---------------------------------------------------------- RV-List Digest Archive --- Total Messages Posted Sun 12/04/16: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:55 AM - Hole deburring tool (whodja) 2. 07:28 AM - Re: Hole deburring tool (RV6 Flyer) 3. 08:09 AM - Re: Hole deburring tool (Linn Walters) 4. 11:50 AM - Re: Hole deburring tool (Stan Jones) 5. 12:13 PM - Re: Hole deburring tool (Charlie England) 6. 01:30 PM - Re: Hole deburring tool (vanremog@aol.com) ________________________________ Message 1 _____________________________________ Time: 06:55:12 AM PST US Subject: RV-List: Hole deburring tool From: "whodja" I had a very small deburring tool. I'm looking for a source to by another one. I've checked the usual sites. Unfortunately I think it came with tools I bought from a builder years ago. It was very short and great for small spaces. Any recommendations are greatly appreciated. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=463671#463671 ________________________________ Message 2 _____________________________________ Time: 07:28:34 AM PST US From: RV6 Flyer Subject: Re: RV-List: Hole deburring tool A photo would be helpful to know what it is you are looking for. Your description brings to mind the Cogsdill deburring tool. The Yard Stor e sells them along with replacement blades. http://www.yardstore.com/deburring-tools/deburr-tools-in-out.html [http://www.yardstore.com/media/catalog/product/cache/1/small_image/232x168 /9df78eab33525d08d6e5fb8d27136e95/1/4/14840.jpg] Deburr Tools - In & Out - Deburring Tools www.yardstore.com Roloc Disc Holders; Roloc Sanding Discs; Roloc Surface Cond Discs; Turn On Disc Holders; Turn On Sanding Discs; Turn On Surface Cond Disc Gary A. Sobek "My Sanity" RV-6 N157GS O-320 Hartzell, 3,200+ Flying Hours Pennsylvania, USA ________________________________ From: owner-rv-list-server@matronics.com on behalf of whodja Sent: Sunday, December 4, 2016 2:54:45 PM Subject: RV-List: Hole deburring tool I had a very small deburring tool. I'm looking for a source to by another o ne. I've checked the usual sites. Unfortunately I think it came with tools I bought from a builder years ago. It was very short and great for small sp aces. Any recommendations are greatly appreciated. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=463671#463671 rsbooks.com> m> > ________________________________ Message 3 _____________________________________ Time: 08:09:11 AM PST US Subject: Re: RV-List: Hole deburring tool From: Linn Walters http://www.cleavelandtool.com has acquired Avery's tool line. They have 3 deburring bits that fit my hex battery screw driver. Search for 'deburring'. Linn On 12/4/2016 10:28 AM, RV6 Flyer wrote: > > A photo would be helpful to know what it is you are looking for. > > > Your description brings to mind the Cogsdill deburring tool. The Yard > Store sells them along with replacement blades. > > http://www.yardstore.com/deburring-tools/deburr-tools-in-out.html > > > Deburr Tools - In & Out - Deburring Tools > > www.yardstore.com > Roloc Disc Holders; Roloc Sanding Discs; Roloc Surface Cond Discs; > Turn On Disc Holders; Turn On Sanding Discs; Turn On Surface Cond Disc > > > Gary A. Sobek > "My Sanity" RV-6 N157GS O-320 Hartzell, > 3,200+ Flying Hours Pennsylvania, USA > ------------------------------------------------------------------------ > *From:* owner-rv-list-server@matronics.com > on behalf of whodja > > *Sent:* Sunday, December 4, 2016 2:54:45 PM > *To:* rv-list@matronics.com > *Subject:* RV-List: Hole deburring tool > > I had a very small deburring tool. I'm looking for a source to by > another one. I've checked the usual sites. Unfortunately I think it > came with tools I bought from a builder years ago. It was very short > and great for small spaces. Any recommendations are greatly appreciated. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=463671#463671 > > > ========== > Month -- > Some AWESOME FREE Gifts!) > r> tric.com">www.aeroelectric.com > ww.buildersbooks.com">www.buildersbooks.com > lthelp.com">www.homebuilthelp.com > tstore.com">www.mypilotstore.com > e.com">www.mrrace.com > http://www.matronics.com/contribution > p; -Matt Dralle, List Admin. > ========== > mail Forum - > ist">http://www.matronics.com/Navigator?RV-List > ========== > p; - MATRONICS WEB FORUMS - > ums.matronics.com > ========== > p; - NEW MATRONICS LIST WIKI - > matronics.com > ========== > p; - List Contribution Web Site - > p; -Matt Dralle, List Admin. > http://www.matronics.com/contribution > ========== > > ________________________________ Message 4 _____________________________________ Time: 11:50:55 AM PST US Subject: Re: RV-List: Hole deburring tool From: Stan Jones I found the best debuting tool was a 3/8 drill with tape around the shank and twirled with your fingers. I did the whole of my project with this. Stan Jones. Sent from my iPad > On 5/12/2016, at 3:54 AM, whodja wrote: > > > I had a very small deburring tool. I'm looking for a source to by another one. I've checked the usual sites. Unfortunately I think it came with tools I bought from a builder years ago. It was very short and great for small spaces. Any recommendations are greatly appreciated. > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=463671#463671 > > > > > > > > > ________________________________ Message 5 _____________________________________ Time: 12:13:33 PM PST US From: Charlie England Subject: Re: RV-List: Hole deburring tool I do use regular deburring tools ('single flute' is best) for convenience, but agree that a drill bit is better suited for the actual deburring task than purpose-built tools. The 135 degree angle makes it less likely to actually countersink the hole while intending to just debur a curled up lip. Charlie On Sun, Dec 4, 2016 at 1:50 PM, Stan Jones wrote: > > I found the best debuting tool was a 3/8 drill with tape around the shank > and twirled with your fingers. I did the whole of my project with this. > Stan Jones. > > Sent from my iPad > > > On 5/12/2016, at 3:54 AM, whodja wrote: > > > > > > I had a very small deburring tool. I'm looking for a source to by > another one. I've checked the usual sites. Unfortunately I think it came > with tools I bought from a builder years ago. It was very short and great > for small spaces. Any recommendations are greatly appreciated. > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=463671#463671 > > > > ________________________________ Message 6 _____________________________________ Time: 01:30:19 PM PST US From: vanremog@aol.com Subject: Re: RV-List: Hole deburring tool The biggest problem I see with using a drill bit as a deburring tool is that it doesn't break a smooth edge. This can create stress risers as the holes are dimpled that may propagate into cracks in service. YMMV -GV -----Original Message----- From: Charlie England Sent: Sun, Dec 4, 2016 12:14 pm Subject: Re: RV-List: Hole deburring tool I do use regular deburring tools ('single flute' is best) for convenience, but agree that a drill bit is better suited for the actual deburring task than purpose-built tools. The 135 degree angle makes it less likely to actually countersink the hole while intending to just debur a curled up lip. Charlie On Sun, Dec 4, 2016 at 1:50 PM, Stan Jones wrote: I found the best debuting tool was a 3/8 drill with tape around the shank and twirled with your fingers. I did the whole of my project with this. Stan Jones. Sent from my iPad > On 5/12/2016, at 3:54 AM, whodja wrote: > > > I had a very small deburring tool. I'm looking for a source to by another one. I've checked the usual sites. Unfortunately I think it came with tools I bought from a builder years ago. It was very short and great for small spaces. Any recommendations are greatly appreciated. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=463671#463671 > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv-list Browse Digests http://www.matronics.com/digest/rv-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.