Today's Message Index:
----------------------
1. 07:02 AM - MX-20 Software (Ralph E. Capen)
2. 07:57 AM - Re: MX-20 Software (Bill Moffitt)
3. 09:38 AM - Re: MX-20 Software (Ralph E. Capen)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Anyone out there running a MX-20 with a 400W/500W series GPS?
I recently upgraded the software on my GNC420W in preparation for ADS-B upgrade
interface to a NAVWORX ADS600B. Now the MX-20 will only display current position
when a flight plan is active in the GNC420W. Previously, it would display
current position as long as the GNC420W was getting a good GPS signal.
I think the software is actually on the data card and not in the machine - so it
should be easy to get the software upgraded.
I need to check my software revision - I think I am at version 5.5...knowing that
there is at least a version 5.7 floating around.
Anyone have a spare card I can borrow to test in order to see if the new software
will help?
Thanks,
Ralph Capen
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Ralph,
We can loan you our 5.7 card; contact sales@navworx.com if interested.
Best Regards,
Bill Moffitt
NavWorx Incorporated
888-628-9679
(972) 372-0768 (direct)
469-644-2459 (cell)
469-327-2683 (fax)
-----Original Message-----
From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen
Sent: Tuesday, June 21, 2016 9:01 AM
Subject: RV-List: MX-20 Software
Anyone out there running a MX-20 with a 400W/500W series GPS?
I recently upgraded the software on my GNC420W in preparation for ADS-B upgrade
interface to a NAVWORX ADS600B. Now the MX-20 will only display current position
when a flight plan is active in the GNC420W. Previously, it would display
current position as long as the GNC420W was getting a good GPS signal.
I think the software is actually on the data card and not in the machine - so it
should be easy to get the software upgraded.
I need to check my software revision - I think I am at version 5.5...knowing that
there is at least a version 5.7 floating around.
Anyone have a spare card I can borrow to test in order to see if the new software
will help?
Thanks,
Ralph Capen
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Thanks to Bill for hopefully keeping me going!
This will actually support the integration of a new NAVWORX ADS600B!
-----Original Message-----
>From: Bill Moffitt <BillMoffitt@navworx.com>
>Sent: Jun 21, 2016 10:46 AM
>To: "rv-list@matronics.com" <rv-list@matronics.com>
>Subject: RE: RV-List: MX-20 Software
>
>
>Ralph,
>
>We can loan you our 5.7 card; contact sales@navworx.com if interested.
>
>
>Best Regards,
>
>Bill Moffitt
>NavWorx Incorporated
>888-628-9679
>(972) 372-0768 (direct)
>469-644-2459 (cell)
>469-327-2683 (fax)
>
>
>-----Original Message-----
>From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen
>Sent: Tuesday, June 21, 2016 9:01 AM
>To: rv-list
>Subject: RV-List: MX-20 Software
>
>
>Anyone out there running a MX-20 with a 400W/500W series GPS?
>
>I recently upgraded the software on my GNC420W in preparation for ADS-B upgrade
interface to a NAVWORX ADS600B. Now the MX-20 will only display current position
when a flight plan is active in the GNC420W. Previously, it would display
current position as long as the GNC420W was getting a good GPS signal.
>
>I think the software is actually on the data card and not in the machine - so
it should be easy to get the software upgraded.
>
>I need to check my software revision - I think I am at version 5.5...knowing that
there is at least a version 5.7 floating around.
>
>Anyone have a spare card I can borrow to test in order to see if the new software
will help?
>
>Thanks,
>Ralph Capen
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|