something together but was trying to go with what already
worked.
>
>Anyone with details on the "Servo Mount Bracket" - help would be greatly appreciated.
>
>Ralph
>
>-----Original Message-----
>
>From: "dbygroups@gmail.com [RV7A]"
>
>Sent: May 16, 2016 11:34 AM
>
>To: RV7A@yahoogroups.com
>
>Subject: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing
>
>
>
>
>
>
>Ralph...
>
>The drawings I think you want (for a 7 in the right wing) are at http://www.trutrakap.com/wp-content/uploads/2014/03/RV-710RightWing.pdf
>
>Dan
>
>
>__._,_.___
>
>
>
>
>
>
>
> Posted by: dbygroups@gmail.com
>
>
>
>Want more RV news? Sign up for the RV Builder's Hotline. It's free!
>
>http://rvbuildershotline.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Visit Your Group
>
>
>
>
>
>
>
> Privacy Unsubscribe Terms of Use
>
>
>
>
>
>
>
>
>
>
>__,_._,___
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo |
in 6/6A wing
I have a TruTrak Digitrack and the roll servo kit for a 6 that i bought back in
2005, but never installed. Both are new in the box.
There are installation drawings for the roll servo in a RV 6 and the Installation
and Users Guide.
I actually forgot that I had these till about a year ago.
If anyone is interested, I would love to sell. I now fly an RV-8 with a Dynon
autopilot.
Tom
> On May 16, 2016, at 4:02 PM, Ralph E. Capen <recapen@earthlink.net> wrote:
>
>
>
> Thanks Greg - I'll zap you directly!
>
>
>
>
> -----Original Message-----
>> From: "bigdog@bentwing.com" <bigdog@bentwing.com>
>> Sent: May 16, 2016 2:39 PM
>> To: "avionics-list@matronics.com" <avionics-list@matronics.com>, rv-list <rv-list@matronics.com>
>> Subject: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A
wing
>>
>> --> Avionics-List message posted by: "bigdog@bentwing.com" <bigdog@bentwing.com>
>>
>> I'm guessing you've checked with Tru-Trak? They seemed to try hard to accommodate
all installs back then. When I was planning to add the roll servo to my
-6 I thought I'd mount it in the wing and use the -7 mount. I don't remember
any one talking about problems with it but did not investigate it that deeply
as I decided to go with the under seat mount. If it helps I don't see any reason
why you couldn't mount it under either seat. You could also consider the Navaid
approach and mount the servo in the wingtip with a long pushrod to the bellcrank.
I've got the mount and pushrod from my 1st RV-6 if you want to see how
that worked.
>>
>> Greg Young
>>
>> -----Original Message-----
>> From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Ralph E. Capen
>> Sent: Monday, May 16, 2016 12:53 PM
>> To: rv-list <rv-list@matronics.com>; avionics-list@matronics.com
>> Subject: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing
>>
>> --> Avionics-List message posted by: "Ralph E. Capen"
>> --> <recapen@earthlink.net>
>>
>> Thanks Dan - I already had those drawings...
>>
>> The 6/6A wing is different internally - they built the bellcrank with a different
method.
>>
>> I now have the three drawings for the 6/6A left wing- but are still looking
for the details for the "Servo Mount Bracket" referenced in those drawings. I
suppose I could cobble something together but was trying to go with what already
worked.
>>
>> Anyone with details on the "Servo Mount Bracket" - help would be greatly appreciated.
>>
>> Ralph
>>
>> -----Original Message-----
>>
>> From: "dbygroups@gmail.com [RV7A]"
>>
>> Sent: May 16, 2016 11:34 AM
>>
>> To: RV7A@yahoogroups.com
>>
>> Subject: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Ralph...
>>
>> The drawings I think you want (for a 7 in the right wing) are at http://www.trutrakap.com/wp-content/uploads/2014/03/RV-710RightWing.pdf
>>
>> Dan
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> __._,_.___
>>
>>
>>
>>
>>
>>
>>
>> Posted by: dbygroups@gmail.com
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Want more RV news? Sign up for the RV Builder's Hotline. It's free!
>>
>> http://rvbuildershotline.com
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Visit Your Group
>>
>>
>>
>>
>>
>>
>>
>>
>> Privacy Unsubscribe Terms of Use
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> __,_._,___
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
____________________________________________________________
The New York Times
Run On A Ticket With Trump? No, Thank You, Many Republicans Say
http://thirdpartyoffers.juno.com/TGL3141/573a454a287f04549363dst03duc
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Tru-Trak roll servo in 6/6A wing |
Sam Buchanan's website of his RV-6 build shows a wingtip servo installation
retrofit...
-----Original Message-----
From: RV6 Flyer
Sent: Monday, May 16, 2016 11:25 AM
Subject: Re: RV-List: Tru-Trak roll servo in 6/6A wing
Years ago, I have seen an RV-6 that had the servo mounted in the wingtip.
Gary A. Sobek
"My Sanity" RV-6 N157GS O-320 Hartzell,
3,100+ Flying Hours Pennsylvania, USA
________________________________________
From: owner-rv-list-server@matronics.com
<owner-rv-list-server@matronics.com> on behalf of Ralph E. Capen
<recapen@earthlink.net>
Sent: Monday, May 16, 2016 3:09 PM
Subject: RV-List: Tru-Trak roll servo in 6/6A wing
Anyone have a TruTrak servo installed in the wing?
>From memory, there previously was a wing bracket - but not currently.
>Looking for drawings to make the wing install bracket - the place under the
>seats has too much other difficult to relocate stuff...
Thanks,
Ralph Capen
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Tru-Trak roll servo in 6/6A wing |
Thanks!
-----Original Message-----
>From: kboatright1@comcast.net
>Sent: May 16, 2016 6:32 PM
>To: rv-list@matronics.com
>Subject: Re: RV-List: Tru-Trak roll servo in 6/6A wing
>
>
>Sam Buchanan's website of his RV-6 build shows a wingtip servo installation
>retrofit...
>
>-----Original Message-----
>From: RV6 Flyer
>Sent: Monday, May 16, 2016 11:25 AM
>To: rv-list@matronics.com
>Subject: Re: RV-List: Tru-Trak roll servo in 6/6A wing
>
>
>Years ago, I have seen an RV-6 that had the servo mounted in the wingtip.
>
>Gary A. Sobek
>"My Sanity" RV-6 N157GS O-320 Hartzell,
>3,100+ Flying Hours Pennsylvania, USA
>
>________________________________________
>From: owner-rv-list-server@matronics.com
><owner-rv-list-server@matronics.com> on behalf of Ralph E. Capen
><recapen@earthlink.net>
>Sent: Monday, May 16, 2016 3:09 PM
>To: rv-list; avionics-list@matronics.com
>Subject: RV-List: Tru-Trak roll servo in 6/6A wing
>
>
>Anyone have a TruTrak servo installed in the wing?
>>From memory, there previously was a wing bracket - but not currently.
>>Looking for drawings to make the wing install bracket - the place under the
>>seats has too much other difficult to relocate stuff...
>
>Thanks,
>Ralph Capen
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|