---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Tue 06/21/16: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:02 AM - MX-20 Software (Ralph E. Capen) 2. 07:57 AM - Re: MX-20 Software (Bill Moffitt) 3. 09:38 AM - Re: MX-20 Software (Ralph E. Capen) ________________________________ Message 1 _____________________________________ Time: 07:02:09 AM PST US From: "Ralph E. Capen" Subject: RV-List: MX-20 Software Anyone out there running a MX-20 with a 400W/500W series GPS? I recently upgraded the software on my GNC420W in preparation for ADS-B upgrade interface to a NAVWORX ADS600B. Now the MX-20 will only display current position when a flight plan is active in the GNC420W. Previously, it would display current position as long as the GNC420W was getting a good GPS signal. I think the software is actually on the data card and not in the machine - so it should be easy to get the software upgraded. I need to check my software revision - I think I am at version 5.5...knowing that there is at least a version 5.7 floating around. Anyone have a spare card I can borrow to test in order to see if the new software will help? Thanks, Ralph Capen ________________________________ Message 2 _____________________________________ Time: 07:57:43 AM PST US From: Bill Moffitt Subject: RE: RV-List: MX-20 Software Ralph, We can loan you our 5.7 card; contact sales@navworx.com if interested. Best Regards, Bill Moffitt NavWorx Incorporated 888-628-9679 (972) 372-0768 (direct) 469-644-2459 (cell) 469-327-2683 (fax) -----Original Message----- From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen Sent: Tuesday, June 21, 2016 9:01 AM Subject: RV-List: MX-20 Software Anyone out there running a MX-20 with a 400W/500W series GPS? I recently upgraded the software on my GNC420W in preparation for ADS-B upgrade interface to a NAVWORX ADS600B. Now the MX-20 will only display current position when a flight plan is active in the GNC420W. Previously, it would display current position as long as the GNC420W was getting a good GPS signal. I think the software is actually on the data card and not in the machine - so it should be easy to get the software upgraded. I need to check my software revision - I think I am at version 5.5...knowing that there is at least a version 5.7 floating around. Anyone have a spare card I can borrow to test in order to see if the new software will help? Thanks, Ralph Capen ________________________________ Message 3 _____________________________________ Time: 09:38:06 AM PST US From: "Ralph E. Capen" Subject: RE: RV-List: MX-20 Software Thanks to Bill for hopefully keeping me going! This will actually support the integration of a new NAVWORX ADS600B! -----Original Message----- >From: Bill Moffitt >Sent: Jun 21, 2016 10:46 AM >To: "rv-list@matronics.com" >Subject: RE: RV-List: MX-20 Software > > >Ralph, > >We can loan you our 5.7 card; contact sales@navworx.com if interested. > > >Best Regards, > >Bill Moffitt >NavWorx Incorporated >888-628-9679 >(972) 372-0768 (direct) >469-644-2459 (cell) >469-327-2683 (fax) > > >-----Original Message----- >From: owner-rv-list-server@matronics.com [mailto:owner-rv-list-server@matronics.com] On Behalf Of Ralph E. Capen >Sent: Tuesday, June 21, 2016 9:01 AM >To: rv-list >Subject: RV-List: MX-20 Software > > >Anyone out there running a MX-20 with a 400W/500W series GPS? > >I recently upgraded the software on my GNC420W in preparation for ADS-B upgrade interface to a NAVWORX ADS600B. Now the MX-20 will only display current position when a flight plan is active in the GNC420W. Previously, it would display current position as long as the GNC420W was getting a good GPS signal. > >I think the software is actually on the data card and not in the machine - so it should be easy to get the software upgraded. > >I need to check my software revision - I think I am at version 5.5...knowing that there is at least a version 5.7 floating around. > >Anyone have a spare card I can borrow to test in order to see if the new software will help? > >Thanks, >Ralph Capen > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.